Siemens 6ES7431-1KF10-0AB0 SIMATIC S7-400 SM 431 Analog Input Module
-
Dimensions: 25 × 290 × 210 mm
-
Country of origin: Germany
-
Payment: T/T, Western Union
-
Shipping port: Xiamen
The Siemens 6ES7431-1KF10-0AB0 is an SM 431 analog input module designed for SIMATIC S7-400 PLC systems. It provides eight analog input channels for voltage and current measurement, with four channels additionally supporting resistance, thermocouple, and resistance thermometer measurements. The module offers 14-bit resolution, increasing to 16 bits when filtering is activated. It supports applications requiring flexible process signal acquisition across industrial automation systems.
Product Overview
The 6ES7431-1KF10-0AB0 belongs to the Siemens SIMATIC S7-400 SM 431 analog input module family. It acquires different types of analog signals from field instruments and makes the measured values available to the PLC control system.
The module provides eight channels for voltage and current measurement. Four of these channels can also be configured for resistance measurement, thermocouples, and resistance thermometers.
This flexibility makes the module suitable for applications combining conventional process transmitters with temperature and resistance-based instruments. Supported temperature sensors include various thermocouple types and Pt100 resistance thermometers.
Key Features
- Siemens SIMATIC S7-400 SM 431 analog input module
- Eight analog input channels
- 14-bit resolution with overrange
- Up to 16-bit resolution with activated filtering
- Voltage and current measurement on eight channels
- Resistance, thermocouple, and RTD measurement on four channels
- Supports 0–20 mA and 4–20 mA signals
- Supports multiple voltage measurement ranges
- Compatible with Pt100, Pt200, Pt500, Pt1000, Ni100, and Ni1000 sensors
- 24 VDC load voltage for supplying two-wire transmitters
- Typical power loss of 3.5 W
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Siemens |
| Product Family | SIMATIC S7-400 |
| Module Series | SM 431 |
| Order Number | 6ES7431-1KF10-0AB0 |
| Product Type | Analog Input Module |
| Number of Analog Inputs | 8 |
| Voltage / Current Measurement | 8 channels |
| Resistance Measurement | 4 channels |
| Thermocouple Measurement | 4 channels |
| Resistance Thermometer Measurement | 4 channels |
| Resolution | 14-bit |
| Resolution with Filtering | Up to 16-bit |
| Voltage Input Ranges | ±80 mV, ±250 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V, 1–5 V |
| Current Input Ranges | 0–20 mA, 4–20 mA |
| Resistance Input Ranges | 0–48 Ω, 0–150 Ω, 0–300 Ω, 0–600 Ω, 0–6000 Ω |
| Thermocouple Types | B, E, J, K, L, N, R, S, T, U |
| Resistance Thermometers | Pt100, Pt200, Pt500, Pt1000, Pt10000, Ni100, Ni1000 |
| Load Voltage L+ | 24 VDC, required for supplying two-wire transmitters |
| Maximum Current from L+ | 200 mA |
| Maximum Backplane Bus Current | 600 mA at 5 VDC |
| Typical Power Loss | 3.5 W |
| Basic Conversion Time | 20.1 / 23.5 ms |
| Interference Frequency Suppression | 50 / 60 Hz |
| Maximum Shielded Cable Length | 200 m; 50 m for thermocouples and input ranges ≤80 mV |
| Potential Separation | Between analog section and backplane bus; not between individual channels |
| Dimensions (W × H × D) | 25 × 290 × 210 mm |
| Product Weight | Approx. 0.50 kg |
| Installation | SIMATIC S7-400 PLC rack |
| Application | Industrial analog signal acquisition |
Analog Signal Measurement Capabilities
The SM 431 supports several input signal categories, allowing different field instruments to connect to the same module type.
Voltage Measurement
The module supports multiple voltage ranges, including ±80 mV, ±250 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V, and 1–5 V. These ranges accommodate different process measurement and instrumentation requirements.
Current Measurement
The module accepts 0–20 mA and 4–20 mA signals. It supports two-wire and four-wire transmitter connections, making it suitable for common industrial process transmitters.
Resistance and Temperature Measurement
Four channels support resistance-based measurement and temperature sensing. Compatible sensors include Pt100, Pt200, Pt500, Pt1000, Ni100, and Ni1000 resistance thermometers.
The module also supports thermocouple types B, E, J, K, L, N, R, S, T, and U. External temperature compensation can be configured using a Pt100 sensor or compensation socket.
Resolution and Signal Processing
The module provides a maximum resolution of 14 bits, including overrange and sign. When filtering is activated, the resolution can reach 16 bits.
Integration time is parameterizable, allowing the module to be configured according to signal acquisition requirements. It also provides 50 Hz and 60 Hz interference suppression to help reduce the influence of common power-frequency interference.
The basic conversion time is specified as 20.1 or 23.5 ms, depending on the configured operating conditions.
Typical Applications
- Industrial process temperature monitoring
- Chemical and petrochemical process control
- Power generation instrumentation
- Oil and gas process measurement
- Pressure and flow transmitter signal acquisition
- Resistance temperature detector monitoring
- Thermocouple temperature measurement
- Industrial machinery monitoring
- Existing SIMATIC S7-400 system maintenance
System Compatibility
The 6ES7431-1KF10-0AB0 is designed for the Siemens SIMATIC S7-400 PLC platform. It occupies one module slot in the S7-400 rack.
Before installation, verify the CPU and rack configuration, module addressing, signal wiring, and channel parameters. The selected input type must match the connected field instrument.
Although the module supports several signal types, the resistance, thermocouple, and resistance thermometer functions are limited to four channels. Confirm the channel allocation before designing or modifying an I/O configuration.
Installation and Configuration Guidance
Install the module in a compatible SIMATIC S7-400 rack following Siemens installation instructions.
Before commissioning:
- Verify the complete order number 6ES7431-1KF10-0AB0.
- Confirm the available rack slot and system configuration.
- Check the required signal type for each input channel.
- Configure the appropriate voltage or current measurement range.
- Set thermocouple or RTD parameters where applicable.
- Verify transmitter power requirements and wiring.
- Use suitable shielded signal cables.
- Check grounding and potential separation requirements.
- Validate measured values during commissioning.
The module does not provide channel-to-channel galvanic isolation. Its documented potential separation applies between the analog section and other specified system potentials. Follow Siemens wiring and isolation requirements when connecting field instruments.
Product Lifecycle Information
According to the Siemens product lifecycle information supplied for this model, phase-out began on October 1, 2025, and product cancellation took effect on October 1, 2026.
As of November 2026, the module should be treated as a discontinued product for replacement and maintenance planning. Existing installations may continue using the module, subject to system condition and application requirements.
Frequently Asked Questions
1. What is the Siemens 6ES7431-1KF10-0AB0?
It is an SM 431 analog input module designed for Siemens SIMATIC S7-400 PLC systems.
2. How many analog input channels does this module provide?
It provides eight analog input channels for voltage and current measurement. Four channels additionally support resistance, thermocouple, and resistance thermometer measurements.
3. What is the resolution of the 6ES7431-1KF10-0AB0?
The module provides 14-bit resolution, with up to 16-bit resolution when filtering is activated.
4. Does this module support 4–20 mA signals?
Yes. It supports both 0–20 mA and 4–20 mA current input ranges.
5. Which thermocouple types are supported?
Supported types include B, E, J, K, L, N, R, S, T, and U.
6. Can the module measure Pt100 temperature sensors?
Yes. It supports Pt100 and several other resistance thermometer types, including Pt200, Pt500, Pt1000, Ni100, and Ni1000.
7. Does the module require an external 24 VDC supply?
The 24 VDC load voltage is required when supplying two-wire transmitters. The module also draws power from the S7-400 backplane bus.
8. Is the 6ES7431-1KF10-0AB0 discontinued?
According to the lifecycle information supplied, cancellation took effect on October 1, 2026. Verify current availability before planning a replacement purchase.
Related Products
- Siemens 6ES7431-1KF00-0AB0 SM 431 Analog Input Module
- Siemens 6ES7431-1KF20-0AB0 SM 431 Analog Input Module
- Siemens 6ES7431-7KF00-0AB0 SM 431 Analog Input Module
- Siemens SIMATIC S7-400 Central Processing Units
- Siemens SIMATIC S7-400 Signal Modules
Maxwell PLC is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Shipping & Returns
Shipping
- Emergency Dispatch: Same-day shipping for in-stock orders placed before 2:00 PM (GMT+8).
- Premium Carriers: Reliable global delivery via DHL, FedEx, and UPS to 150+ countries.
- Flexible Options: We support shipping via your own carrier account (DHL/FedEx/UPS).
- Industrial Packaging: Professional ESD protection and reinforced shock-absorbent packaging.
Returns
- 30-Day Window: Request a return within 30 days of receipt for eligible items.
- Condition: Items must be in their original, factory-sealed condition with all tags.
- Hassle-Free Process: Contact sales@maxwellplc.com for a return label and instructions.
- Fast Refunds: Approved refunds are processed to your original payment method within 10 days.
Shipping & Returns
Shipping
- Emergency Dispatch: Same-day shipping for in-stock orders placed before 2:00 PM (GMT+8).
- Premium Carriers: Reliable global delivery via DHL, FedEx, and UPS to 150+ countries.
- Flexible Options: We support shipping via your own carrier account (DHL/FedEx/UPS).
- Industrial Packaging: Professional ESD protection and reinforced shock-absorbent packaging.
Returns
- 30-Day Window: Request a return within 30 days of receipt for eligible items.
- Condition: Items must be in their original, factory-sealed condition with all tags.
- Hassle-Free Process: Contact sales@maxwellplc.com for a return label and instructions.
- Fast Refunds: Approved refunds are processed to your original payment method within 10 days.
Warranty
Warranty
- 12-Month Guarantee: A comprehensive one-year warranty covers all functional defects.
- Authenticity: Every part is guaranteed 100% original, brand-new, and genuine.
- Expert Support: Dedicated technical assistance to verify and resolve any hardware issues.
- Peace of Mind: Long-term reliability support for all your mission-critical automation parts.
Warranty
Warranty
- 12-Month Guarantee: A comprehensive one-year warranty covers all functional defects.
- Authenticity: Every part is guaranteed 100% original, brand-new, and genuine.
- Expert Support: Dedicated technical assistance to verify and resolve any hardware issues.
- Peace of Mind: Long-term reliability support for all your mission-critical automation parts.
Secure Payment
Secure Payment
- Flexible T/T: 100% T/T for stock items; 30% deposit / 70% balance for lead-time orders.
- Local Friendly: RMB transfers are accepted if you have a local agent in China.
- Best Price: Our Best Price Guarantee ensures you get the most competitive market rates.
- Data Safety: All transactions are processed through encrypted and secure banking channels.
Secure Payment
Secure Payment
- Flexible T/T: 100% T/T for stock items; 30% deposit / 70% balance for lead-time orders.
- Local Friendly: RMB transfers are accepted if you have a local agent in China.
- Best Price: Our Best Price Guarantee ensures you get the most competitive market rates.
- Data Safety: All transactions are processed through encrypted and secure banking channels.