Configured for high-temperature vibration transducer signal routing in machinery surveillance architecture, the Bently Nevada 130539-35, also cataloged as the 130539-35 Accelerometer Extension Cables, ensures precise electrical continuity between casing-mounted sensors and monitor racks.

Catalog Designation and Suffix Architecture

• Primary Part Number: 130539-35

• Conductor Count: 3 conductors with overall shield

• Wire Gauge: 18 AWG (1.0 mm2)

• Interface Configuration: 3-socket plug with fluorosilicone elastomer boot at one termination, terminal lugs at the opposing end

Hardware Specifications

Transducer Signal Dynamics and Cross-Talk Suppression

The assembly preserves low-level acceleration signals by maintaining rigorous shielding properties across extended runs. It prevents signal degradation associated with rotor dynamics fluctuations and electromagnetic interference. Signal fidelity remains optimal for casing vibration analysis, supporting gap voltage validation and cross-talk suppression in industrial environments.

Bill of Materials and Delivery Package

• 1 x Bently Nevada 130539-35 3-conductor shielded cable assembly

• 1 x Integrated fluorosilicone elastomer boot (factory fitted on socket plug)

• 1 x Manufacturer quality compliance tag

Physical Installation and Routing Specifications

• Bending Constraints: Secure the cable with appropriate radius supports to prevent micro-fractures in the internal conductors during dynamic machine operation.

• Shield Termination: Ground the shield drain wire exclusively at the monitoring system cabinet to prevent ground loop currents from corrupting transducer readings.

• Thermal Separation: Route the cable away from direct high-temperature steam lines or exhaust zones that exceed the rated 200 deg C threshold.

Frequently Asked Questions

• What is the cross-sectional area of the internal conductors?

  Each of the three conductors features an 18 AWG size, equivalent to 1.0 mm2.

• What are the length boundaries permitted for this cable type?

  Lengths span from a minimum of 2.0 ft (0.6 m) up to a maximum of 99 ft (30 m).

• What material is utilized for the connector boot?

  The boot is molded from fluorosilicone elastomer to resist oils and high ambient temperatures.

• What is the maximum operating temperature limit?

  The cable functions reliably in environments up to +200 deg C.

• What is the maximum capacitance per meter?

  Mutual capacitance is constrained below 100 pF/m to minimize signal attenuation.

• What is the individual net weight of the unit?

  The physical weight totals 0.02 kg without outer transport cartons.

• What voltage threshold does the cable support?

  It is rated for operational circuits up to 300 V AC/DC.

• Where is the manufacturing facility located?

  Production occurs in the United States, with shipping managed from Xiamen, China.