Configured for dynamic sensor signal digitization in the Bently Nevada ORBIT 60 Series platform, the Bently Nevada 60R/INP01-02-0 (60R/INP01-02-0 PAV Prox Accel Vel Module) provides direct acquisition of proximity, acceleration, and velocity measurement signals.

Model Configuration Details

The 60R/INP01-02-0 is an ORBIT 60 Series Dynamic Input Module configured for Prox/Accel/Vel signal measurement. The module supports four-channel dynamic inputs and provides sensor power, signal digitization, and high-speed data processing functions.

The configuration includes Multi hazardous area certification support (CSA, ATEX, IECEx), no SIL rating, and compatibility with proximity, acceleration, and velocity transducers.

Hardware Specifications

Dynamic Signal Processing and Rotor Monitoring

The 60R/INP01-02-0 digitizes dynamic sensor signals at a 102.4 kHz sampling rate to capture vibration waveform content from connected transducers. The module provides sensor power for supported measurement devices and transfers processed data through the ORBIT 60 system architecture.

The module supports eddy-current proximity measurement interfaces where probe scaling and gap voltage validation are required for accurate shaft displacement monitoring. Correct sensor configuration ensures appropriate signal amplitude interpretation and measurement accuracy.

Speed Reference and Signal Synchronization

The ORBIT 60 Dynamic Input Module supports speed and Keyphasor signal configurations for synchronous machinery measurements. Primary and backup speed source functions can be configured for applications requiring speed reference continuity.

When backup speed operation is enabled, the module can transition measurement reference functions from a primary speed input to a backup channel. Phase timing compensation can be configured to maintain measurement alignment during speed source changes.

Ordering Information

• 1 x Bently Nevada 60R/INP01-02-0 PAV Prox Accel Vel Module
• 1 x ORBIT 60 Series Dynamic Input Module assembly
• 1 x Standard module hardware configuration

Field Installation Guidelines

Module Installation

• Install the module according to ORBIT 60 rack and system configuration requirements.
• Verify hazardous area certification requirements before installation.
• Confirm connected transducer types match the configured input channels.
• Check module power requirements before system startup.

Sensor Wiring

• Use appropriate shielded cables for dynamic vibration signal connections.
• Route sensor wiring away from high-current power cables.
• Verify connector seating before commissioning.
• Maintain correct grounding practices for vibration monitoring circuits.

Frequently Asked Questions

• What signals can the 60R/INP01-02-0 measure?

  The module supports proximity, acceleration, and velocity dynamic input signals through ORBIT 60 Series monitoring systems.

• How many input channels are provided?

  The Dynamic Input Module provides four dynamic input channels for connected machinery monitoring sensors.

• What is the sampling rate of this module?

  The module digitizes dynamic input signals at a sampling rate of 102.4 kHz.

• Does this module support Keyphasor signals?

  Yes. The module can be configured for speed and Keyphasor signal applications.

• What hazardous area certifications are available?

  This configuration supports CSA, ATEX, and IECEx hazardous area certification options.

• Does this module provide SIL certification?

  The specified 60R/INP01-02-0 configuration does not include a SIL rating.

• What is the purpose of backup speed source support?

  Backup speed source support provides an alternate speed reference for synchronous measurements if the primary source becomes invalid.

• What installation practice is recommended for dynamic input wiring?

  Shielded wiring, proper grounding, and separation from interference sources should be maintained for signal quality.