Configured for power conversion and electrical signal isolation in industrial control networks, the Allen-Bradley 1606-XLP100E (1606-XLP100E Switched Mode Power Supply) provides direct physical/electrical execution.

Nomenclature & Component Breakdown

• Model Base: 1606
• Product Series: XLP
• Power Rating: 100 W
• Input Voltage Range: 200 V AC to 240 V AC
• Output Current: 2.1 A

Hardware Specifications

Deterministic Network & Backplane Integration

Integrated across Profinet and EtherNet/IP deterministic networks, this power module sustains backplane bus communication velocity and I/O density scaling. The internal topology manages current draw limitations and maintains stable voltage outputs during dynamic load spikes, safeguarding connected controller nodes from transient voltage fluctuations while ensuring firmware flash compatibility across network nodes.

Package Contents & Ordering Details

• 1 x 1606-XLP100E Switched Mode Power Supply unit
• 1 x Screw and spring clamp terminal connector set
• 1 x Technical installation instruction sheet

Physical Installation Guidelines

• Enclosure Clearance: Maintain adequate vertical spacing above and below the compact housing to ensure minimal heat generation and optimal thermal convection.
• DIN-Rail Mounting: Secure the module firmly onto standard industrial mounting profiles, verifying mechanical locking engagement.
• Wiring Termination: Insert stripped copper conductors securely into the screw or spring clamp terminals to prevent loose connections under vibration.
• Grounding Compliance: Connect the protective earth terminal directly to the internal cabinet ground bus using low-impedance cabling.

Frequently Asked Questions

• What is the nominal input voltage requirement for this unit?
• The power supply accepts an input voltage range spanning from 200 V AC to 240 V AC.
• What is the total continuous output power capacity?
• The unit delivers a continuous output power level of 100 W under standard load conditions.
• What is the rated output current of the power supply?
• The module provides a regulated output current of 2.1 A.
• Does the hardware feature diagnostic signal output capabilities?
• Yes, it includes an integrated DC-OK signal output to monitor operational status and voltage health.
• What type of connection terminals are utilized on the device?
• The terminal blocks support flexible wiring options using screw and spring clamp connection designs.
• Is the output voltage fixed or adjustable?
• The output voltage is fully adjustable to match specific load requirements within its operating range.
• What is the physical weight of the hardware?
• The unit weighs precisely 0.4 kg.
• What are the estimated shipping dimensions?
• The packaged dimensions measure 7.0 cm x 7.6 cm x 10.8 cm.