{"product_id":"9571-99-bently-nevada-velomitor-standard-interconnect-cable","title":"9571-99 Bently Nevada Velomitor Standard Interconnect Cable","description":"\u003cp\u003eConfigured for low-frequency vibration signal transmission across machinery monitoring architectures, the \u003cstrong\u003eBently Nevada 9571-99\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e9571-99\u003c\/strong\u003e Standard Interconnect Cable, operates as a dedicated hardware component for signal routing between sensors and monitoring systems.\u003c\/p\u003e\n\u003ch3\u003eConfiguration Matrix \u0026amp; Suffix Overview\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBase Model Code: 9571 (Standard interconnect cable designation)\u003c\/li\u003e\n\u003cli\u003eLength Suffix: 99 (99 ft \/ 30.0 m total physical conductor length)\u003c\/li\u003e\n\u003cli\u003eConductor Configuration: 2-conductor twisted pair with overall shield\u003c\/li\u003e\n\u003cli\u003eTerminal Architecture: Moisture-resistant female connector at sensor end and ring lugs at monitor end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications Table\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e9571-99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e27 cm x 25 cm x 3 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-29 deg C to +121 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive wiring harness (No electrical power consumption)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Gauge\u003c\/td\u003e\n\u003ctd\u003e22 AWG (0.382 mm2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation Material\u003c\/td\u003e\n\u003ctd\u003eTefzel insulated with overall shielding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotor Dynamics and Signal Transmission Integrity\u003c\/h3\u003e\n\u003cp\u003eThe cable assembly establishes a low-noise electrical path required for absolute vibration and velocity transducers operating in demanding industrial environments. Proper shielding and twisted-pair construction ensure cross-talk suppression and immunity against electromagnetic interference along long signal runs. While monitoring casing and bearing housing vibration, maintaining signal fidelity prevents distortion during low-frequency velocity tracking, ensuring accurate correlation with rotor dynamics parameters.\u003c\/p\u003e\n\u003ch3\u003eStandard Delivery Content Manifest\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 99 ft (30.0 m) Standard Interconnect Cable Assembly\u003c\/li\u003e\n\u003cli\u003e1 x Integrated Moisture-Resistant Female Sensor Connector\u003c\/li\u003e\n\u003cli\u003e1 x Set of Terminal Ring Lugs for Monitor Termination\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Installation and Routing Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVisual Inspection: Check the entire 99-foot cable length for physical cuts, tight kinks, or insulation abrasion before pulling through conduits.\u003c\/li\u003e\n\u003cli\u003eConnector Cleanliness: Verify that the 2-socket female connector and terminal lugs remain free of moisture, oil, and corrosion prior to mating.\u003c\/li\u003e\n\u003cli\u003eConduit Separation: Route the interconnect cable through dedicated instrument trays, maintaining strict separation from high-voltage power lines.\u003c\/li\u003e\n\u003cli\u003eStrain Relief: Fasten the cable securely near termination points to prevent continuous mechanical vibration from fatiguing the connector pins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions and Technical Responses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat exact physical length is designated by the 99 suffix code?\u003c\/p\u003e\n\u003cp\u003eThe 99 suffix denotes an overall physical cable length of 99 feet or 30.0 meters.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat wire gauge size is utilized for the internal conductors?\u003c\/p\u003e\n\u003cp\u003eThe internal conductors consist of 22 AWG wire with a cross-sectional area of 0.382 mm2.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat type of insulation material is applied to the cable core?\u003c\/p\u003e\n\u003cp\u003eThe conductors utilize Tefzel insulation paired with an overall protective shielding layer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this cable be utilized in hazardous classified areas?\u003c\/p\u003e\n\u003cp\u003eNo, due to system capacitance constraints, this interconnection setup is unapproved for hazardous environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat type of connector is factory-fitted at the transducer end?\u003c\/p\u003e\n\u003cp\u003eThe transducer end features a moisture-resistant female connector designed for 2-pin MIL-C-5015 style plugs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is the monitor end of the cable prepared for termination?\u003c\/p\u003e\n\u003cp\u003eThe monitor end is fitted with terminal ring lugs designed for direct attachment to monitoring rack terminals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the continuous operating temperature range limit?\u003c\/p\u003e\n\u003cp\u003eThe cable operates reliably within a thermal range of -29 deg C to +121 deg C (-20 deg F to +250 deg F).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs this cable compatible with 21128 velocity transducer housings?\u003c\/p\u003e\n\u003cp\u003eNo, this specific interconnect cable is not engineered for use with 21128 velocity transducer housings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025231761581,"sku":"9571-99","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian_2_78e27592-39a9-4cea-98df-86e8015e0f42.jpg?v=1783500927","url":"https:\/\/www.maxwellplc.com\/ru\/products\/9571-99-bently-nevada-velomitor-standard-interconnect-cable","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}