{"product_id":"ge-fanuc-ic697bem731f-genius-bus-controller-module-series-90-70","title":"GE Fanuc IC697BEM731F Genius Bus Controller Module Series 90-70","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc IC697BEM731F\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC697BEM731\u003c\/strong\u003e Genius Bus Controller Module, operates as a dedicated hardware component for token-passing serial network interfacing and remote I\/O data scanning within GE Fanuc Series 90-70 rack architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Revision Structure \u0026amp; Bus Topology\u003c\/h3\u003e\n\u003cp\u003eThe IC697BEM731F represents revision F of the single-channel Genius Bus Controller (BCM) for Series 90-70 PLCs. It installs into a single backplane slot, handling asynchronous data transfer between the CPU and up to 30 remote Genius devices. The front faceplate includes a dedicated Hand-Held Monitor (HHM) port for direct network diagnostics and parameter setup.\u003c\/p\u003e\n\u003ch3\u003eTechnical Performance Parameters\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC697BEM731F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.44 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e4.0 cm L x 22.0 cm W x 29.3 cm H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e5.0 VDC (from backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Current Draw\u003c\/td\u003e\n\u003ctd\u003e1.3 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e6.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 30 Genius drops per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Data Rates\u003c\/td\u003e\n\u003ctd\u003e153.6 kbps, 76.8 kbps, 38.4 kbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Cable Type\u003c\/td\u003e\n\u003ctd\u003eBelden 9182 (shielded twisted-pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity \u0026amp; Network Integrity\u003c\/h3\u003e\n\u003cp\u003eExecuting deterministic cycle execution across the Series 90-70 backplane bus, the module processes global and directed peer-to-peer COMREQ communications without degrading backplane communication velocity. Firmware flash compatibility ensures synchronized memory mapping across CPU scans, supporting deterministic token-passing updates to all 30 network drops.\u003c\/p\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x GE Fanuc IC697BEM731F Genius Bus Controller Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation \u0026amp; Network Cabling Rules\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack Power Down:\u003c\/strong\u003e Always de-energize the Series 90-70 rack power supply prior to inserting or extracting the bus controller module from the backplane.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Selection:\u003c\/strong\u003e Use Belden 9182 or equivalent twinaxial shielded twisted-pair cable rated for the selected baud rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Termination:\u003c\/strong\u003e Install a 75-ohm or 150-ohm resistor across the serial bus lines at both physical ends of the trunk cable to eliminate signal reflections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding:\u003c\/strong\u003e Connect the cable shield continuously through all bus drops and ground it at one end only to prevent ground loop currents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the backplane current draw for the IC697BEM731F?\u003c\/p\u003e\n\u003cp\u003eA: The module draws 1.3 A from the 5.0 VDC backplane power rail supplied by the Series 90-70 rack power supply.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How many Genius I\/O devices can be attached to one IC697BEM731F channel?\u003c\/p\u003e\n\u003cp\u003eA: A single bus channel supports up to 30 active Genius drops, including remote I\/O blocks, rack interface units, or Hand-Held Monitors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can the IC697BEM731F be hot-swapped while the rack is powered?\u003c\/p\u003e\n\u003cp\u003eA: No, the Series 90-70 backplane requires complete power de-energization before removing or installing the bus controller card.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What physical interface port is available on the front panel for servicing?\u003c\/p\u003e\n\u003cp\u003eA: The front panel includes a dedicated Hand-Held Monitor (HHM) connector for field service, network setup, and diagnostics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What are the supported network transmission speeds for this module?\u003c\/p\u003e\n\u003cp\u003eA: The module supports Genius bus baud rates of 153.6 kbps (standard\/extended), 76.8 kbps, and 38.4 kbps.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What termination resistance is required for the Genius cable trunk?\u003c\/p\u003e\n\u003cp\u003eA: The network trunk must be terminated with a 75-ohm or 150-ohm resistor at each physical end based on cable impedance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Does the IC697BEM731F support peer-to-peer data communication?\u003c\/p\u003e\n\u003cp\u003eA: Yes, it supports both directed peer-to-peer COMREQ instruction messaging and cyclic global data exchanges across nodes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the maximum bus length supported at 153.6 kbps?\u003c\/p\u003e\n\u003cp\u003eA: At 153.6 kbps, standard trunk length extends up to 2000 ft, or up to 3500 ft when using extended cable configurations.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ge Fanuc","offers":[{"title":"Default Title","offer_id":45519037137069,"sku":"IC697BEM731F","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/ge-fanuc-ic697bem731-genius-bus-controller-jhtz4zwwhah.jpg?v=1766985450","url":"https:\/\/www.maxwellplc.com\/ru\/products\/ge-fanuc-ic697bem731f-genius-bus-controller-module-series-90-70","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}