Product Overview

The Honeywell 51305489‑500 Ethernet cable is engineered for high‑speed, deterministic communication between controllers, I/O modules, and supervisory stations in demanding industrial automation environments. Designed specifically for PlantCruise and Experion PKS distributed control systems, it ensures stable data exchange under high electromagnetic interference and continuous 24/7 operation. With precision‑manufactured connectors and rugged shielding, this cable preserves signal integrity across extended distances, supporting critical process control, safety systems, and real‑time monitoring applications where downtime is not an option.

Cable Architecture & Performance

The 51305489‑500 utilizes high‑grade twisted‑pair conductors with industrial‑rated PVC or LSZH jacketing, depending on application requirements. Foil and braid shielding deliver superior noise immunity in electrically noisy environments such as turbine halls and compressor stations. Precision‑molded RJ‑45 connectors maintain consistent impedance matching, minimizing return loss and crosstalk. Rated for high‑speed industrial Ethernet protocols, it supports full‑duplex operation and deterministic data transfer, ensuring synchronization across multi‑node control architectures without packet loss.

Technical Specifications

Installation Guidance

Route the 51305489‑500 away from high‑voltage power lines to minimize electromagnetic coupling. Maintain a minimum bend radius of 4× the cable diameter to prevent conductor stress. Secure connectors fully into port housings until locking tabs engage. For outdoor or washdown areas, use conduit or protective sleeves to shield from moisture and chemicals. Verify pin‑out continuity with a certified cable tester before commissioning to ensure compliance with system topology requirements.

Engineering Advantages

This cable retains mechanical and electrical stability in extreme plant conditions, resisting vibration, oil exposure, and temperature cycling without degradation. Its shielding design sustains signal fidelity even in close proximity to large motors and switchgear. Full compatibility with Honeywell’s control ecosystem eliminates interoperability issues, allowing seamless integration into both legacy and modern DCS infrastructures. The robust construction ensures long service life with minimal maintenance, reducing lifecycle costs for critical automation networks.

Ordering Info

(1) Honeywell 51305489‑500 Ethernet Cable – Original Factory Sealed

(2) Protective Cable Tie Set

(3) Certificate of Conformance

(4) Anti‑static industrial packaging

Logistics & Dispatch

Orders ship within 3–5 days after payment clearance via DHL, FedEx, or UPS. Each cable is encased in anti‑static, abrasion‑resistant packaging to prevent electrostatic discharge and physical damage in transit. Tracking numbers are issued immediately upon dispatch for end‑to‑end shipment visibility.

Technical FAQs

Q1: Is the 51305489‑500 compatible with non‑Honeywell equipment?

A1: Yes, provided the devices support standard RJ‑45 industrial Ethernet protocols within the cable’s electrical specifications.

Q2: Can this cable be used outdoors without additional protection?

A2: Outdoor use requires conduit or UV‑resistant covering unless the LSZH variant is specified for environmental exposure.

Q3: What is the maximum supported data rate?

A3: The cable supports up to 1 Gbps full‑duplex operation over its rated length.

Q4: Does it support redundant network topologies?

A4: Yes, it integrates seamlessly into ring or star topologies commonly deployed in Honeywell DCS networks.