{"product_id":"3500-62-136483-01-bently-nevada-3500-series-process-variable-monitor","title":"3500\/62 136483-01 Bently Nevada 3500 Series Process Variable Monitor","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 3500\/62 136483-01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e3500\/62\u003c\/strong\u003e Process Variable Monitor, operates as a dedicated hardware component for signal conditioning and data acquisition within 3500 Machinery Protection System networks.\u003c\/p\u003e\n\u003ch3\u003eModel Configuration Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3500\/62: Base model designation for the six-channel process variable monitor.\u003c\/li\u003e\n\u003cli\u003e136483: Part number referencing the specific firmware and hardware assembly version.\u003c\/li\u003e\n\u003cli\u003e01: Identifies the standard I\/O module configuration with terminal blocks for direct current input handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e3500\/62 136483-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e2.6 x 25.3 x 24 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to +65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e7.0 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal\u003c\/td\u003e\n\u003ctd\u003e-10 Vdc to +10 Vdc \/ 4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e500 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransducer Power\u003c\/td\u003e\n\u003ctd\u003e+24 Vdc @ 250 mA max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring and Signal Validation\u003c\/h3\u003e\n\u003cp\u003eThe 3500\/62 monitor provides 500 V of galvanic isolation between channels and the system backplane to prevent ground loop noise from corrupting low-level process variable inputs. When monitoring process variables such as pressure or flow, the module applies high-speed A\/D conversion to ensure data integrity before broadcasting values to the Transient Data Interface. Verification of transducer health is maintained through continuous loop monitoring; if a 4-20 mA signal drops below 4 mA or exceeds 20 mA, the module flags an OK condition fault. Calibration protocols require that the input impedance is matched to the transducer output to maintain the specified measurement accuracy across the full scale of the configured process variable.\u003c\/p\u003e\n\u003ch3\u003eOrdering Info\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e1 x 3500\/62 136483-01 Process Variable Monitor\u003c\/li\u003e\n\u003cli\u003e1 x I\/O Module (associated with the 3500\/62 series)\u003c\/li\u003e\n\u003cli\u003e1 x Terminal block connector set\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGrounding: Ensure the 3500 rack backplane is connected to a dedicated instrument ground to minimize common-mode voltage interference.\u003c\/li\u003e\n\u003cli\u003eShielding: Utilize twisted-pair shielded cabling for all process variable inputs and terminate shields at the designated ground studs on the rack.\u003c\/li\u003e\n\u003cli\u003eHot-Swapping: Ensure the module is properly latched into the rack guide before engaging the backplane connector to avoid transient surges during insertion.\u003c\/li\u003e\n\u003cli\u003ePower Sequencing: Confirm that +24 Vdc auxiliary power is within tolerance before connecting active transmitters to the fused output terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Does this module support redundant power inputs?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the 3500\/62 module draws power from the rack's redundant 3500\/15 power supplies, ensuring continuous operation during a single power source failure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can this module monitor vibration?\u003c\/p\u003e\n\u003cp\u003eA: No, the 3500\/62 is strictly for process variables like pressure, flow, or temperature; vibration monitoring is performed by dedicated 3500\/42M or 3500\/44M modules.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the maximum voltage compliance for the 4-20 mA loop?\u003c\/p\u003e\n\u003cp\u003eA: The module provides 13.66 V of compliance voltage to drive active transmitters in the field loop.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How are alarms configured for this module?\u003c\/p\u003e\n\u003cp\u003eA: Alarms are configured via the 3500 Rack Configuration Software and are triggered based on user-defined setpoints assigned to specific process variables.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is the 3500\/62 hot-swappable?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module supports hot-swapping within a powered 3500 rack without requiring a system shutdown.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What does the OK LED status indicate?\u003c\/p\u003e\n\u003cp\u003eA: A solid green OK LED indicates that the module is powered, passing internal self-diagnostics, and that all configured input channels are within normal range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can I use this module with both voltage and current inputs?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module is configured to accept either -10 Vdc to +10 Vdc or 4-20 mA current inputs depending on the I\/O module selection and software setup.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How do I update the firmware on this module?\u003c\/p\u003e\n\u003cp\u003eA: Firmware updates are performed through the 3500 Transient Data Interface (TDI) module using the configuration software suite.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026736435373,"sku":"136483-01","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/136483-01-23.jpg?v=1783499611","url":"https:\/\/www.maxwellplc.com\/ru\/products\/3500-62-136483-01-bently-nevada-3500-series-process-variable-monitor","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}