Configured for high-precision vibration and shaft position telemetry within machinery protection loops, the Bently Nevada 330173-00-18-10-02-05 (330173-00-18-10-02-05 3300 5mm Proximity Probe) provides direct physical/electrical execution.

Suffix Breakdown and Configuration Matrix

• Base Model: 330173
• Unthreaded Length Option: 00 (0.0 mm unthreaded length)
• Overall Case Length Option: 18 (180 mm case length)
• Total Length Option: 10 (1.0 meter total cable length)
• Connector Option: 02 (Miniature coaxial ClickLoc connector standard cable)
• Agency Approval Option: 05 (Multiple Approvals)

Hardware Specifications

Rotor Dynamics Architecture and Signal Processing

Engineered for precision shaft observation, this 5 mm transducer system relies on consistent eddy-current probe scaling to convert physical displacement into linear voltage variations. Operational setup requires rigorous gap voltage validation targeting a nominal -10 VDC baseline at mid-linear range to ensure maximum dynamic tracking range. Dual-probe installations must respect strict spatial separation rules to enforce cross-talk suppression, preventing high-frequency electromagnetic field interference from distorting rotor dynamics diagnostics.

Ordering Information

• 1 x 330173-00-18-10-02-05 3300 5mm proximity probe unit
• 1 x Miniature coaxial ClickLoc connector protection cap
• 1 x Agency compliance documentation sheet

Field Installation Guidelines

• Thread Engagement: Secure the M8 x 1 probe body into the mounting hole ensuring proper thread alignment without stripping the machine casing.
• Target Centering: Center the probe tip over the observed conductive surface to maintain a linear working range between 0.25 mm and 1.5 mm.
• Connector Latching: Thread and snap the miniature coaxial ClickLoc connector completely to eliminate loose contacts under heavy machine vibration.
• Cable Routing: Route the coaxial lead away from high-power motor cables and secure it with insulated clamps to prevent mechanical abrasion.

Frequently Asked Questions

• What specific mechanical thread standard is utilized on the 330173 probe body?

  It features an M8 x 1 metric mounting thread configuration designed for direct insertion into machinery transducer brackets.

• Does this probe variant include built-in protective armor on the coaxial cable?

  No, this specific part number is supplied without stainless steel cable armor, utilizing a standard flexible coaxial lead.

• How is the probe tip secured to the body to withstand high vibration?

  It incorporates a patented TipLoc molding method that creates an exceptionally robust bond between the probe tip and its PPS body.

• What is the function of the miniature coaxial ClickLoc connector?

  It provides a secure, vibration-resistant electrical coupling interface between the probe lead and the system extension cable.

• Why is gap voltage adjustment critical during initial setup?

  Tuning the initial mechanical gap to achieve a steady -10 VDC reading ensures the probe operates directly in the center of its linear range.

• Does the 5 mm probe require dedicated bench calibration prior to installation?

  No, 3300 XL transducer components are completely interchangeable, eliminating the need for individual component matching or manual calibration.

• What primary physical parameters can this sensor system measure simultaneously?

  It measures both static shaft position displacement and dynamic vibration waveforms on fluid-film bearing machinery.

• How does the system prevent oil leaks along the interior of the cable?

  Specific configurations can incorporate Fluidloc cable options that block oil and fluid migration through the internal conductor bundle.