C200HW-PD024 Omron Power Supply Module

Omron

C200HW-PD024 Omron Power Supply Module C200HX/HG/HE Series

SKU: C200HW-PD024

In Stock

Dimensions: 130 mm x 45 mm x 100 mm
Country of origin: Japan
Payment: T/T, Western Union
Shipping port: Xiamen

Categories : All Products, Omron, Power Supply Modules

Tags : Omron C200HX/HG/HE, Power Supply Modules

1 years warranty

Delivery time: 3-7 business days

Free 30 days return

If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, withing 24 hours on weekdays.

Customer service

All questions about your order, return and delivery must be sent to our customer service team by e-mail at yourstore@yourdomain.com

Sale & Press

If you are interested in selling our products, need more information about our brand or wish to make a collaboration, please contact us at press@yourdomain.com

The Omron C200HW-PD024, also cataloged as the C200HW-PD024 Power Supply Module, operates as a dedicated hardware component for direct DC input voltage regulation and backplane power distribution within C200HX/HG/HE PLC rack systems.

Model Nomenclature Breakdown

C200HW: System chassis power supply platform prefix
P: Power supply module designation
D024: 24 VDC nominal primary input voltage specification

Performance & Hardware Metrics

Parameter	Specification
Model	C200HW-PD024
Brand	Omron
Origin	Japan
Weight	0.60 kg
Base Unit Dimensions	130 mm x 45 mm x 100 mm
Shipping Dimensions	200 mm x 150 mm x 80 mm (Shipping weight: 0.85 kg)
Operating Temp	0 deg C to 55 deg C
Power Consumption	Max 50 W (Operating input power)
Input Voltage	24 VDC (Operating range: 19.2 VDC to 28.8 VDC)
Output Capacity	5 VDC at 4.6 A, 24 VDC at 0.8 A
Insulation Resistance	20 Mohm min. at 500 VDC between DC terminals and GR terminal
Dielectric Strength	1000 VAC 50/60 Hz for 1 min between DC terminals and GR terminal

Architecture Integration & Communication

The power supply unit converts incoming DC potential to stabilized backplane operating logic voltages, maintaining deterministic bus execution across high-density I/O configurations. Regulated internal supply rails ensure backplane bus communication velocity Licences remain uninterrupted during rapid network polling over Profinet / EtherNet/IP deterministic networks. Maintaining full firmware flash compatibility, the unit isolates central CPU logic operations from external field supply fluctuations during modular I/O density scaling.

System Shipment Contents

1 x C200HW-PD024 Power Supply Module Assembly
1 x Terminal Block Protective Cover Plate
1 x Hardware Mounting Sheet

Mounting Protocols & Field Wiring

Chassis Installation

Align the rear module hooks with the mounting slots on the left-most position of the C200HX/HG/HE backplane rack.
Rotate the housing downward until the bottom mounting mechanism snaps securely into place, then tighten the securing screw to 0.8 N m torque.

Power Terminal Wiring

Strip external 24 VDC supply leads to 7 mm and connect them to the M3.5 screw terminal block.
Connect the LG (Line Ground) and GR (Ground) terminals to a dedicated functional earth ground using minimum 2.0 mm2 wire.

Technical Questions & Answers

What is the required input voltage specification for this module?

The unit operates on a nominal 24 VDC supply with an allowable operating range of 19.2 VDC to 28.8 VDC.
What output currents are supplied directly to the PLC backplane?

The module delivers up to 4.6 A at 5 VDC for logic circuits and 0.8 A at 24 VDC for field output interface loops.
How is the module secured to the main CPU rack chassis?

The unit hooks onto the far-left slot of the backplane and fastens using a captive bottom mounting screw.
What wire gauge is recommended for the power input terminals?

Use stranded copper conductors between 1.25 mm2 and 2.0 mm2 fitted with spade or ring crimp lugs.
What dielectric isolation level does the power unit provide?

The unit withstands 1000 VAC at 50/60 Hz for 1 minute between the DC input terminals and the ground terminal.
Does this power supply support hot-swapping while the system is energized?

No, primary power must be fully isolated before removing or installing the module on the backplane.
What is the recommended grounding procedure for the GR terminal?

Connect the GR terminal directly to an independent earth ground point with an impedance below 100 ohms.
How does the module handle temporary input voltage dips?

The internal power circuit maintains continuous output regulation through momentary power drops up to 10 ms.

Shipping

Emergency Dispatch: Same-day shipping for in-stock orders placed before 2:00 PM (GMT+8).
Premium Carriers: Reliable global delivery via DHL, FedEx, and UPS to 150+ countries.
Flexible Options: We support shipping via your own carrier account (DHL/FedEx/UPS).
Industrial Packaging: Professional ESD protection and reinforced shock-absorbent packaging.

Returns

30-Day Window: Request a return within 30 days of receipt for eligible items.
Condition: Items must be in their original, factory-sealed condition with all tags.
Hassle-Free Process: Contact sales@maxwellplc.com for a return label and instructions.
Fast Refunds: Approved refunds are processed to your original payment method within 10 days.

Warranty

12-Month Guarantee: A comprehensive one-year warranty covers all functional defects.
Authenticity: Every part is guaranteed 100% original, brand-new, and genuine.
Expert Support: Dedicated technical assistance to verify and resolve any hardware issues.
Peace of Mind: Long-term reliability support for all your mission-critical automation parts.

Secure Payment

Flexible T/T: 100% T/T for stock items; 30% deposit / 70% balance for lead-time orders.
Local Friendly: RMB transfers are accepted if you have a local agent in China.
Best Price: Our Best Price Guarantee ensures you get the most competitive market rates.
Data Safety: All transactions are processed through encrypted and secure banking channels.