Configured for high-precision radial vibration and axial position measurement in specialized machinery protection environments, the Bently Nevada 330903-00-06-05-02-05, also cataloged as the 3300 NSv Proximity Probes 3300 NSv Proximity Probes, provides direct physical/electrical execution.

Catalog Nomenclature and Option Architecture

• Base Catalog Model: 330903 (3300 NSv Probe)
• Unthreaded Length Option: 00 (0 mm)
• Overall Case Length Option: 06 (60 mm)
• Total Length Option: 05 (0.5 meter / 20 in)
• Connector and Cable Option: 02 (Miniature coaxial ClickLoc connector standard cable)
• Agency Approval Option: 05 (Multiple Approvals)

Hardware Specifications Table

Rotor Dynamics and Signal Transmission Integrity

• Preserves accurate eddy-current probe scaling to guarantee linear displacement measurements across variable shaft rotational speeds and tight target areas.
• Facilitates precise gap voltage validation targeting standard -10 VDC baselines for machinery monitoring and protection systems.
• Incorporates structural cross-talk suppression mechanisms to maintain signal fidelity in dense multi-channel installations.
• Minimizes phase distortion to support complex rotor dynamics analysis and transient event capture in high-speed turbomachinery.

Ordering Information

• 1 x Bently Nevada 330903-00-06-05-02-05 Proximity Probe
• 1 x Multi-Approval Agency Certification Documentation Sheet

Installation and Routing Guidelines

• Mechanical Mounting Protocol
  • Thread the M8 x 1 probe securely into the designated machine mounting hole, ensuring proper thread engagement without exceeding torque limits.
  • Verify that the probe tip clearance and gap voltage align with baseline specifications before final locknut tightening.
• Electrical Connection and Grounding
  • Mated ClickLoc connectors must be fully engaged and hand-tightened to maintain environmental seal integrity and electrical continuity.
  • Route the coaxial cable away from high-power alternating current lines to prevent induced signal interference.

Frequently Asked Questions

• What is the thread specification for this proximity probe model?

  The probe features an M8 x 1 thread specification without armor.

• What is the minimum unthreaded length configured on this unit?

  The unthreaded length is 0 mm.

• What is the overall case length option for this part number?

  The overall case length is 60 mm.

• What is the total length of the attached cable?

  The total length option is 0.5 meter (20 in).

• What type of connector is utilized on the probe cable?

  It utilizes a miniature coaxial ClickLoc connector standard cable.

• What agency approvals are certified for this configuration?

  This model includes multiple hazardous area approvals corresponding to option code 05.

• What is the physical weight of the packaged unit?

  The unit weighs approximately 0.06 kg.

• What are the estimated shipping dimensions?

  The estimated shipping dimensions are 62 x 1 x 1 cm.