{"product_id":"cqm1-od214-omron-transistor-output-module-cqm1-series","title":"CQM1-OD214 Omron Transistor Output Module CQM1 Series","description":"\u003cp\u003eThe \u003cstrong\u003eOmron CQM1-OD214\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCQM1-OD214\u003c\/strong\u003e Transistor Output Module, operates as a dedicated hardware component for solid-state DC switching and digital control signal driving within CQM1 PLC Series system racks. This output unit routes high-side PNP switching logic directly to external actuators, relays, and indicator circuits via terminal bus connections. It provides physical switching execution while maintaining electrical separation between internal logic circuitry and external load wiring.\u003c\/p\u003e\n\u003ch3\u003eModule Designation \u0026amp; Variant Mapping\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCQM1\u003c\/strong\u003e: Identifies the modular programmable logic controller architecture and backplane standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOD\u003c\/strong\u003e: Specifies a digital transistor output hardware interface function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e214\u003c\/strong\u003e: Designates 16-point PNP switching configuration with internal fuse protection and specific current handling characteristics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Performance Parameters\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCQM1-OD214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOmron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.21 kg max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e110 mm x 50 mm x 90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e170 mA max at 5 VDC (Internal Backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Points\u003c\/td\u003e\n\u003ctd\u003e16 points (16 points\/common, 1 circuit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003ePNP Transistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Switching Capacity\u003c\/td\u003e\n\u003ctd\u003e50 mA at 4.5 VDC to 300 mA at 26.4 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeakage Current\u003c\/td\u003e\n\u003ctd\u003e0.1 mA max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResidual Voltage\u003c\/td\u003e\n\u003ctd\u003e0.8 V max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003eON delay: 0.1 ms max \/ OFF delay: 0.4 ms max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Fuse\u003c\/td\u003e\n\u003ctd\u003e3.5 A (one per common, 2 used, non-user replaceable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Power Supply\u003c\/td\u003e\n\u003ctd\u003e60 mA min at 5 to 24 VDC +\/-10% (3.5 mA x number of ON points)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eSystem Backplane \u0026amp; Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe hardware interfaces directly with the system backplane bus communication velocity Licences protocol to execute deterministic output state updates every PLC scan cycle. High-density I\/O density scaling allows 16 discrete PNP outputs to operate simultaneously under strict backplane timing without compromising internal noise immunity or triggering firmware flash compatibility faults across connected modules.\u003c\/p\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Omron CQM1-OD214 Module\u003c\/li\u003e\n\u003cli\u003e1 x Terminal Block Protective Cover\u003c\/li\u003e\n\u003cli\u003e1 x Product Documentation Sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSite Installation Practices\u003c\/h3\u003e\n\u003ch4\u003eMechanical Alignment \u0026amp; Mounting\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePower down the main rack supply prior to attaching the module to the CPU or adjacent I\/O unit.\u003c\/li\u003e\n\u003cli\u003eEngage the top and bottom interlocking sliders firmly until the module clicks into the adjacent unit backplane connector.\u003c\/li\u003e\n\u003cli\u003eEnsure the assembly is mounted on a standard 35 mm DIN rail or panel surface within a protective enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWiring \u0026amp; Electrical Grounding\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWire external loads using 22 AWG to 16 AWG stranded copper conductors connected to the terminal block.\u003c\/li\u003e\n\u003cli\u003eConnect external DC power supplies to the designated service power terminals observing correct polarity (+V and COM).\u003c\/li\u003e\n\u003cli\u003eRoute DC output field wiring away from high-voltage AC power lines to minimize induced electromagnetic interference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eQuestions \u0026amp; Answers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCan the internal 3.5 A fuses be replaced in the field if blown?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The internal fuses are soldered directly to the circuit board and are non-user replaceable; blown fuses require module servicing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the default output switching configuration for this unit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe unit utilizes PNP transistor outputs that switch the positive side (+V) of the external power supply to the connected load.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this unit support hot-swapping while the PLC rack is powered?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Removing or inserting the unit while the backplane is energized can damage the internal driver circuits and backplane bus.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the external service power supply calculated for 16 active points?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe service supply requires 60 mA minimum plus 3.5 mA per active ON point at 5 VDC to 24 VDC external supply voltage.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if an external load short-circuit occurs on an output channel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe internal 3.5 A fuse will blow to protect the internal printed circuit board traces from catastrophic thermal failure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum response delay when switching an output state?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum turn-on delay time is 0.1 ms and the maximum turn-off delay time is 0.4 ms under rated load conditions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAre output channels individually isolated from one another?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. All 16 output points share a single common return line and 1 common circuit layout across the terminal strip.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHow is state indication provided on the front interface?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIndividual green LED indicators on the front panel display the ON or OFF logic state of each output channel in real time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Omron","offers":[{"title":"Default Title","offer_id":47306614866093,"sku":"CQM1-OD214","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/cqm1-od214_3.jpg?v=1789363802","url":"https:\/\/www.maxwellplc.com\/ru\/products\/cqm1-od214-omron-transistor-output-module-cqm1-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}