{"product_id":"330908-00-16-10-02-05-bently-nevada-3300-nsv-proximity-probes","title":"330908-00-16-10-02-05 Bently Nevada 3300 NSv Proximity Probes","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330908-00-16-10-02-05\u003c\/strong\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330908\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3300 NSv Proximity Probe, operates as a dedicated hardware component for eddy-current displacement sensing in constrained-space, small-shaft rotating machinery within turbine monitoring (TSI) platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe 330908-00-16-10-02-05 follows the specialized 3300 NSv (Near-field Sensing) transducer nomenclature:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e330908: 3300 NSv proximity probe (Reverse mount).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e00: Unthreaded length (0 mm).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e16: Overall case length (16 mm).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10: Total length (1.0 meter).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e02: Connector type (Connector with housing).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e05: Agency approval (CSA\/NRTL\/C).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330908-00-16-10-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.12 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20.0 x 20.0 x 5.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMounting Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eReverse Mount\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Sensing and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv system is engineered for applications where standard 8 mm probes lack the required linear range or mounting clearance. The system translates high-frequency displacement signals into linear voltage outputs via precise eddy-current probe scaling. During setup, gap voltage validation is a mandatory procedure; a target operational setpoint of -10 VDC is required to center the transducer in its linear operating region. The internal architecture includes cross-talk suppression to maintain signal fidelity in high-density sensor arrays. This probe is used for monitoring rotor dynamics, detecting shaft centerline position, and identifying radial vibration in small-diameter industrial machinery.\u003c\/p\u003e\n\u003ch3\u003eOrdering info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eOne (1) 330908-00-16-10-02-05 NSv Proximity Probe.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMounting hardware (jam nuts and lock washers).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTechnical compliance documentation (CSA\/NRTL\/C certified).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNote: This system requires a matched NSv Proximitor and extension cable to maintain calibrated accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eMechanical Interface: Mount the probe from the interior of the machine case; ensure the mounting surface is flat and rigid to prevent resonance-induced noise.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGap Setting: Utilize a depth micrometer to establish the mechanical gap; verify the output voltage at the Proximitor test pin (Target: -10 VDC).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCabling: Route the miniature coaxial cable with care; avoid sharp bends and maintain separation from high-energy power lines to reduce EMI.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnector Integrity: Ensure the miniature coaxial connectors are fully seated and clean; use protective caps if the assembly is exposed to environmental contaminants.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVibration Locking: Secure jam nuts to prevent thread movement during operation, ensuring the gap remains constant throughout the machine cycle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eWhy is the NSv series required for small-shaft applications?\u003c\/p\u003e\n\u003cp\u003eThe 3300 NSv system features a smaller probe tip and optimized magnetic field, providing superior linearity on small-diameter shafts where 8 mm probes exhibit excessive edge effects.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs this probe compatible with standard 3300 XL Proximitors?\u003c\/p\u003e\n\u003cp\u003eNo. The NSv probe has unique electrical characteristics and must be used exclusively with the NSv Proximitor to ensure valid measurement data.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the target gap voltage for this model?\u003c\/p\u003e\n\u003cp\u003eThe target gap voltage is -10 VDC, which centers the probe within its calibrated linear displacement range for optimal vibration measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is the case length (16 mm) measured?\u003c\/p\u003e\n\u003cp\u003eThe 16 mm measurement defines the total length of the probe housing, essential for verifying fitment in restricted internal mounting environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan I use this probe in a hazardous area?\u003c\/p\u003e\n\u003cp\u003eThe \"05\" suffix indicates CSA\/NRTL\/C approval; verify that your entire system (Probe, Cable, Proximitor) meets the required hazardous area classification.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the probe tip field-replaceable?\u003c\/p\u003e\n\u003cp\u003eNo. The tip is permanently bonded to the probe body; physical damage to the tip or body requires replacing the entire probe assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this probe require a specific target material?\u003c\/p\u003e\n\u003cp\u003eThe system is calibrated for 4140 steel. Alternative target materials will alter sensitivity and require a material-specific calibration factor adjustment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is a failure in the NSv system typically identified?\u003c\/p\u003e\n\u003cp\u003eFailure is indicated by an erratic or fixed output voltage on the monitoring rack, often caused by probe tip impact, mechanical housing damage, or cable discontinuity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518840627373,"sku":"330908-00-16-10-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330908-00-16-10-02-05-3300-nsv-proximity-probes-4u5g2xg4edp.jpg?v=1766980214","url":"https:\/\/www.maxwellplc.com\/ru\/products\/330908-00-16-10-02-05-bently-nevada-3300-nsv-proximity-probes","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}