GE Fanuc IC695PSA140E PACSystems RX3i 40W Power Supply
-
Dimensiones: 50.8 × 130 × 130 mm
-
País de origen: USA
-
Pago: T/T, Western Union
-
Puerto de embarque: Xiamen
The GE Fanuc IC695PSA140E is a 40W multi-purpose power supply for PACSystems RX3i Universal Backplanes. It accepts 85–264 VAC or 100–300 VDC input and provides +5.1 VDC, +24 VDC relay power, and +3.3 VDC outputs. Revision E incorporates improvements to undervoltage detection during power-up and a RoHS-related product update. The module supports load-sharing and redundancy configurations when installed according to the RX3i system requirements.
Product Overview
The IC695PSA140E belongs to the GE Fanuc PACSystems RX3i PLC product family. It supplies power to the RX3i Universal Backplane and compatible IC695-series modules.
The power supply provides three output rails:
- +5.1 VDC: Supplies power to the RX3i backplane.
- +24 VDC: Provides relay power for compatible output relay modules.
- +3.3 VDC: Supplies internal power to modules with IC695 catalog numbers.
The module occupies two backplane slots. Multiple compatible PSA140 and PSD140 power supplies can be used for load-sharing or redundancy, subject to the system's power configuration and compatibility restrictions.
Key Features
- 40W total output power capacity
- 120/240 VAC or 125 VDC nominal input
- Wide AC and DC input voltage ranges
- Three output rails: +5.1 VDC, +24 VDC, and +3.3 VDC
- Supports load-sharing and redundancy applications
- Supports up to four compatible PSA140/PSD140 supplies in an RX3i Universal Backplane
- Four status indicators for power, power-supply fault, overtemperature, and overload
- Input-to-backplane electrical isolation
- Two-slot Universal Backplane installation
- Revision E improvements to power-up undervoltage detection
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc |
| Product Family | PACSystems RX3i |
| Model Number | IC695PSA140E |
| Product Type | Multi-Purpose Power Supply |
| Nominal Input Voltage | 120/240 VAC or 125 VDC |
| AC Input Range | 85–264 VAC |
| DC Input Range | 100–300 VDC |
| Input Frequency | 50/60 Hz AC |
| Maximum Input Power | 70 W |
| Total Output Power | 40 W maximum |
| +5.1 VDC Output | 5.0–5.2 VDC, 6 A maximum |
| +3.3 VDC Output | 3.1–3.5 VDC, 9 A maximum |
| +24 VDC Relay Output | 19.2–28.8 VDC, 1.6 A maximum |
| Maximum Output Power at 5.1 VDC | 30 W |
| Maximum Output Power at 3.3 VDC | 30 W |
| Inrush Current | 4 A, 250 ms maximum |
| Input-to-Backplane Isolation | 250 VAC continuous; 1500 VAC for 1 minute |
| Output Ripple | 150 mV maximum |
| Output Noise | 150 mV maximum |
| Ride-Through Time | 20 ms |
| Terminal Wire Size | 14–22 AWG |
| Maximum Current per Terminal | 6 A |
| Backplane Occupancy | 2 slots |
| Compatible Backplane | PACSystems RX3i IC695 Universal Backplane |
| Maximum Compatible Supplies | Up to 4 PSA140/PSD140 supplies per Universal Backplane |
| Load Sharing | Supported |
| Redundancy | Supported, subject to compatibility restrictions |
| Status Indicators | Power, P/S Fault, Overtemperature, Overload |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5–95%, non-condensing |
| Product Dimensions | Approx. 50.8 × 130 × 130 mm |
| Product Weight | Approx. 0.91 kg |
Revision E Identification
The IC695PSA140E is a specific hardware revision of the IC695PSA140 power supply.
Its documented revision history includes:
- May 2013: Increased the margin of the 5 V and 3.3 V undervoltage detectors to help prevent power-supply faults during the power-up sequence.
- January 2016: RoHS conversion update with applicable exemptions.
These changes do not alter the module's form, fit, or function. When sourcing a replacement, check the complete catalog number and revision marking on the product label.
Load Sharing and Redundancy
The IC695PSA140E supports load-sharing and redundant power configurations in compatible PACSystems RX3i Universal Backplanes.
Up to four compatible PSA140 and/or PSD140 supplies can be installed in a Universal Backplane. This arrangement can provide additional power capacity or power-source redundancy, depending on the system design.
Important compatibility restriction: The IC695PSA140 cannot be used with IC695PSA040 or IC695PSD040 power supplies in redundant or increased-capacity configurations. Always check the installed power-supply combination before changing the rack configuration.
LED Indicators and Diagnostics
The front panel provides four status indicators for monitoring power-supply operation.
- POWER: Green indicates that power is being supplied to the backplane. Amber indicates that input power is present but the supply switch is off.
- P/S FAULT: Red indicates that the power supply has failed to provide sufficient backplane voltage.
- OVERTEMP: Amber indicates that the power supply is approaching or exceeding its maximum operating temperature.
- OVERLOAD: Amber indicates that at least one output is approaching or exceeding its maximum capacity.
The RX3i CPU can detect internal power-supply faults and record the corresponding fault information.
Installation and Wiring Guidance
The IC695PSA140E is designed for installation in a compatible PACSystems RX3i Universal Backplane.
Before installation, confirm the rack configuration and available power capacity.
- Verify that the backplane is an IC695 Universal Backplane.
- Confirm that the selected power-supply combination supports the intended load-sharing or redundancy arrangement.
- Check the AC or DC input source against the specified voltage range.
- Use suitable 14–22 AWG copper wiring for the input terminals.
- Follow the specified terminal torque and grounding requirements in the installation manual.
- Keep the protective terminal cover closed during normal operation.
- After energizing the system, check all four LED indicators and confirm that the backplane receives the required power.
Safety warning: The AC input terminals can carry hazardous voltage. Isolate the power source before wiring, replacing, or servicing the module. Follow the manufacturer's installation procedures and applicable electrical safety requirements.
Typical Applications
The IC695PSA140E is used in industrial automation systems built around the PACSystems RX3i PLC platform.
Typical applications include:
- Power generation and electrical control systems
- Industrial manufacturing automation
- Process control installations
- Oil and gas facilities
- Water and wastewater treatment
- Chemical and petrochemical plants
- PLC control cabinet power distribution
- Redundant and load-sharing control system architectures
System Compatibility
The IC695PSA140E is designed for GE Fanuc PACSystems RX3i Universal Backplanes using IC695-series modules.
Before ordering or replacing this power supply, verify:
- The installed backplane catalog number
- Total backplane power requirements
- Existing power-supply models and revisions
- Load-sharing or redundancy configuration
- AC or DC input requirements
- Compatibility with other installed power supplies
Do not assume that the IC695PSA140E is interchangeable with the IC695PSA040 or IC695PSD040 in redundant or increased-capacity configurations.
Benefits of Correct Replacement Selection
Selecting the correct power-supply revision helps maintain the intended RX3i backplane power configuration. Revision E also incorporates documented improvements to undervoltage detection during power-up.
For maintenance planning, confirm the complete part number, input voltage, output capacity, and existing rack configuration. These checks help reduce installation errors and avoid incompatible power-supply combinations.
Frequently Asked Questions
1. What is the GE Fanuc IC695PSA140E?
It is a 40W multi-purpose power supply for GE Fanuc PACSystems RX3i Universal Backplanes.
2. What input voltage does the IC695PSA140E support?
It supports 85–264 VAC or 100–300 VDC input. Its nominal ratings are 120/240 VAC or 125 VDC.
3. What are the output voltages?
The module provides +5.1 VDC, +24 VDC relay power, and +3.3 VDC outputs.
4. What is the total output power capacity?
The power supply provides up to 40W total output power. The available capacity depends on the output loading and operating conditions.
5. What is the difference between IC695PSA140 and IC695PSA140E?
The IC695PSA140E is a later hardware revision. Its documented changes include improved 5 V and 3.3 V undervoltage detection and a RoHS conversion update.
6. Can multiple IC695PSA140E modules be installed in one rack?
Yes. Up to four compatible PSA140 and/or PSD140 supplies can be used in an RX3i Universal Backplane, subject to the system configuration and power requirements.
7. Is the IC695PSA140E suitable for redundant applications?
Yes. It supports load-sharing and redundancy configurations. However, it cannot be used with IC695PSA040 or IC695PSD040 in redundant or increased-capacity configurations.
8. Which LED indicators are available?
The front panel provides POWER, P/S FAULT, OVERTEMP, and OVERLOAD indicators for monitoring operating status.
Related Products
- GE Fanuc IC695PSD140 – PACSystems RX3i 40W DC Power Supply
- GE Fanuc IC695PSA140 – PACSystems RX3i 40W Multi-Purpose Power Supply
- GE Fanuc IC695PSA040 – PACSystems RX3i 40W Power Supply
- GE Fanuc IC695CHS007 – RX3i 7-Slot Universal Backplane
- GE Fanuc IC695CHS012 – RX3i 12-Slot Universal Backplane
- GE Fanuc IC695CHS016 – RX3i 16-Slot Universal Backplane
Maxwell PLC no es un distribuidor, revendedor o representante autorizado de los productos que aparecen en este sitio web. Todos los nombres de productos, marcas comerciales, marcas y logotipos utilizados en este sitio son propiedad de sus respectivos dueños. La descripción, exhibición o venta de productos con estos nombres, marcas comerciales, marcas y logotipos tiene únicamente fines de identificación y no pretende indicar ninguna afiliación o autorización por parte de ningún titular de derechos.
Envíos y devoluciones
Envío
- Envío de emergencia: Envío el mismo día para pedidos en stock realizados antes de las 2:00 PM (GMT+8).
- Transportistas premium: Entrega global confiable a través de DHL, FedEx y UPS a más de 150 países.
- Opciones flexibles: Admitimos envíos a través de su propia cuenta de transportista (DHL/FedEx/UPS).
- Embalaje industrial: Protección ESD profesional y embalaje reforzado con absorción de impactos.
Devoluciones
- Plazo de 30 días: Solicite una devolución dentro de los 30 días posteriores a la recepción de los artículos elegibles.
- Condición: Los artículos deben estar en su estado original, sellados de fábrica y con todas las etiquetas.
- Proceso sin complicaciones: Póngase en contacto con sales@maxwellplc.com para obtener una etiqueta de devolución e instrucciones.
- Reembolsos rápidos: Los reembolsos aprobados se procesan a su método de pago original dentro de los 10 días.
Envíos y devoluciones
Envío
- Envío de emergencia: Envío el mismo día para pedidos en stock realizados antes de las 2:00 PM (GMT+8).
- Transportistas premium: Entrega global confiable a través de DHL, FedEx y UPS a más de 150 países.
- Opciones flexibles: Admitimos envíos a través de su propia cuenta de transportista (DHL/FedEx/UPS).
- Embalaje industrial: Protección ESD profesional y embalaje reforzado con absorción de impactos.
Devoluciones
- Plazo de 30 días: Solicite una devolución dentro de los 30 días posteriores a la recepción de los artículos elegibles.
- Condición: Los artículos deben estar en su estado original, sellados de fábrica y con todas las etiquetas.
- Proceso sin complicaciones: Póngase en contacto con sales@maxwellplc.com para obtener una etiqueta de devolución e instrucciones.
- Reembolsos rápidos: Los reembolsos aprobados se procesan a su método de pago original dentro de los 10 días.
Garantía
Garantía
- Garantía de 12 meses: Una garantía completa de un año cubre todos los defectos funcionales.
- Autenticidad: Cada pieza está garantizada como 100% original, completamente nueva y auténtica.
- Soporte experto: Asistencia técnica dedicada para verificar y resolver cualquier problema de hardware.
- Tranquilidad: Soporte de fiabilidad a largo plazo para todas sus piezas de automatización de misión crítica.
Garantía
Garantía
- Garantía de 12 meses: Una garantía completa de un año cubre todos los defectos funcionales.
- Autenticidad: Cada pieza está garantizada como 100% original, completamente nueva y auténtica.
- Soporte experto: Asistencia técnica dedicada para verificar y resolver cualquier problema de hardware.
- Tranquilidad: Soporte de fiabilidad a largo plazo para todas sus piezas de automatización de misión crítica.
Pago seguro
Pago seguro
- T/T flexible: 100% T/T para artículos en stock; 30% de depósito / 70% de saldo para pedidos con plazo de entrega.
- Amigable a nivel local: Se aceptan transferencias en RMB si tiene un agente local en China.
- Mejor precio: Nuestra Garantía de Mejor Precio le asegura que obtendrá las tarifas más competitivas del mercado.
- Seguridad de datos: Todas las transacciones se procesan a través de canales bancarios cifrados y seguros.
Pago seguro
Pago seguro
- T/T flexible: 100% T/T para artículos en stock; 30% de depósito / 70% de saldo para pedidos con plazo de entrega.
- Amigable a nivel local: Se aceptan transferencias en RMB si tiene un agente local en China.
- Mejor precio: Nuestra Garantía de Mejor Precio le asegura que obtendrá las tarifas más competitivas del mercado.
- Seguridad de datos: Todas las transacciones se procesan a través de canales bancarios cifrados y seguros.