{"product_id":"330930-065-00-05-bently-nevada-extension-cable-3300-xl-nsv","title":"330930-065-00-05 Bently Nevada Extension Cable 3300 XL NSv","description":"\u003cp\u003eConfigured for high-frequency signal propagation within 3300 XL NSv Proximity Transducer Systems, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330930-065-00-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e330930-065-00-05\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExtension Cable) provides direct electrical connectivity between the proximity probe and the monitoring interface. This hardware component maintains specific loop impedance required for millivolt-per-unit gap measurement.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe 330930-065-00-05 part number specifies a distinct cable length and shielding configuration optimized for NSv (Near-field) transducer applications. The \"065\" suffix indicates a fixed length of 6.5 meters, while the \"00-05\" suffix delineates specific connector and jacket standards. No variance in mechanical length or impedance tolerance is permitted for this part number, as system calibration is dependent on the original factory-defined loop resistance.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330930-065-00-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.18 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20.4 x 22.0 x 3.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-40 deg C to +70 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive Component\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHS Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8537101190\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eBently Nevada TSI Mechanical Monitoring Characteristics\u003c\/h3\u003e\n\u003cp\u003eThis extension cable is a passive component of the eddy-current probe scaling circuitry. It is calibrated to ensure that gap voltage validation remains within the -10 VDC target range at the proximity sensor interface. The coaxial construction is engineered for effective cross-talk suppression in high-density rack configurations, ensuring that vibration signals from adjacent channels do not interfere with raw transducer inputs. Proper impedance matching is maintained throughout the signal path to support accurate rotor dynamics data acquisition without phase shift or signal attenuation.\u003c\/p\u003e\n\u003ch3\u003e## Ordering info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e330930-065-00-05 extension cable unit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStandard technical compliance documentation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNote: Proximity probes and Proximitor sensors are separate line items.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eConnector Handling\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eUse only approved tools to tighten threaded connectors to the specified torque.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnsure connector mating surfaces are free of contaminants or oils to prevent contact resistance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCable Routing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eMaintain a minimum bend radius of 2.5 cm to prevent damage to the internal coaxial core.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSecure the cable using non-conductive, vibration-resistant cable ties.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRoute cables in isolated conduits to prevent electromagnetic interference from secondary power lines.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLogistics and Handling\u003c\/h2\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eDelivery time: 3-5 days when payment finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShipping via DHL, FEDEX, or UPS.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEvery unit is shipped in high-grade anti-static industrial packaging to prevent electrostatic discharge and mechanical shock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this cable be trimmed to fit a shorter installation distance?\u003c\/p\u003e\n\u003cp\u003eA: No, trimming the cable will alter the loop impedance and capacitance, resulting in a loss of calibration accuracy for the transducer system.\u003c\/p\u003e\n\u003cp\u003eQ: What is the significance of the 6.5 meter designation?\u003c\/p\u003e\n\u003cp\u003eA: The total system length includes the probe, extension cable, and Proximitor; the 6.5 meter length is a fixed parameter for impedance-based signal scaling.\u003c\/p\u003e\n\u003cp\u003eQ: How is the shield grounded in this configuration?\u003c\/p\u003e\n\u003cp\u003eA: The cable shield should be tied to the instrument ground at the monitoring rack to prevent ground loops that introduce signal noise.\u003c\/p\u003e\n\u003cp\u003eQ: Is this component field-repairable?\u003c\/p\u003e\n\u003cp\u003eA: No, the cable assembly is a sealed unit; internal conductor damage or connector failure requires complete assembly replacement.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45378087583917,"sku":"330930-065-00-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330930-065-00-05-3300-xl-nsv-extension-cable-ullgkoscfm2.jpg?v=1764225465","url":"https:\/\/www.maxwellplc.com\/ru\/products\/330930-065-00-05-bently-nevada-extension-cable-3300-xl-nsv","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}