Configured for analog output termination within industrial control networks, the Allen-Bradley 1715-TASOF8 (1715-TASOF8 Termination Assembly) provides direct physical/electrical execution.

Nomenclature & Component Breakdown

• Model Base: 1715
• Component Type: Termination Assembly
• Channel Architecture: 8-Channel Simplex
• Functional Group: Analog Output
• System Series: Redundant I/O

Hardware Specifications

Deterministic Network & Backplane Integration

Integrated across Profinet and EtherNet/IP deterministic networks, this termination assembly sustains backplane bus communication velocity and I/O density scaling. The internal topology manages current draw limitations and maintains stable voltage outputs during dynamic load spikes, safeguarding connected controller nodes from transient voltage fluctuations while ensuring firmware flash compatibility across network nodes.

Package Contents & Ordering Details

• 1 x 1715-TASOF8 Termination Assembly unit
• 1 x Terminal block set with screw connection interface
• 1 x Installation instruction documentation

Physical Installation Guidelines

• Enclosure Clearance: Maintain adequate vertical spacing above and below the open-style housing to ensure proper thermal dissipation and environmental protection via conformal coating.
• DIN-Rail Mounting: Secure the assembly firmly onto standard 35 mm DIN rails or mounting panels, verifying mechanical locking engagement.
• Wiring Termination: Insert shielded copper conductors (22 to 16 AWG) rated for at least 85 deg C into the terminals, tightening screws to a maximum torque of 0.5 N-m using a 0.4 x 2.0 mm flathead screwdriver.
• Grounding Compliance: Connect the protective earth shielding directly to the designated cabinet ground bus using a grounding conductor with a minimum cross-sectional area of 3.31 mm squared.

Frequently Asked Questions

• What is the channel configuration of this termination assembly?
• The unit features an 8-channel simplex analog output architecture designed for redundant I/O systems.
• What is the maximum power dissipation rating?
• The module operates at a maximum power dissipation of 3.6 W with 0.64 W per field loop.
• What input voltage range does the assembly support?
• It accommodates operational voltage inputs ranging from 18 V DC to 32 V DC.
• What wire size and type are required for field connections?
• It utilizes single 0.33 to 1.5 mm squared (22 to 16 AWG) solid or stranded shielded copper wire rated for 85 deg C.
• Is hot-swapping supported during system operation?
• Yes, modules can be removed and replaced without system interruption in compatible redundant configurations.
• What terminal screw torque is specified during installation?
• Terminal screws must be torqued to exactly 0.5 N-m using a 0.4 x 2.0 mm flathead screwdriver to prevent thread damage.
• What is the specified isolation voltage limit?
• The hardware provides an electrical isolation voltage rating of 50 V.
• What is the physical weight of the hardware?
• The unit weighs approximately 0.1 kg (or 133 grams as specified in physical schematics).