The Bently Nevada 106765-20, also cataloged as the 106765 Interconnect Cable, operates as a dedicated hardware component for vibration signal transmission between 330525 series transducers and monitoring interfaces within Bently Nevada mechanical monitoring systems.

Model Configuration Overview

The 106765-20 is a 20 ft (6.1 m) multi-conductor shielded interconnect cable designed for Bently Nevada 330525 series applications. The cable assembly uses six twisted pairs with copper conductors and provides controlled electrical characteristics for vibration monitoring signal paths.

Hardware Specifications

Signal Transmission and TSI Characteristics

The 106765-20 cable maintains the electrical connection between vibration transducers and Bently Nevada monitoring hardware. The shielded multi-conductor construction supports signal separation and reduces external electrical interference within mechanical monitoring circuits.

In Bently Nevada TSI systems, cable characteristics influence measurement chain performance. Unlike eddy-current proximity probe systems that require gap voltage validation and probe scaling adjustment, this interconnect cable functions as a passive signal transmission component for connected vibration sensors.

For rotor dynamics monitoring, correct cable installation helps preserve vibration waveform integrity. The 100% foil and 85% braid shielding structure provides electromagnetic noise reduction when installed according to grounding and routing requirements.

Ordering Information

• 1 x Bently Nevada 106765-20 Interconnect Cable
• Cable length: 20 ft (6.1 m)
• Multi-conductor shielded cable assembly
• PVC jacket cable construction
• Compatible with Bently Nevada 330525 series monitoring applications

Field Installation Guidelines

• Route the cable separately from high-voltage and high-current electrical wiring.
• Maintain proper shielding continuity throughout the installation.
• Avoid excessive bending and mechanical stress near cable termination points.
• Keep cable routing within the specified minimum bend requirements.
• Verify conductor continuity and insulation condition before connection.
• Connect cable shielding according to the monitoring system grounding practice.

Frequently Asked Questions

• What is the main function of the 106765-20 cable?

The cable provides signal transmission between compatible Bently Nevada vibration transducers and monitoring interfaces.

• Which Bently Nevada series uses this cable?

The 106765-20 is specified for 330525 series interconnect applications.

• What type of conductors are included in this cable?

The cable contains six twisted pairs with 12 AWG conductors.

• What shielding structure does the cable use?

The cable uses 100% foil shielding combined with 85% braid coverage.

• What is the operating temperature range?

The specified operating temperature range is -40 deg C to +105 deg C.

• Does the 106765-20 cable require external power?

No. The cable is a passive interconnect component and does not consume electrical power.

• What affects vibration signal quality during installation?

Cable routing, shielding connection, grounding condition, and mechanical protection affect signal quality.

• Can the cable length be customized beyond the standard model?

The specified product supports cable lengths within the provided range of 1 m to 25 m.