The Bently Nevada 102045-040-00, also cataloged as the 102045 Extension Cable, operates as a dedicated hardware component for proximity probe signal extension within Bently Nevada 3300 XL transducer systems.

Model Configuration Overview

The 102045-040-00 configuration provides a 40 ft (12.19 m) extension cable assembly designed for Bently Nevada 3300 XL proximity transducer signal paths. The cable uses copper conductors with PVC insulation and supports 250 V AC rated electrical operation.

Hardware Specifications

Proximity Signal Transmission Characteristics

The 102045-040-00 extension cable forms part of the Bently Nevada proximity measurement chain, connecting compatible proximity probes with monitoring interfaces. The cable maintains signal continuity between the eddy-current probe assembly and monitoring electronics.

For Bently Nevada TSI applications, correct cable length and electrical characteristics are required for accurate eddy-current probe scaling and gap voltage validation. The extension cable contributes to maintaining the probe system electrical impedance required for shaft displacement measurement.

Proper cable routing also supports rotor dynamics monitoring by reducing signal disturbance caused by electromagnetic interference and mechanical cable movement. Shielding and grounding practices should follow the requirements of the connected monitoring system.

Ordering Information

• 1 x Bently Nevada 102045-040-00 Extension Cable
• Cable length: 40 ft (12.19 m)
• Copper conductor cable assembly
• PVC insulated cable construction for proximity transducer applications

Field Installation Guidelines

• Install the extension cable according to the specified proximity probe system wiring requirements.
• Avoid routing parallel to high-voltage power cables to reduce electromagnetic interference.
• Maintain proper cable support to prevent mechanical stress on connectors.
• Avoid sharp bending beyond the recommended installation practice.
• Verify cable continuity before connecting to the monitoring channel.
• Confirm probe, extension cable, and sensor interface compatibility before operation.

Frequently Asked Questions

• What system is the 102045-040-00 cable used with?

The cable is designed for Bently Nevada 3300 XL proximity transducer signal extension applications.

• What is the cable length of this model?

The 102045-040-00 extension cable has a length of 40 ft (12.19 m).

• What conductor material is used in this cable?

The cable uses copper conductors for electrical signal transmission.

• What voltage rating is specified for this cable?

The cable is rated for 250 V AC operation according to the provided specification.

• What temperature range can the cable withstand?

The operating temperature range is -40 deg C to 100 deg C (-40 deg F to 212 deg F).

• Is this cable compatible with eddy-current proximity probe systems?

Yes. It is specified as an extension cable for Bently Nevada proximity transducer systems.

• Does the extension cable require external power?

No. The cable is a passive connection component and does not consume electrical power.

• What installation factor affects proximity signal quality?

Cable routing, shielding condition, grounding method, and connector integrity affect signal transmission quality.