The Bently Nevada 350610-00-05, also cataloged as the 350610-00-05 Acceleration Interface Module, operates as a dedicated hardware component for conditioning acceleration transducer signals within the 3500 Machinery Protection System network.

Suffix Breakdown And Model Matrix

• Base Model Number: 350610
• Option Configuration: -00-05
• Module Class: Acceleration Interface Module (AIM)
• Compatible System: Bently Nevada 3500 Series Rack Monitors

Hardware Specifications

Rotor Dynamics And Signal Conditioning Architecture

The unit functions as an interface bridge between remote acceleration sensors and 3500 rack monitors such as the 3500/42M Proximitor Seismic Monitor. It incorporates onboard charge amplifier conversion circuitry to process raw piezoelectric accelerometer inputs into standardized voltage representations. The module executes cross-talk suppression and maintains high-integrity signal scaling to preserve dynamic rotor vibration data across extended cable runs, preventing phase distortion or amplitude attenuation prior to downstream rack acquisition.

Ordering Info And Package Contents

• 1 x 350610-00-05 Acceleration Interface Module hardware unit
• Note: Accessories, manuals, interconnect cables, and calibration software are excluded unless explicitly specified in the primary stock description.

Field Installation Guidelines

• Front Slot Configuration: Install the corresponding 3500/61 or compatible monitor module into any full-height front slot of the 3500 rack.
• Rear Slot Configuration: Mount the 350610-00-05 I/O module directly into the rear position aligned behind the front monitor module.
• Cabinet Clearance: Account for internal barrier module physical depths (approx. 163.1 mm) compared to standard modules (99.1 mm), requiring a minimum 600 mm cabinet depth for proper wiring clearance.
• Shielding And Grounding: Terminate signal cable shields to the designated chassis ground studs on the rear panel to minimize electromagnetic interference.

Frequently Asked Questions

• Q: What is the primary function of the 350610-00-05 module?

  A: It conditions and converts raw signals from acceleration transducers to interface with 3500 series rack monitors.

• Q: Is this module compatible with standard 400 mm enclosures?

  A: No, due to internal barrier depth characteristics, a 600 mm cabinet is typically required for proper physical clearance.

• Q: What power supply voltage does the unit require?

  A: It operates on a standard 24 VDC power supply distributed via the rack backplane or associated terminal assemblies.

• Q: Does the module support dual output signals?

  A: Yes, it delivers dual signal output capabilities covering both acceleration and velocity parameters.

• Q: What operating temperature range is supported?

  A: The module functions within an operating temperature range of -20 deg C to +70 deg C.

• Q: Which rack monitor does this I/O module typically pair with?

  A: It typically interfaces with monitors such as the 3500/42M Proximitor Seismic Monitor.

• Q: Are calibration certificates or software included with shipment?

  A: No, standard delivery includes only the hardware unit unless separate documentation packages are requested.

• Q: What is the weight of the hardware component?

  A: The unit weighs approximately 0.16 kg.