Configured for industrial Ethernet data switching in Stratix Managed Switches networks, the Allen-Bradley 1783-MX08T (1783-MX08T Ethernet Managed Switch Module) provides direct physical network connectivity through eight 10/100 Base-T copper Ethernet ports for EtherNet/IP communication infrastructures.

Model Identification

The 1783-MX08T is an Allen-Bradley Stratix Managed Switches component. The catalog number identifies the managed Ethernet switch hardware with an 8-port copper Ethernet interface configuration. No additional suffix breakdown is provided in the supplied documentation.

Hardware Specifications

EtherNet/IP Network Integration

The Allen-Bradley 1783-MX08T is designed for industrial Ethernet infrastructure within Rockwell Automation control systems. The switch provides physical Layer 2 connectivity between controllers, I/O devices, HMIs, and other Ethernet-enabled automation components.

EtherNet/IP deterministic networks depend on proper switch configuration, network topology planning, and firmware compatibility. The Stratix platform supports industrial control architectures where managed switching functions are required for traffic handling and diagnostics.

The 1783-MX08T installation should maintain appropriate separation between Ethernet communication cables and high-voltage power wiring to reduce electrical interference.

Ordering Information

• 1 x Allen-Bradley 1783-MX08T Stratix Managed Switches Ethernet Switch Module
• 1 x Standard manufacturer hardware package
• 1 x Installation documentation package, if supplied with the original configuration

Field Installation Guidelines

Mounting and Wiring

• Install the switch inside an appropriate industrial enclosure when required by the application environment.
• Verify ambient temperature and humidity conditions before installation.
• Use industrial-rated Ethernet cables compatible with 10/100 Base-T communication requirements.
• Maintain separation between Ethernet cables and power conductors to minimize electromagnetic interference.
• Connect cable shields according to the plant grounding standard.

Network Configuration

• Verify Ethernet addressing parameters before connecting the device to an active network.
• Confirm switch firmware compatibility with the connected automation platform.
• Avoid unmanaged network loops that may affect communication performance.
• Inspect Ethernet connectors for contamination or mechanical damage before commissioning.

Frequently Asked Questions

• What network interface does the 1783-MX08T provide?

  The 1783-MX08T provides eight 10/100 Base-T copper Ethernet ports for industrial Ethernet communication connections.

• Is the 1783-MX08T part of the Stratix product family?

  Yes. The module belongs to the Allen-Bradley Stratix Managed Switches series designed for industrial Ethernet applications.

• What is the operating temperature range?

  The specified operating temperature range is -40 to 60 deg C for the 1783-MX08T hardware.

• Can the switch be installed in open environments?

  The enclosure type is listed as open type. Installation should follow enclosure and environmental requirements for the application.

• What humidity range is supported by this module?

  The specified relative humidity range is 5% to 95% according to available product documentation.

• Does the module support copper Ethernet connections?

  Yes. The hardware includes eight copper Ethernet ports using 10/100 Base-T interfaces.

• Is power consumption specified for this model?

  Power consumption data is not provided in the available technical information and should be verified from manufacturer documentation.

• What installation practice is recommended for Ethernet wiring?

  Ethernet cables should be routed separately from high-voltage wiring and properly grounded according to industrial standards.