The Bently Nevada 330173-00-02-10-02-05, also cataloged as the 330173 Proximity Probes, operates as a dedicated hardware component for non-contacting displacement measurement within 3300 Series platforms. The hardware establishes a high-frequency electromagnetic field over its 5 mm tip configuration to monitor variations in proximity relative to a conductive target surface, converting mechanical shaft motion directly into analog voltage feedback loops.

Suffix Option Breakdown

• 330173: Base designator for the 3300 5mm proximity probe system loop (M8 x 1 metric thread, without armor).
• 00: Unthreaded length option designating 0.0 mm.
• 02: Overall case length option determining a 20 mm physical housing limit.
• 10: Total length option specifying a 1.0 meter (3.3 feet) integrated standard cable line.
• 02: Connector option determining a miniature coaxial ClickLoc connector layout.
• 05: Agency approval configuration selecting multiple international certification matrices (including CSA, ATEX, and IECEx).

Hardware Specifications

Mechanical Monitoring & TSI Characteristics

Continuous signal integrity across the 1.0 meter assembly relies on defined eddy-current probe scaling coefficients, maintaining linearity over the sensor tip area. Field validation procedures utilize static gap voltage validation (-10 VDC targets) benchmarks to confirm correct electrical positioning within the linear operating band. This low-impedance connection ensures the transmission of rapid frequency fluctuations associated with high-speed rotor dynamics, while internal coaxial shielding properties maintain high cross-talk suppression safety factors inside high-density multi-probe installations.

Ordering Info

• 1 x 330173-00-02-10-02-05 Proximity Probe Unit
• 1 x Miniature Coaxial Terminal Insulator Sleeve

Field Installation Guidelines

Thread Engagement and Physical Alignment

• Thread the M8 x 1 sensor housing smoothly into the machine bracket interface, ensuring at least 5 full threads of engagement to withstand structural machine vibration forces.
• Adjust the installation gap relative to the target shaft until the monitoring instrumentation registers the calibrated static bias voltage before torquing down the locking nut.

Cable Routing and Shield Termination

• Route the unarmored 1.0 meter flexible lead through dedicated low-voltage instrument conduits, ensuring all bends respect standard minimum radius restrictions.
• Connect the outer coaxial shield element strictly at the destination rack common ground plane to eliminate potential electrical noise loops.

Frequently Asked Questions

• Is live hot-swap disconnection of this coaxial transducer loop safe while the system is powered?

  Yes, the hardware loop configuration permits live hot-swap replacement or calibration checking without introducing component damage or causing monitor hardware faults.

• How does the 5 mm tip diameter affect standard eddy-current probe scaling performance?

  The 5 mm tip concentrates the electromagnetic field envelope, providing precise scaling over a narrower displacement window compared to larger 8 mm or 25 mm probe configurations.

• What problem occurs if field modifications alter the calibrated 1.0 meter cable path?

  Trimming or splicing the coaxial line changes the calibrated total capacitance and impedance parameters, which skews system tuning and causes signal tracking measurement errors.

• What is the maximum safe thermal ceiling for this proximity probe body assembly?

  The high-temperature jacket and core components maintain rated electrical and mechanical tracking properties up to an operating limit of +177 deg C.

• How is cross-talk suppression optimized when deploying multiple 5 mm probes together?

  Field engineers must enforce minimum cross-axis clearance spacing between adjacent sensor tips to prevent their high-frequency magnetic fields from bleeding into each other.

• Does this probe require a direct external DC operating voltage input hookup?

  No, this transducer is entirely passive, receiving its raw high-frequency RF excitation signal directly from the connected 3300 Series Proximitor module.

• What mechanical failure occurs if the housing is secured with less than 5 threads of engagement?

  Insufficient thread engagement allows structural vibrations to loosen the assembly, resulting in gap calibration drift or serious mechanical thread stripping damage.

• How is the -10 VDC targets parameter utilized during field gap voltage validation procedures?

  Technicians measure this DC bias voltage to verify that the physical air gap places the probe face precisely in the center of its linear calibration window.