Hardware & Electrical Specifications

Deterministic Network Operations & Data Synchronization

The DRT2-ID16 processes discrete digital input states without introducing backplane bus communication velocity bottlenecks. Internal logic manages I/O density scaling efficiently while delivering cyclic data updates across DeviceNet scan loops. Embedded firmware flash compatibility maintains signal timing alignment and diagnostic messaging synchronization.

Scope of Delivery

• 1 x Omron DRT2-ID16 Transistor Input Terminal
• 1 x DeviceNet Open Cable Connector
• 1 x Installation Sheet

Enclosure Mounting & Field Wiring Directives

DIN Rail Mounting Standard

• Mount the terminal housing onto a standard 35-mm DIN rail inside a protective control enclosure.
• Install end stops on both sides to prevent lateral movement along the rail under mechanical vibration.

M3 Screw Terminal Wiring

• Wire 24 VDC NPN input devices to the M3 screw terminal block using appropriate wire ferrules.
• Tighten M3 terminal screws securely to maintain continuous electrical contact.

Frequently Asked Questions

• What input circuit logic polarity is supported by the DRT2-ID16?

  The module features 16 discrete input points arranged in an NPN (plus common) circuit configuration.

• What physical terminal type is provided for field signal wiring?

  Field connections are made via M3 screw terminals integrated directly into the module front panel.

• How is internal circuit power supplied to the input terminal?

  Operational power for internal communications is drawn directly from the DeviceNet network connection.

• What auxiliary supply voltage is required for the input field devices?

  The connected field input circuits require a rated external I/O power supply of 24 VDC.

• What operating temperature range must be maintained for the module?

  The terminal operates within ambient industrial environments from -10 deg C up to 55 deg C.

• How does the module handle real-time network data transmission?

  Internal logic processes input state transitions rapidly to maintain high deterministic bus velocity across DeviceNet.

• What storage conditions are required for spare units?

  Unpowered units must be stored in dry environments between -25 deg C and 65 deg C without moisture condensation.

• Can the DRT2-ID16 be mounted without special bracket accessories?

  Yes, the physical enclosure includes an integral rear latching mechanism for direct 35-mm DIN rail mounting.