Product Overview

The Bently Nevada 330907-05-30-05-02-00 is a specialized 5 mm Proximity Probe designed for the 3300 NSv (Near-field) Transducer System. Unlike standard 8 mm probes, the NSv series is specifically engineered for applications involving small-diameter shafts or restricted mounting spaces where high-frequency, non-contact measurement is mandatory. This probe provides the high-fidelity signal data required to monitor radial vibration and axial position, making it a critical component for the protection of small industrial gearboxes, high-speed machine tools, and intricate turbomachinery components.

As a dedicated 330907-05-30-05-02-00 supplier, Maxwell PLC offers only genuine Bently Nevada parts. We understand that in the specialized domain of near-field vibration monitoring, sensitivity and linearity are paramount. When you buy 330907-05-30-05-02-00 probes from our inventory, you receive hardware verified to meet original factory calibration standards. Our commitment to quality ensures your monitoring loop maintains its integrity, preventing downtime and protecting your assets from unforeseen mechanical failure.

Key Features

• Small Diameter Optimization: The 5 mm tip design provides superior resolution for small shafts where 8 mm probes might exceed the target surface area.

• NSv Technology: Specifically optimized for near-field performance, reducing the required linear range while maintaining high signal-to-noise ratios.

• Extreme Thermal Stability: Rated for operation in environments from -35°C to +177°C, ensuring reliable performance in hot engine rooms or process areas.

• FluidLoc® Seal Technology: Engineered with proprietary sealing that prevents process fluid migration through the probe casing, enhancing long-term operational life.

• Ruggedized Construction: Built with stainless steel casing and a high-strength connector system to withstand continuous vibration and environmental hazards.

Technical Specifications

Model Configuration Explanation

The 330907-05-30-05-02-00 part number is an engineering descriptor for your specific application:

• 330907: The series identifier for the 3300 NSv 5mm proximity probe.

• 05: Threading and case diameter configuration.

• 30: Unthreaded length specification.

• 05: Total case length, calibrated for specific mounting depth requirements.

• 02: Connector interface (NSv series miniature coaxial).

• 00: Agency approval classification (Standard).

Typical Applications

• Small Turbochargers and Blowers: Providing accurate vibration data on limited surface areas.

• Machine Tool Spindles: Monitoring high-frequency displacement in precise manufacturing equipment.

• High-Speed Gearboxes: Detecting gear meshing frequencies and shaft runout in compact transmissions.

• Laboratory Testing: Providing high-resolution displacement data for R&D on small-scale rotating equipment.

• Precision Pumps: Used in applications where target geometry is too small for standard 8 mm probes.

System Compatibility

The 330907-05-30-05-02-00 must be used exclusively with a Bently Nevada 3300 NSv Proximitor sensor and its matching extension cable. The system is impedance-matched; substituting components from the 3300 XL (8 mm) system will cause significant measurement errors and calibration drift. Always verify your Proximitor part number and system length before installation.

Installation Guidelines

1. Mounting: Use a rigid, properly tapped mounting bracket. Because of the small 5 mm tip, ensure the probe is precisely centered on the target to avoid edge effects.

2. Gap Setting: Use a high-precision feeler gauge. Set the gap to the recommended voltage (typically -10 VDC nominal center).

3. Cable Routing: Use shielded conduit. Due to the high-frequency nature of NSv signals, ensure no sharp bends occur in the coaxial cable.

4. Maintenance: Regularly check for target surface wear or oxidation, as small diameter targets are more sensitive to surface degradation than larger targets.

Product Advantages

When you source genuine Bently Nevada parts, you are ensuring that your machine protection logic relies on accurate, factory-tested data. Our 330907-05-30-05-02-00 in stock inventory allows for rapid replacement in critical maintenance scenarios. Avoid the pitfalls of generic sensors—our authentic parts ensure the highest signal-to-noise ratio, providing you with a reliable, long-lasting monitoring solution.

Ordering Information

We are your reliable 330907-05-30-05-02-00 supplier. To receive a current 330907-05-30-05-02-00 price quote, please contact our sales office. We support global industrial facilities and provide full documentation for all industrial automation spare parts we deliver.

Logistics and Shipping

Precision instrumentation requires precision handling. Every 330907 probe is shipped in professional-grade anti-static industrial packaging. This ensures that the sensitive 5 mm probe tip and internal circuitry remain shielded from electrostatic discharge and mechanical impact during global transit, so your equipment arrives ready for immediate site integration.

Why Choose Maxwell PLC

With 30 years of industry experience, Maxwell PLC is a trusted name in automation maintenance and supply. We offer more than just components; we provide technical reliability. We have direct lines of communication with leading manufacturers, ensuring 100% authenticity. Before any part leaves our warehouse, it undergoes a thorough inspection and performance check. We provide documentation and test reports upon request, allowing your site engineers to verify the hardware's condition before the machine is ever restarted.

Frequently Asked Questions

• Is this a 100% genuine Bently Nevada part?

  Yes, we supply only original equipment, ensuring full manufacturer compatibility and support.

• Is the 330907-05-30-05-02-00 currently in stock?

  Yes, we maintain this model in our active inventory for immediate dispatch.

• Can I use this with an 8 mm XL probe system?

  No, the 3300 NSv system is electrically different and requires matching NSv components.

• How do I ensure the probe is compatible with my shaft?

  The 5 mm NSv probe is intended for shafts where the target area is too small for standard 8 mm probes.

• Do you provide global shipping?

  Yes, we ship to industrial plants and power facilities worldwide.

• Is technical assistance available for installation?

  Our experienced automation engineers are available to support your installation or troubleshooting process.

• Why is the 3300 NSv different from the 3300 XL?

  The NSv is specifically engineered for high-frequency measurements in smaller spatial envelopes.

• Can I get a volume discount?

  Yes, contact our sales department for pricing on bulk orders for plant maintenance turnarounds.

• What documentation is provided with the probe?

  We include all necessary certification and origin documents with your order.

• Is there a warranty on this part?

  Yes, we stand behind the quality of our genuine parts with a standard industrial warranty.

Related Models

• Bently Nevada 330905-05-10-10-12-CN

• Bently Nevada 330901-00-00-05-02-00

• Bently Nevada 330101-00-08-10-02-00

• Bently Nevada 3500/42M (176449-01)

• Bently Nevada 330130-085-00-00

• Bently Nevada 330880-00-20-038-00-02