The ABB EI813F 3BDH000022R1, also cataloged as the EI813F Ethernet Fieldbus Module, operates as a dedicated hardware component for 10BaseT Ethernet communication tasks within AC800F networks.

Model Matrix and Designation Breakdown

• Base model designation: EI813F representing the Ethernet fieldbus module variant.
• Part number identifier: 3BDH000022R1 specifying the exact manufacturing production build.
• Network interface: Supports 10BaseT Ethernet physical layer data transmission at 10 Mbps.
• System integration: Designed for deployment alongside PM 802F or PM 803F controller units.

Hardware Specifications

Control Bus Communication and System Processing Performance

• Manages backplane bus communication velocity and protocol translation across industrial control networks.
• Enforces firmware flash compatibility and real-time data packet processing routines during network communication.
• Maintains strict adherence to Profinet / EtherNet/IP deterministic networks where applicable system configuration rules apply.
• Executes I/O density scaling support to handle connected network nodes efficiently without data bottlenecking.

Ordering Information

• 1 x EI813F Ethernet Fieldbus Module unit
• 1 x Technical documentation sheet

Field Installation and Wiring Guidelines

• Mount the module securely onto the designated backplane slot within the AC800F rack chassis.
• Ensure proper ground bonding of the enclosure frame prior to applying the 24 V DC operating power supply.
• Connect shielded 10BaseT Ethernet cabling, maintaining strict separation from high-voltage power distribution lines.
• Verify LED status indicators post-installation to confirm active link status and power rail stability.

Frequently Asked Questions

• Q: What is the primary function of the EI813F module?

  A: It serves as an Ethernet fieldbus module providing 10BaseT network connectivity for AC800F controllers.

• Q: Which controller models are compatible with this Ethernet module?

  A: It is designed to be used together with PM 802F or PM 803F processor units.

• Q: What is the maximum data transmission rate supported?

  A: The module supports a data transfer rate of 10 Mbps over 10BaseT physical media.

• Q: What power supply voltage is required for operation?

  A: The unit operates on a nominal 24 V DC power supply with a current draw of 100 mA or less.

• Q: Is hot-swapping supported for this fieldbus module?

  A: Power must be removed from the rack before inserting or extracting the hardware to prevent electrical damage.

• Q: What is the isolation voltage rating for the module's circuitry?

  A: The unit provides an isolation rating of 1500 V DC.

• Q: What is the operating temperature range limit?

  A: It is engineered to function within ambient temperatures from -20 deg C to +70 deg C.

• Q: How are communication errors monitored during runtime?

  A: Internal diagnostic registers track packet integrity and signal status, reflecting states via front-panel LEDs.