Configured for dynamic vibration and static displacement tracking in machinery protection loops, the Bently Nevada 330104-08-16-10-02-00 (330104 Proximity Probes) provides direct physical/electrical execution. The hardware establishes a continuous high-frequency electromagnetic field over a target surface to transmit raw analog displacement indicators back to an associated monitoring chassis.

Physical and Electrical Parameters

Eddy-Current Probe Scaling and Rotor Dynamics

The 8 mm transducer assembly relies on precise eddy-current probe scaling configurations calibrated to AISI 4140 steel target materials. To guarantee measurement fidelity across the linear range, field personnel must execute gap voltage validation (-10 VDC targets) at the nominal mechanical center-point of the installation. Proper physical orientation minimizes magnetic interference anomalies, enabling internal cross-talk suppression metrics to isolate close-coupled radial channels. This structural stability supports continuous quantification of fluid-film bearing changes, allowing the terminal hardware to track high-velocity rotor dynamics without signal degradation.

Procurement Package Inventory

• One (1) Bently Nevada 3300 XL 8 mm proximity probe with integrated coaxial lead.
• Technical locknuts conforming to M10 thread parameters.
• Direct factory verification data certificate.

Field Installation Guidelines

• Shield Grounding Framework: Coaxial cable shield layers must be isolated completely from the machine casing or conduit plumbing. Grounding infrastructure requires single-point termination directly at the Proximitor sensor terminal block plate.
• Mechanical Thread Engagement: Thread the probe body into the mounting bracket or sleeve housing. Ensure a minimum of 5 full thread turns engagement to lock the probe head securely against machinery physical vibration.
• Side-Wall Clearance Limits: Avoid close physical proximity to surrounding non-target structural metals. Maintain an unthreaded radius clearance zone around the 8 mm tip face to prevent cross-talk noise and calibration disruption.

Packaging and Transportation Metrics

Delivery time: 3-5 days when payment finish, routed via DHL/FEDEX/UPS. Finished components are delivered enclosed inside anti-static industrial packaging to mitigate static discharge hazards. Double-shielded outer padding is utilized to maintain dimensional integrity and protect internal wire connections during transit.

Frequently Asked Questions

Q: Can the probe assembly undergo hot-swap replacement while the monitor slot is active?

A: No. Disconnecting or reconnecting the coaxial connection point while the Proximitor loop remains fully energized can trigger false over-scale diagnostic trips or transient voltage alerts on the system rack.

Q: What is the mechanical consequence if the target material deviates from AISI 4140 steel?

A: Deviations change the underlying eddy-current probe scaling performance, which causes an error in millivolt-per-mil scale sensitivity unless custom correction factors are applied inside the monitoring monitor card.

Q: How is correct position confirmed during mechanical installation?

A: Observe the DC voltage across the signal terminals; verify that the mechanical gap adjustment matches the target center value defined by the gap voltage validation (-10 VDC targets) profile.