{"product_id":"330703-000-050-10-11-00-bently-nevada-proximity-probes-3300-xl-11mm-series","title":"330703-000-050-10-11-00 Bently Nevada Proximity Probes 3300 XL 11mm Series","description":"\u003cp data-path-to-node=\"4\"\u003eThe \u003cb data-path-to-node=\"4\" data-index-in-node=\"4\"\u003eBently Nevada 330703-000-050-10-11-00\u003c\/b\u003e serves as the primary \u003cb data-path-to-node=\"4\" data-index-in-node=\"64\"\u003e330703\u003c\/b\u003e Proximity Probes utilized to execute non-contacting displacement and vibration tracking across 3300 XL 11mm Series platforms. The hardware registers proximity variations via eddy-current field modulations on a conductive target surface, converting mechanical motion into precise RF signals for machinery protection infrastructure.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"5\"\u003eSuffix Nomenclature Breakdown\u003c\/h3\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,0,0\"\u003e\u003cb data-path-to-node=\"6,0,0\" data-index-in-node=\"0\"\u003e330703\u003c\/b\u003e: 3300 XL 11 mm Probe base module with M14 x 1.5 metric thread, supplied without protective armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,1,0\"\u003e\u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"0\"\u003e-000\u003c\/b\u003e: Unthreaded Length Option establishing 0 mm of non-threaded case space.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,2,0\"\u003e\u003cb data-path-to-node=\"6,2,0\" data-index-in-node=\"0\"\u003e-050\u003c\/b\u003e: Overall Case Length Option defining a 50 mm mechanical housing length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,3,0\"\u003e\u003cb data-path-to-node=\"6,3,0\" data-index-in-node=\"0\"\u003e-10\u003c\/b\u003e: Total Length Option specifying a 1.0 meter (3.3 feet) integral system connection line.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,4,0\"\u003e\u003cb data-path-to-node=\"6,4,0\" data-index-in-node=\"0\"\u003e-11\u003c\/b\u003e: Connector and Cable-Type Option utilizing a miniature coaxial ClickLoc connector with an integrated protector sleeve and specialized FluidLoc cable construction.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,5,0\"\u003e\u003cb data-path-to-node=\"6,5,0\" data-index-in-node=\"0\"\u003e-00\u003c\/b\u003e: Agency Approval Option dictating no hazardous area certification is required for the build.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable data-path-to-node=\"8\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,1,0,0\"\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,1,1,0\"\u003e330703-000-050-10-11-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,2,0,0\"\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,2,1,0\"\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,3,0,0\"\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,3,1,0\"\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,4,0,0\"\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,4,1,0\"\u003e0.14 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,5,0,0\"\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,5,1,0\"\u003e122.0 x 2.7 x 2.2 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,6,0,0\"\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,6,1,0\"\u003e-51 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,7,0,0\"\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,7,1,0\"\u003ePassive element supplied by constant current loop from external Proximitor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,8,0,0\"\u003eThread Profile\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,8,1,0\"\u003eM14 x 1.5 metric standard layout\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,9,0,0\"\u003eIntegral Line Length\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,9,1,0\"\u003e1.0 meter (3.3 feet) nominal\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,10,0,0\"\u003eCable Specification\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,10,1,0\"\u003eFluidLoc moisture-resistant configuration\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,11,0,0\"\u003eInterconnect Design\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,11,1,0\"\u003eMiniature coaxial ClickLoc with connector protector sleeve\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,12,0,0\"\u003eCasing Shell\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,12,1,0\"\u003eUnarmored cylindrical housing layout\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,13,0,0\"\u003eTariff Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"8,13,1,0\"\u003e8537101190\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eEddy-Current Probe Scaling and Cross-Talk Suppression\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eThe 330703-000-050-10-11-00 utilizes matched internal impedance metrics to interact with the external Proximitor driver, establishing a baseline eddy-current probe scaling profile of 3.94 V\/mm (100 mV\/mil). Static gap calibration requires adjusting the sensor body until the gap voltage validation reads exactly -10 VDC at the geometric center of the linear curve. This calibration prevents signal saturation and preserves optimal cross-talk suppression between orthogonal X\/Y channels, yielding pure high-frequency vibration data required to plot dynamic rotor dynamics behavior without electromagnetic noise artifacts.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"11\"\u003eShipping Box Contents\u003c\/h3\u003e\n\u003cul data-path-to-node=\"12\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,0,0\"\u003e1 x Bently Nevada 330703-000-050-10-11-00 Proximity Probe Unit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,1,0\"\u003e2 x Hexagonal Clamping Jam Nuts for M14 x 1.5 Threads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12,2,0\"\u003e1 x Factory Installed ClickLoc Connector Protector\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"13\"\u003eMechanical Alignment Guidelines\u003c\/h3\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003eThread Torque Control\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14,0,1\"\u003eMount the M14 x 1.5 threaded casing using an approved torque wrench, ensuring that maximum limits are not exceeded to avoid cracking the ceramic tip assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,1,0\"\u003e\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003eFluidLoc Separation Integrity\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14,1,1\"\u003eRoute the specialized FluidLoc cable body through liquid-sealed entries, ensuring the fluid-resistant barrier maintains containment limits across the target machine enclosure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,2,0\"\u003e\u003cb data-path-to-node=\"14,2,0\" data-index-in-node=\"0\"\u003eMinimum Bending Constraints\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14,2,1\"\u003eMaintain a physical bend radius of not less than 25.4 mm (1.0 inch) during line installation to prevent micro-fractures in the internal coaxial wire insulation layer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,3,0\"\u003e\u003cb data-path-to-node=\"14,3,0\" data-index-in-node=\"0\"\u003eConnector Protector Engagement\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"14,3,1\"\u003eCheck that the pre-installed silicone connector protector is pulled tightly over the ClickLoc coupling interface to secure the path against oil and mist ingress.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"15\"\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul data-path-to-node=\"16\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,0,0\"\u003eCan the coaxial terminal joint of this 1.0-meter probe assembly be hot-swapped while powered?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,0,1\"\u003eYes, but breaking the connection will open the loop, immediately causing the channel OK relay to trip and dropping the output voltage to a fault state.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,1,0\"\u003eWhat is the specific utility of the FluidLoc option on this proximity model?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,1,1\"\u003eThe FluidLoc cable structure incorporates internal blocks that prevent oil or process fluids from leaking through the cable core if the outer jacket is cut.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,2,0\"\u003eHow does an engineer confirm the physical installation gap matches technical parameters?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,2,1\"\u003eMeasure the voltage between the Proximitor output terminals during adjustment until the signal reaches the required -10 VDC target zone.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,3,0\"\u003eDoes this unarmored line option support installation inside open machinery areas?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,3,1\"\u003eNo, unarmored lines lack outer steel braiding and must be routed through rigid metal conduit to prevent damage from flying metal debris.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,4,0\"\u003eWhat happens to the eddy-current probe scaling if this 1.0-meter probe is paired with an incorrect 5.0-meters extension line?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,4,1\"\u003eThe overall loop length would fail to match the 9.0-meters system calibration, shifting the scale factor and introducing massive measurement errors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,5,0\"\u003eWhat physical symptom indicates that the target shaft face has excessive electrical runout?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,5,1\"\u003eThe monitor will capture a recurring waveform pattern at 1x running speed, which distorts the accuracy of genuine rotor dynamics logs.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,6,0\"\u003eCan this M14 x 1.5 thread assembly be forced into an imperial clearance hole?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,6,1\"\u003eNo, mismatching metric threads with imperial brackets will strip the hardware casing, causing misalignment and destroying the probe.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"16,7,0\"\u003eWhat insulation test verify that the internal shield has not shorted to the machine case?\u003c\/p\u003e\n\u003cp data-path-to-node=\"16,7,1\"\u003eMeasure resistance between the outer connector barrel and the machine ground; the meter should display an open circuit reading.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025236840621,"sku":"330703-000-050-10-11-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xianxian_15_2508eeed-4c00-41b7-ac44-1acc9058a99a.jpg?v=1783781891","url":"https:\/\/www.maxwellplc.com\/ru\/products\/330703-000-050-10-11-00-bently-nevada-proximity-probes-3300-xl-11mm-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}