The Bently Nevada 3500/15-02-00-00, also cataloged as the 3500/15 Power Supply Module, operates as a half-height hardware component for converting and distributing system operating power within Bently Nevada 3500 machinery protection racks. Configured for AC input power requirements, this module supplies regulated operating voltages to all installed rack monitors and interface modules.

Model Configuration

The 3500/15-02-00-00 represents a specific cataloged ordering configuration of the Bently Nevada 3500/15 Power Supply series. The base model number 3500/15 designates a modular AC/DC power supply engineered for installation in the lower left section of a standard 3500 rack. The suffix option codes designate specific input voltage ranges and agency approval configurations established by the manufacturer.

Hardware Specifications

Power Distribution and System Integration

As a primary infrastructure module, the 3500/15 receives incoming alternating current line voltage and converts it into regulated low-voltage direct current rails required by the 3500 rack backplane. The module supports redundant power supply configurations when two units are installed in a single rack, permitting uninterrupted operation during module switchover or maintenance. Front-panel status indicators provide real-time diagnostic feedback regarding AC input status, DC output regulation, and power supply OK fault monitoring.

Installation and Electrical Integration

• Insert the power supply module into the dedicated lower-left slot of the 3500 rack enclosure, engaging the rear backplane connectors securely.
• Ensure all external AC input power sources are completely isolated and locked out before connecting field wiring to the rack input terminals.
• Connect AC line, neutral, and protective earth ground conductors strictly in accordance with terminal designations and local electrical codes.
• Verify proper torque on terminal fasteners to prevent loose connections and intermittent power delivery in industrial environments.
• Check front-panel LED indicators after energizing the rack to confirm normal DC rail regulation prior to system commissioning.

Frequently Asked Questions

• Q: What is the primary function of the Bently Nevada 3500/15-02-00-00 module? A: It serves as an AC input power supply module responsible for converting line voltage into regulated DC operating power for 3500 rack monitoring cards.
• Q: What input voltage range does this specific configuration accept? A: It accepts an AC input voltage range from 85 VAC to 132 VAC (rms) at frequencies between 47 Hz and 63 Hz.
• Q: Where is the power supply module mounted within the system? A: It installs directly into the designated lower-left power supply slots of a standard Bently Nevada 3500 machinery protection rack.
• Q: Does this module support redundant rack power configurations? A: Yes, the 3500 rack architecture supports dual 3500/15 modules operating in parallel for power supply redundancy.
• Q: What are the physical dimensions and weight of the module? A: The module measures approximately 120 mm x 245 mm x 255 mm with a net product weight of 1.5 kg.
• Q: What diagnostics are provided on the front panel? A: Front-panel LED indicators display operational status, including AC power status, OK status, and DC rail regulation.
• Q: What is the maximum power output capacity of the unit? A: The power supply delivers a maximum continuous output power rating of 316 W to rack backplane loads.
• Q: Is hot-swap replacement supported during operation? A: Yes, when configured with a redundant secondary power supply module, individual units can be replaced without interrupting system monitoring.