{"product_id":"330104-05-12-10-02-00-bently-nevada-3300-xl-proximity-probes","title":"330104-05-12-10-02-00 Bently Nevada 3300 XL Proximity Probes","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330104-05-12-10-02-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330104-05-12-10-02-00\u003c\/strong\u003e Proximity Probes, operates as a dedicated hardware component for capturing radial vibration and axial shaft displacement within rotating machinery monitoring loops.\u003c\/p\u003e\n\u003ch3\u003ePart Number Breakdown and Matrix Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBase Model and Thread Configuration: 330104 (M10 x 1 thread with protective armor)\u003c\/li\u003e\n\u003cli\u003eUnthreaded Length Designation: 05 (50 mm minimum unthreaded length)\u003c\/li\u003e\n\u003cli\u003eOverall Case Length Specification: 12 (120 mm minimum case length)\u003c\/li\u003e\n\u003cli\u003eTotal System Cable Length: 10 (1.0 meter \/ 3.3 feet integrated cable format)\u003c\/li\u003e\n\u003cli\u003eConnector Type Indicator: 02 (Miniature coaxial ClickLoc connector interface)\u003c\/li\u003e\n\u003cli\u003eRegulatory Compliance Option: 00 (No hazardous area approval required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications Table\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-05-12-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.14 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e1.8 cm x 1.5 cm x 113 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePowered via 3300 XL Proximitor Sensor loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Measurement Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Sensitivity\u003c\/td\u003e\n\u003ctd\u003e7.87 mV\/um (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eCross-Talk Suppression and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe transducer mechanism utilizes high-frequency radio frequency modulation to evaluate physical target displacement. To maintain measurement accuracy, gap voltage validation must confirm a nominal -10 VDC baseline reading when the probe tip rests at mid-scale relative to the conductive shaft surface. Signal routing requires strict spatial separation from high-current power conductors to prevent electrical cross-talk and maintain linear voltage scaling across multi-channel protection racks.\u003c\/p\u003e\n\u003ch3\u003eDelivery Scope and Kit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3300 XL 8 mm Proximity Probe with Armor\u003c\/li\u003e\n\u003cli\u003e1 x M10 x 1 Threaded Locking Nut\u003c\/li\u003e\n\u003cli\u003e1 x Fluorocarbon Protective Terminal Boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Installation and Cabling Parameters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread Insertion: Apply standardized thread engagement limits into the machine housing port, ensuring proper perpendicular alignment to the observed shaft journal.\u003c\/li\u003e\n\u003cli\u003eArmor Protection: Route the armored cable section through high-stress mechanical zones to prevent abrasive wear and physical impact damage.\u003c\/li\u003e\n\u003cli\u003eCable Bending: Maintain a minimum bend radius above manufacturer thresholds along the coaxial run to prevent internal conductor deformation.\u003c\/li\u003e\n\u003cli\u003eConnector Security: Fasten the ClickLoc coaxial connector firmly to eliminate intermittent electrical contact under high vibration conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions and Technical Responses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the nominal output sensitivity of this transducer model?\u003c\/p\u003e\n\u003cp\u003eThe output scale factor is calibrated to 7.87 mV\/um when paired with an approved 3300 XL Proximitor sensor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this specific part number include hazardous location certifications?\u003c\/p\u003e\n\u003cp\u003eNo, the agency approval option is set to 00, indicating that hazardous area certifications are not included with this unit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the permissible operating temperature range at the probe tip?\u003c\/p\u003e\n\u003cp\u003eThe assembly is rated for continuous operation in environments ranging from -51 deg C to +177 deg C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow is static gap voltage verified during system commissioning?\u003c\/p\u003e\n\u003cp\u003eA digital voltmeter is connected across the monitor output terminals to measure the static DC voltage against the -10 VDC target.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this probe be interchanged with non-XL 3300 series components?\u003c\/p\u003e\n\u003cp\u003eYes, the 3300 XL system provides backward compatibility and electrical interchangeability with older 5 mm and 8 mm system components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat target material is required for accurate calibration scaling?\u003c\/p\u003e\n\u003cp\u003eFactory linear scaling assumes standard AISI 4140 alloy steel; alternative metallic materials require specific calibration correction offsets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the primary cause of sudden signal loss during operation?\u003c\/p\u003e\n\u003cp\u003eMoisture contamination inside the coaxial connector or mechanical damage to the outer fluorocarbon insulation layer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhy is an unthreaded length specified on the probe casing?\u003c\/p\u003e\n\u003cp\u003eThe unthreaded section allows precise mechanical positioning and depth adjustment through mounting brackets and adapter sleeves.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46025264136365,"sku":"330104-05-12-10-02-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian10_ae71359b-4603-424b-8873-cc531535aaa5.jpg?v=1783581966","url":"https:\/\/www.maxwellplc.com\/ru\/products\/330104-05-12-10-02-00-bently-nevada-3300-xl-proximity-probes","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}