Product Overview

The GE Fanuc IC200ALG240 VersaMax Analog Input Module provides multi-channel analog signal acquisition for VersaMax PLC and remote I/O stations. It accepts either current or voltage signals and converts them into 16-bit digital values for the controller, supporting accurate measurement and stable process monitoring.

The module includes built-in fault detection and front-panel indication to assist troubleshooting in the field. Diagnostic reporting can identify common analog loop and signal conditions, improving maintenance efficiency in control panels.

Measurement and Isolation Specifications

• Model Number: IC200ALG240

• Product Type: Analog Input Module

• Product Family: VersaMax

• Channels: 8 analog inputs

• Data Format: 16-bit input data

• Input Modes: Current or voltage (software/configurable by setup)

• Current Range: 1–20 mA

• Voltage Range: -10 to +10 V DC

• Channel-to-Channel Isolation: 250 V AC continuous, 1500 V AC for 1 minute

• Input-to-Logic Isolation: 250 V AC continuous, 1500 V AC for 1 minute

• Input-to-Ground Isolation: 250 V AC continuous, 1500 V AC for 1 minute

• Group Isolation: No group-to-group isolation

• Diagnostics (typical): Under-range, over-range, open wire, field power loss, high/low alarm, memory-related fault indication

• Indicators: LED status and fault LEDs

• Condition: Brand new

• Weight: Approx. 0.2 kg

• Dimensions: Approx. 11 × 5.5 × 6.5 cm

• System: PLC

• Product Status: Active

• Country of Origin: USA

• HS Code: 8537101190

Application Fit

The IC200ALG240 is used in automation systems where multiple analog signals must be measured and trended, such as pressure, flow, temperature transmitters (via signal conditioning), level sensors, and general process instrumentation.

Typical installations include process skids, packaging and mixing systems, utilities monitoring, and manufacturing lines using VersaMax I/O where reliable analog acquisition, isolation between channels, and diagnostic visibility are required.