{"product_id":"bently-nevada-330930-060-06-05-extension-cable-3300-system","title":"Bently Nevada 330930-060-06-05 Extension Cable 3300 System","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330930-060-06-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330930-060-06-05\u003c\/strong\u003e Extension Cable, operates as a dedicated hardware component for signal transmission between proximity probes and monitoring systems within machine protection platforms.\u003c\/p\u003e\n\u003ch3\u003eModel Identification Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e060: 6.0 meters (19.7 feet) cable length.\u003c\/li\u003e\n\u003cli\u003e06: FluidLoc cable without stainless steel armor.\u003c\/li\u003e\n\u003cli\u003e05: Multiple agency approvals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330930-060-06-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e20.3 x 22 x 3.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e0 W (Passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eFluidLoc Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe 330930-060-06-05 extension cable maintains the system impedance necessary to support the 7.87 V\/mm scale factor of Bently Nevada proximity transducer systems. To ensure accurate rotor dynamics analysis, the connection must be verified to maintain the target gap voltage, typically -10 VDC when measured at the proximitor output. The cable shielding is engineered for cross-talk suppression in multi-channel installations, which prevents signal noise injection from neighboring sensor channels. Proper termination of the cable shield is required to maintain measurement linearity and prevent ground loops that could introduce errors in vibration data.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330930-060-06-05 Extension Cable\u003c\/li\u003e\n\u003cli\u003e1 x Connector interface documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable Management\n\u003cul\u003e\n\u003cli\u003eRoute the extension cable through dedicated instrumentation trays away from high-voltage power conduits.\u003c\/li\u003e\n\u003cli\u003eSecure the cable at intervals not exceeding 30 cm using non-conductive cable ties to minimize mechanical vibration-induced fatigue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectrical Termination\n\u003cul\u003e\n\u003cli\u003eInspect both ends of the coaxial connection for debris or dielectric contamination before mating the connectors.\u003c\/li\u003e\n\u003cli\u003eEnsure the connectors are fully seated and tight to maintain constant contact resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGrounding\n\u003cul\u003e\n\u003cli\u003eVerify that the extension cable shield is connected to the common ground at the proximitor end per the system installation manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the primary purpose of the FluidLoc cable construction?\u003c\/p\u003e\n\u003cp\u003eThe FluidLoc design prevents the migration of process fluids through the cable jacket via capillary action, protecting the interior conductors from degradation in harsh environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this cable be used with non-Bently Nevada monitoring systems?\u003c\/p\u003e\n\u003cp\u003eSystem compatibility depends on impedance matching and probe scaling requirements; check the host monitor's input impedance specifications before installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the cable length field-adjustable?\u003c\/p\u003e\n\u003cp\u003eNo. Altering the cable length will modify the capacitance and inductance of the loop, which directly affects the system calibration and accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow should I handle a signal loss or intermittent reading?\u003c\/p\u003e\n\u003cp\u003eVerify the physical connection at both the probe and the proximitor, and inspect the cable for any signs of mechanical damage or crushing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat should the gap voltage be for this system?\u003c\/p\u003e\n\u003cp\u003eThe target gap voltage is typically -10 VDC; confirm this against the specific transducer calibration sheet provided with the probe.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs this cable suitable for use in high-temperature zones?\u003c\/p\u003e\n\u003cp\u003eThe assembly is rated for operation up to +177 deg C; ensure the selected path avoids direct contact with steam lines or extreme heat sources.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the cable require specific grounding precautions?\u003c\/p\u003e\n\u003cp\u003eThe shield should be grounded only at the proximitor end to prevent ground loops that can introduce electrical noise into the monitoring signal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the cable be used for axial position measurement?\u003c\/p\u003e\n\u003cp\u003eYes, this extension cable is compatible with both radial vibration and axial position measurement configurations within the 3300 series.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026785620141,"sku":"330930-060-06-05","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian8_8f01224b-9dfa-49bb-a919-0ac706e79084.jpg?v=1783411887","url":"https:\/\/www.maxwellplc.com\/ru\/products\/bently-nevada-330930-060-06-05-extension-cable-3300-system","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}