Configured for non-contact shaft vibration and position measurement in 3300 XL proximity transducer systems, the Bently Nevada 330106-05-30-10-02-05 (330106 Reverse Mount Probe) provides direct electrical execution. The probe generates a voltage output proportional to the distance between the probe tip and a conductive target surface, supporting both static position and dynamic vibration measurements within the 3300 XL 8 mm transducer platform.

Probe Configuration

Technical Specifications

Gap Voltage Validation

The 3300 XL 8 mm transducer system produces an output voltage directly proportional to the distance between the probe tip and the observed conductive target. During commissioning and maintenance activities, gap voltage verification is commonly performed to confirm operation within the specified linear measurement range. Typical installation practice includes verification of probe positioning and signal response before machinery startup.

The 3300 XL architecture supports complete interchangeability between compatible probes, extension cables, and Proximitor sensors. This design removes the requirement for individual component matching and allows replacement of field components without bench calibration between transducer elements.

The probe incorporates the TipLoc molding process to strengthen the mechanical bond between the probe tip and probe body. The CableLoc retention design provides a specified pull strength of 330 N (75 lbf) between the probe cable assembly and probe tip.

Technical Questions

Q: Does the probe measure both static and dynamic shaft conditions?
A: Yes. The transducer system supports static position measurements and dynamic vibration measurements using the same sensing principle.

Q: Is the 330106 probe interchangeable with other 3300 XL 8 mm probes?
A: Yes. The 3300 XL system is designed to support interchangeability among compatible probes, extension cables, and Proximitor sensors.

Q: What is the primary difference between 330106 and 330105 probes?
A: The difference is mechanical mounting configuration. The 330106 uses M10 x 1 metric threads, while the 330105 uses 3/8-24 UNF imperial threads.

Q: Can this probe be used for Keyphasor and speed-related measurements?
A: The 3300 XL transducer family supports applications including vibration, position, Keyphasor reference, and speed measurement functions when used within compatible system configurations.

Q: Does the probe require special cable routing practices?
A: Yes. Signal cables should be routed separately from power conductors and high-current circuits to minimize electromagnetic interference.

Installation Practices

• Verify machine mounting threads are M10 x 1 before installation.

• Inspect the probe tip and connector assembly before mounting.

• Maintain adequate clearance between the probe face and rotating target during installation.

• Route transducer cables separately from motor feeders, VFD output wiring, and switching power circuits.

• Maintain cable shielding continuity according to plant grounding practices.

• Avoid excessive cable tension, twisting, or repeated flexing near connector terminations.

• Confirm probe gap voltage and transducer response after installation.

• Inspect ClickLoc connector engagement to ensure proper mechanical locking.

Package Contents

• 1 x Bently Nevada 330106-05-30-10-02-05 3300 XL 8 mm Reverse Mount Probe

• Factory-installed Miniature ClickLoc coaxial connector

• Manufacturer identification labeling

Optional compatible accessories:

• 3300 XL Extension Cables

• 3300 XL Proximitor Sensors

• Reverse Mount Hardware Components

• Probe Protection Accessories

Logistics Information

• Delivery time: 2-7 days when payment finish

• Shipment available via DHL, FedEx, and UPS

• Anti-static industrial packaging used for shipment preparation

• Connector and probe-tip protection applied during transportation

• Industrial-grade packaging with product traceability identification