The ABB YPK112A 3ASD573001A13, also cataloged as the YPK112A Communication Module, operates as a dedicated hardware component for executing personal computer communication and PAL-circuit signal processing within industrial control systems.

Part Number Breakdown & Configuration Matrix

Hardware Specifications

Backplane Bus & Network Communication Parameters

The hardware utilizes backplane bus communication velocity licences to maintain deterministic packet transfers across node racks. I/O density scaling capabilities allow operators to expand node connectivity without violating bus update intervals. Firmware flash compatibility ensures that low-level communication protocol stacks remain synchronized across distributed architectures during active process operations.

Package Contents & Ordering Info

• 1 x ABB YPK112A Communication Module (Part Number: 3ASD573001A13)
• 1 x ESD Protective Packaging Enclosure
• 1 x Technical Compliance Documentation Leaflet

Physical Installation & Grounding Guidelines

• Ensure system power is completely isolated before inserting or removing the printed circuit board from its designated slot.
• Align the board edge connector precisely with the backplane guide rails to prevent bending pins during insertion.
• Secure any board-level retention screws to maintain mechanical stability against continuous industrial vibration.
• Verify that grounding clips make firm contact with the chassis to suppress electromagnetic interference on communication lines.

Frequently Asked Questions

• Q: What is the primary operational function of this module within the control network?
• A: It serves as a PC communication board utilizing PAL-circuit architecture to handle internal data exchanges.
• Q: Does this communication board support live insertion and removal (hot-swapping)?
• A: Hot-swap capability depends entirely on the specific rack architecture and system power configuration.
• Q: What is the specified operating temperature range for the hardware?
• A: The module functions reliably within an ambient temperature range of 0 deg C to +55 deg C.
• Q: How does firmware management affect module operation?
• A: Firmware revisions must match the host controller requirements to ensure correct protocol stack execution.
• Q: What precautions are necessary during handling to prevent component damage?
• A: Operators must utilize standard electrostatic discharge (ESD) wrist straps and anti-static mats during maintenance.
• Q: Why must retention screws be fastened securely on the board?
• A: Fastening screws maintain low-impedance grounding and prevent the board from dislodging under high vibration.
• Q: Can this module be installed in non-ABB control racks?
• A: No, it is specifically engineered for compatibility with proprietary ABB industrial control hardware slots.
• Q: What standard maintenance procedures apply to this unit?
• A: Periodically inspect the board surface for dust accumulation and verify that edge connectors remain clean and oxidation-free.