The ABB CI570 3BSE001440R1, also cataloged as the CI570 MasterFieldbus Controller, operates as a dedicated hardware component for fieldbus communication management within ABB Advant Master control system platforms.

Model Identification

Hardware Specifications

Industrial Control Communication Architecture

The CI570 controller manages fieldbus communication functions inside the ABB Advant Master automation architecture. The module provides the interface layer between the control system processor and connected field devices through the MasterFieldbus communication structure.

The controller is designed for deterministic industrial data exchange, where communication timing, field device addressing, and process data transfer are handled according to the configured fieldbus network parameters.

For ABB PLC and DCS architectures, module integration depends on the installed system configuration, firmware compatibility, and corresponding communication database settings.

Advant Master Bus Integration

The CI570 is configured for ABB system-level communication tasks, including:

• Fieldbus master operation within Advant Master systems
• Cyclic process data exchange with connected field devices
• Network communication management between controller modules and fieldbus segments
• Hardware-level coordination of fieldbus communication channels

The module belongs to ABB industrial control hardware where backplane bus communication velocity and firmware compatibility affect system communication behavior. Replacement modules require verification of system software revision and hardware configuration parameters before installation.

Ordering Information

• 1 x ABB CI570 MasterFieldbus Controller
• 1 x 3BSE001440R1 hardware module reference
• Additional cables, configuration software, manuals, and accessories are not included unless specified separately

Installation Guidelines

• Install the module according to the ABB Advant Master hardware configuration requirements.
• Verify the rack position and controller addressing before powering the system.
• Ensure fieldbus wiring follows industrial grounding and shielding practices.
• Check connector conditions and avoid mechanical stress on communication interfaces.
• Confirm firmware and configuration compatibility before replacing an existing controller.
• Disconnect system power before removing or inserting the module unless the system documentation specifically allows hot replacement.

Technical Questions and Answers

• Can the CI570 be installed in any ABB control rack?
  The CI570 requires compatibility with the Advant Master hardware architecture and the correct rack configuration defined by ABB system documentation.
• What communication function does the CI570 provide?
  The module operates as a MasterFieldbus Controller responsible for managing fieldbus communication exchange within the control system.
• Does the CI570 support hot-swap replacement?
  Hot-swap operation depends on the installed Advant Master system design. Power isolation procedures should be followed unless documented otherwise.
• What should be checked before replacement installation?
  Hardware type, firmware compatibility, communication configuration, and system database parameters should be verified before installation.
• What is the operating temperature range of CI570?
  The provided technical data does not specify an operating temperature range. Refer to ABB Advant Master system documentation for environmental limits.
• Does CI570 require special grounding?
  Fieldbus installation should follow standard industrial grounding and shielding methods to reduce communication interference.
• What type of signals does CI570 process?
  The module handles digital communication data through the MasterFieldbus network rather than direct analog or discrete field signals.
• Is configuration software included with the module?
  Configuration tools and software packages are separate system components and are not included with the hardware module.