The Allen-Bradley 1715-AENTR, also cataloged as the 1715-AENTR EtherNet/IP Adapter Module, operates as a dedicated hardware component for network communication and packet routing within distributed control networks.

Nomenclature & Part Breakdown

• Product Base: 1715
• Sub-Assembly Line: Redundant I/O Module
• Communication Protocol: EtherNet/IP Adapter
• Spare Model Reference: 1715AENTR

Hardware Specifications

Deterministic Network & Backplane Integration

Configured for deterministic communications across plant networks, the module handles backplane bus communication velocity and I/O density scaling efficiently. It facilitates high-speed data exchange via EtherNet/IP deterministic networks, maintaining packet integrity and supporting firmware flash compatibility across connected nodes.

Package Contents & Ordering Details

• 1 x 1715-AENTR Communication Adapter Module
• 1 x Terminal block set (12 AWG wire size capacity)
• 1 x Hardware installation bulletin reference

Physical Installation Guidelines

• Enclosure Mounting: Secure the adapter module base onto a grounded panel or standard chassis structure, ensuring solid electrical continuity.
• Wiring Clearance: Utilize 12 AWG conductors for power and communication line termination while maintaining minimum bend radii.
• Grounding Standards: Connect the protective earth shielding directly to the designated enclosure grounding bus bar to eliminate electromagnetic interference.
• Insertion Protocol: Align module guide pins carefully with backplane slots prior to final latch engagement to prevent pin distortion.

Frequently Asked Questions

• What is the primary function of this communication module?
• The unit serves as an EtherNet/IP adapter managing data routing for up to 24 connected I/O modules per adapter pair.
• What is the maximum power dissipation rating?
• The module exhibits a continuous power dissipation load of 8 W under standard operation.
• What maximum wire size is supported by the terminal connections?
• The integrated terminals accommodate copper conductors up to 12 AWG in size.
• Is hot-swapping supported during active network operations?
• Yes, the modular design permits removal and insertion under power when implemented within qualified redundant configurations.
• What is the specified weight of the hardware?
• The unit weighs precisely 0.65 kg.
• What are the estimated shipping dimensions?
• The packaged dimensions measure 25.5 cm x 17.5 cm x 7.5 cm.
• Where is this module manufactured?
• The country of origin is designated as the USA.
• What alternative spare model number designates this item?
• The designated spare model code is 1715AENTR.