The Bently Nevada 330103-00-06-10-02-CN, also cataloged as the 3300 XL 8 mm Proximity Probe, operates as a dedicated eddy-current displacement sensing element for conversion of shaft radial motion into electrical signal variation within the 3300 XL transducer chain. The probe generates a high-frequency field interaction signal proportional to target surface gap variation.

Suffix / Configuration Breakdown

• 330103: 3300 XL 8 mm probe platform
• 00: M10 x 1 thread configuration, no armor
• 06: Case length configuration 60 mm minimum
• 10: 1.0 m system cable length
• 02-CN: Miniature coaxial ClickLoc connector standard cable variant

Hardware Specifications

Eddy-Current Probe Scaling and Signal Transfer Characteristics (Bently Nevada TSI Behavior)

The 3300 XL 8 mm probe operates on eddy-current field interaction between the probe tip and conductive rotor surface. Displacement variation modifies coil impedance, which is interpreted by the proximitor driver as a calibrated voltage output proportional to shaft position. The probe scaling interface is designed for stable linear response across the defined case length (minimum 60 mm) and mounting geometry. Signal integrity depends on controlled cable impedance, connector continuity via ClickLoc interface, and suppression of electromagnetic cross-talk in multi-probe installations.

Frequently Asked Questions

Q: What is the function of the 330103 probe in the 3300 XL system?
A: It converts mechanical shaft displacement into an eddy-current based electrical signal for proximitor processing.

Q: Can the probe operate with extended cable lengths beyond 1.0 m?
A: This configuration is designed for a 1.0 m system length; extensions require compatible 3300 XL extension assemblies.

Q: Does the probe require external power supply?
A: No. The probe is passive and operates in conjunction with a proximitor driver module.

Q: What is the significance of M10 x 1 threading?
A: It defines the mechanical mounting interface for rigid probe installation into machine casing.

Field Installation Guidelines

• Maintain perpendicular alignment between probe tip and target surface
• Ensure minimum 60 mm case length compliance for stable mounting geometry
• Do not exceed specified thread engagement depth (standard industrial practice ~5 full threads)
• Route coaxial cable away from high-voltage switching conductors
• Ensure ClickLoc connector fully locked to prevent signal discontinuity
• Avoid mechanical stress on probe cable near mounting point

Ordering Info

• 1 x Bently Nevada 330103-00-06-10-02-CN 8 mm Proximity Probe
• Factory-terminated coaxial ClickLoc cable assembly
• M10 x 1 threaded probe body
• Standard 3300 XL compatibility configuration
• No calibration accessories included unless specified

Delivery Information

Delivery time: 3-5 days after payment confirmation or 2-7 days depending on carrier routing. Shipment via DHL / FedEx / UPS with anti-static industrial packaging, shock-protected tubing reinforcement, and sealed moisture-resistant protection for precision instrumentation.