{"product_id":"nrio02-abb-remote-i-o-module-network-version-90","title":"NRIO02 ABB Remote I\/O Module Network Version 90","description":"\u003cp\u003eThe \u003cstrong\u003eABB NRIO02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNRIO02\u003c\/strong\u003e Remote I\/O Module, operates as a dedicated hardware component for deterministic signal processing and fieldbus interface conversion within Network Version 90 DCS platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Variant Identification\u003c\/h3\u003e\n\u003cp\u003eThe NRIO02 module belongs to the Network Version 90 remote subsystem product family. The model designation NRIO02 specifies the primary remote I\/O interface board engineered to execute high-speed serial communication at 10 Mbps between local node controllers and remote field terminal blocks across galvanic isolation boundaries.\u003c\/p\u003e\n\u003ch3\u003eTechnical Performance Parameters\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNRIO02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e17.8 x 5.1 x 33.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e5-95% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e+5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Rate\u003c\/td\u003e\n\u003ctd\u003e10 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e1500 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network and Bus Architecture\u003c\/h3\u003e\n\u003cp\u003eEngineered for seamless integration into the backplane bus communication system, the NRIO02 supports high-speed deterministic data exchanges across Network Version 90 interfaces. The module maintains firmware flash compatibility with host processing units, ensuring real-time signal processing and I\/O density scaling while isolating core control circuits via a 1500 V AC galvanic barrier.\u003c\/p\u003e\n\u003ch3\u003eDelivery Scope\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ABB NRIO02 Remote I\/O Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Wiring Protocol\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect main rack power before inserting or removing the card to prevent backplane bus transients.\u003c\/li\u003e\n\u003cli\u003eVerify module guide alignment prior to seating edge connectors into the backplane rack.\u003c\/li\u003e\n\u003cli\u003eEnsure all serial communication lines maintain a minimum 100-mm clearance from high-voltage AC cables.\u003c\/li\u003e\n\u003cli\u003eConnect cabinet chassis ground directly to terminal grounding points to maintain 1500 V AC isolation integrity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering FAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the supply voltage required for the NRIO02 module?\u003c\/p\u003e\n\u003cp\u003eThe NRIO02 operates directly off a regulated +5 V DC backplane power supply bus.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the maximum data transmission speed of the network interface?\u003c\/p\u003e\n\u003cp\u003eThe remote I\/O interface communicates at a fixed data rate of 10 Mbps.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the NRIO02 support electrical isolation between field and system circuits?\u003c\/p\u003e\n\u003cp\u003eYes, the module incorporates internal isolation rated for up to 1500 V AC testing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat ambient temperature range is permissible during operation?\u003c\/p\u003e\n\u003cp\u003eThe module is specified to operate within an ambient temperature range of 0 to +60 deg C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the NRIO02 be hot-swapped during active system processing?\u003c\/p\u003e\n\u003cp\u003eHot-swapping requires pausing the local I\/O scan loop to prevent backplane bus communication faults.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is firmware compatibility maintained with host controllers?\u003c\/p\u003e\n\u003cp\u003eFirmware flash compatibility is negotiated automatically via the module backplane initialization routine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat ambient humidity limits must be maintained in the cabinet?\u003c\/p\u003e\n\u003cp\u003eOperating environment relative humidity must remain between 5% and 95%, non-condensing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat procedure prevents damage to the module edge contacts during installation?\u003c\/p\u003e\n\u003cp\u003eSlide the module smoothly along card guides and apply uniform pressure to the faceplate latches.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":46021112266925,"sku":"NRIO02","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/nrio02_2.jpg?v=1789278457","url":"https:\/\/www.maxwellplc.com\/ru\/products\/nrio02-abb-remote-i-o-module-network-version-90","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}