Foxboro FCM100ET P0926GS Fieldbus Communications Module
-
Dimensions: 10.2 x 10.4 x 4.5 cm
-
Country of origin: France
-
Payment: T/T, Western Union
-
Shipping port: Xiamen
The Foxboro FCM100ET, part number P0926GS, is a Fieldbus Communications Module for the Foxboro I/A Series control system. It provides a communication interface between the 100 Mbps Ethernet control network and the 2 Mbps HDLC Module Fieldbus. The module connects DIN rail-mounted Fieldbus Modules (FBMs) with the Z-Module Control Processor 270 (ZCP270). It also supports redundant operation through Master and Tracker modules, helping maintain fieldbus communications when a module fault occurs.
Product Overview
The FCM100ET is designed for industrial distributed control system communication infrastructure. It transfers data between Ethernet-based control networks and the HDLC fieldbus used by connected FBMs.
In a redundant installation, two FCM100ET modules operate together. One module acts as the active Master, while the other operates as the Tracker and monitors system activity.
If the active module experiences a detected failure, the system can automatically reverse the Master and Tracker roles. This architecture supports communication continuity in demanding process automation applications.
The FCM100ET connects to the control network through fiber-optic Ethernet connections. Its fieldbus interface uses a 2 Mbps HDLC communication bus.
Key Features
- Foxboro I/A Series Fieldbus Communications Module
- Manufacturer part number P0926GS
- 100 Mbps Ethernet communication
- 2 Mbps HDLC Module Fieldbus communication
- Connects FBMs with the ZCP270 control processor
- Supports redundant Master/Tracker operation
- Automatic Master/Tracker role reversal following detected failures
- Fiber-optic Ethernet network connection
- Supports up to 32 FBMs per FCM100ET
- Front-panel LEDs indicate communication activity and module status
- Removable from the baseplate without removing power
- Designed for DIN rail-mounted Modular Baseplates
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Foxboro |
| Model | FCM100ET |
| Part Number | P0926GS |
| Product Type | Fieldbus Communications Module |
| System Family | Foxboro I/A Series |
| Primary Function | Ethernet-to-Fieldbus Communication |
| Ethernet Transmission Rate | 100 Mbps |
| Module Fieldbus Protocol | HDLC |
| Module Fieldbus Transmission Rate | 2 Mbps |
| Control Processor Interface | ZCP270 |
| Fieldbus Module Capacity | Up to 32 FBMs per FCM100ET |
| Redundancy | Master / Tracker configuration |
| Ethernet Connection | Fiber Optic |
| Fiber Type | Multimode Fiber, 62.5/125 μm |
| Fiber Connector | LC ceramic connector |
| Fiber Transmission Distance | Up to 2 km |
| Input Voltage | 24 VDC (+5%, -10%) |
| Maximum Power Consumption | 7 W at 24 VDC |
| Operating Temperature | 0 to +50°C |
| Storage Temperature | -40 to +70°C |
| Relative Humidity | 5–95%, non-condensing |
| Contamination Rating | Class G3, ISA S71.04 |
| Mounting | Modular Baseplate |
| Installation Position | Horizontal or vertical |
| Product Height | 102 mm |
| Height Including Mounting Lugs | 114 mm |
| Product Width | 45 mm |
| Product Depth | 104 mm |
| Product Net Weight | Approximately 284 g |
| Manufacturer | Foxboro |
Communication Architecture
The FCM100ET connects the Ethernet control network to the I/A Series Module Fieldbus.
Its two communication layers perform different functions:
Ethernet Network
The module communicates with the ZCP270 through a 100 Mbps Ethernet network. Fiber-optic connections provide extended transmission distances and help reduce electromagnetic interference.
Module Fieldbus
The module interfaces with the 2 Mbps HDLC bus used by the FBMs. This communication path allows fieldbus modules to exchange data with the control processor.
Redundant Communication
A redundant arrangement uses two FCM100ET modules and a pair of optical splitter/combiners. The active Master handles communications, while the Tracker monitors the system.
Redundant Operation
The FCM100ET supports redundant fieldbus communication through a Master/Tracker configuration.
The Master module performs active communication functions. Meanwhile, the Tracker monitors the active module and remains available for role reversal.
When the system detects a qualifying failure, the modules can automatically switch roles. System Management software also allows users to change the roles manually.
For each FBM grouping, a pair of FCM100ET modules is required in the documented redundant configuration. Each grouping can contain up to 32 FBMs, subject to ZCP270 sizing constraints.
Installation and Compatibility
The FCM100ET mounts on a compatible Foxboro Modular Baseplate. The baseplate supports DIN rail installation and can be configured horizontally or vertically.
For redundant installations, the two modules must occupy adjacent odd and even positions. Supported slot combinations include positions 1 and 2, 3 and 4, 5 and 6, or 7 and 8.
Before installation, verify the following:
- The system uses a compatible Foxboro I/A Series architecture.
- The control processor supports the FCM100ET configuration.
- The installed Modular Baseplate is suitable for this module.
- The Ethernet fiber connections match the required network arrangement.
- The 24 VDC power supply meets the specified input range.
- Redundant configurations include the required companion module and splitter/combiner assemblies.
The FCM100ET can be removed or replaced without removing power from the baseplate. However, replacement should follow the site's maintenance and system safety procedures.
Frequently Asked Questions
1. What is the Foxboro FCM100ET P0926GS?
It is a Fieldbus Communications Module used in the Foxboro I/A Series system to connect Ethernet control networks with the 2 Mbps HDLC Module Fieldbus.
2. What communication speeds does the FCM100ET support?
It supports 100 Mbps Ethernet communication and 2 Mbps HDLC Module Fieldbus communication.
3. Which controller is compatible with the FCM100ET?
The product specification identifies the Z-Module Control Processor 270 (ZCP270) as its control processor interface.
4. Does the FCM100ET support redundant operation?
Yes. Two modules can operate in a Master/Tracker configuration, with automatic role reversal when qualifying failures are detected.
5. How many FBMs can one FCM100ET support?
The documented maximum is 32 FBMs per FCM100ET, subject to the control processor's sizing constraints.
6. What power supply does the FCM100ET require?
It requires 24 VDC, with an input tolerance of +5% and -10%. Maximum power consumption is 7 W.
7. What are the dimensions and weight of the FCM100ET?
The module measures approximately 102 × 45 × 104 mm. Its height is 114 mm when including mounting lugs, and its approximate weight is 284 g.
8. Can the FCM100ET be replaced without removing power?
Yes. Foxboro product documentation states that the module can be removed or replaced from its baseplate without removing power. Follow the applicable maintenance procedures.
Related Foxboro Products
The following components are associated with the FCM100ET installation architecture:
- Foxboro ZCP270 – Z-Module Control Processor
- Foxboro Modular Baseplate – DIN Rail Mounted Module Baseplate
- Foxboro FBM Series – Fieldbus Modules
- Foxboro FCM100E – Fieldbus Communications Module
- Foxboro FCM100ET Splitter/Combiner – Redundant Fiber-Optic Network Component
Maxwell PLC is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Shipping & Returns
Shipping
- Emergency Dispatch: Same-day shipping for in-stock orders placed before 2:00 PM (GMT+8).
- Premium Carriers: Reliable global delivery via DHL, FedEx, and UPS to 150+ countries.
- Flexible Options: We support shipping via your own carrier account (DHL/FedEx/UPS).
- Industrial Packaging: Professional ESD protection and reinforced shock-absorbent packaging.
Returns
- 30-Day Window: Request a return within 30 days of receipt for eligible items.
- Condition: Items must be in their original, factory-sealed condition with all tags.
- Hassle-Free Process: Contact sales@maxwellplc.com for a return label and instructions.
- Fast Refunds: Approved refunds are processed to your original payment method within 10 days.
Shipping & Returns
Shipping
- Emergency Dispatch: Same-day shipping for in-stock orders placed before 2:00 PM (GMT+8).
- Premium Carriers: Reliable global delivery via DHL, FedEx, and UPS to 150+ countries.
- Flexible Options: We support shipping via your own carrier account (DHL/FedEx/UPS).
- Industrial Packaging: Professional ESD protection and reinforced shock-absorbent packaging.
Returns
- 30-Day Window: Request a return within 30 days of receipt for eligible items.
- Condition: Items must be in their original, factory-sealed condition with all tags.
- Hassle-Free Process: Contact sales@maxwellplc.com for a return label and instructions.
- Fast Refunds: Approved refunds are processed to your original payment method within 10 days.
Warranty
Warranty
- 12-Month Guarantee: A comprehensive one-year warranty covers all functional defects.
- Authenticity: Every part is guaranteed 100% original, brand-new, and genuine.
- Expert Support: Dedicated technical assistance to verify and resolve any hardware issues.
- Peace of Mind: Long-term reliability support for all your mission-critical automation parts.
Warranty
Warranty
- 12-Month Guarantee: A comprehensive one-year warranty covers all functional defects.
- Authenticity: Every part is guaranteed 100% original, brand-new, and genuine.
- Expert Support: Dedicated technical assistance to verify and resolve any hardware issues.
- Peace of Mind: Long-term reliability support for all your mission-critical automation parts.
Secure Payment
Secure Payment
- Flexible T/T: 100% T/T for stock items; 30% deposit / 70% balance for lead-time orders.
- Local Friendly: RMB transfers are accepted if you have a local agent in China.
- Best Price: Our Best Price Guarantee ensures you get the most competitive market rates.
- Data Safety: All transactions are processed through encrypted and secure banking channels.
Secure Payment
Secure Payment
- Flexible T/T: 100% T/T for stock items; 30% deposit / 70% balance for lead-time orders.
- Local Friendly: RMB transfers are accepted if you have a local agent in China.
- Best Price: Our Best Price Guarantee ensures you get the most competitive market rates.
- Data Safety: All transactions are processed through encrypted and secure banking channels.