{"product_id":"330104-00-08-10-02-00-bently-nevada-3300-xl-proximity-probe","title":"330104-00-08-10-02-00 Bently Nevada 3300 XL Proximity Probe","description":"\u003cp\u003e\u003cspan class=\"citation-59\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003eBently Nevada 330104-00-08-10-02-00\u003c\/strong\u003e\u003cspan class=\"citation-59\"\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003cspan class=\"citation-59 citation-end-59\"\u003e\u003cspan\u003e \u003c\/span\u003e3300 XL 8 mm Proximity Probe, operates as a dedicated hardware component for non-contact vibration and position measurements within rotating machinery monitoring platforms.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Configuration Matrix\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"citation-58 citation-end-58\"\u003eThe 330104 model is an 8 mm eddy-current proximity transducer featuring an M10 x 1 threaded case configuration.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe specific part number\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330104-00-08-10-02-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebreaks down as follows:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Unthreaded Length (0.0 inches).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan class=\"citation-57\"\u003e\u003c\/span\u003e\u003cstrong\u003e08\u003c\/strong\u003e\u003cspan class=\"citation-57 citation-end-57\"\u003e: Overall Case Length (0.8 inches).\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan class=\"citation-56\"\u003e\u003c\/span\u003e\u003cstrong\u003e10\u003c\/strong\u003e\u003cspan class=\"citation-56 citation-end-56\"\u003e: Total Length (1.0 meter).\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan class=\"citation-55\"\u003e\u003c\/span\u003e\u003cstrong\u003e02\u003c\/strong\u003e\u003cspan class=\"citation-55 citation-end-55\"\u003e: Connector Option (Miniature coaxial ClickLoc connector, standard cable).\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Agency Approval (No hazardous area approvals).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330104-00-08-10-02-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e~0.29 kg (varies with cable length)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm (80 mils)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eScale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTip Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8.0 mm nominal\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMachinery Monitoring \u0026amp; TSI Integration\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"citation-54 citation-end-54\"\u003eThe 330104 probe projects a high-frequency radio frequency field from its 8.0 mm tip to interact with the target shaft.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"citation-53 citation-end-53\"\u003eThis displacement data is routed to a Proximitor sensor, which generates a voltage signal proportional to the gap distance.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eFor accurate rotor dynamics monitoring, strict gap voltage validation (typically targeting -10 VDC at the monitor) is required. The system utilizes AISI 4140 steel as the calibration target; deviation from this target material requires laboratory recalibration or software offset compensation to maintain the 7.87 V\/mm scale factor. Proper installation requires adherence to counterbore clearance boundaries (minimum 31.8 mm) to ensure cross-talk suppression and eliminate side-viewing interference.\u003c\/p\u003e\n\u003ch3\u003eOrdering info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 x 330104-00-08-10-02-00 Proximity Probe\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x M10 x 1 stainless steel hex alignment locking nuts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Set of silicone connector protective boots\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eMechanical Torque:\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-52 citation-end-52\"\u003eDo not exceed 13.5 N·m (120 in-lb) when locking the probe into position.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eExcessive torque can cause structural separation of the probe tip from the case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCabling:\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-51 citation-end-51\"\u003eUse dedicated, grounded metal conduits to house coaxial cable lines to minimize electromagnetic noise and interference.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConnector Handling:\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-50 citation-end-50\"\u003eThe ClickLoc connectors require finger-tight torque.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eA \"click\" sound indicates proper seating; do not overtighten with pliers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnvironmental Protection:\u003c\/p\u003e\n\u003cp\u003eEnsure the probe tip remains below 177 deg C for standard applications. For higher temperature environments, utilize ETR (Extended Temperature Range) components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eCan this probe measure both vibration and position?\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-49 citation-end-49\"\u003eYes, the eddy-current principle allows the system to measure both static shaft position and dynamic vibration signals simultaneously.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs this probe interchangeable with older 3300 8 mm components?\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-48 citation-end-48\"\u003eYes, 3300 XL components are designed to be electrically and physically interchangeable with previous 3300 8 mm transducer systems.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat happens if the gap voltage is outside the linear range?\u003c\/p\u003e\n\u003cp\u003eOperation outside the linear range (typically –1 to –17 VDC) will result in signal clipping, inaccurate vibration data, or monitoring system faults.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes this probe require matching with its extension cable?\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-47 citation-end-47\"\u003eThe 3300 XL system is designed for full component interchangeability.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"citation-46 citation-end-46\"\u003eYou do not need to bench-calibrate individual components as a system.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the recommended gap setting?\u003c\/p\u003e\n\u003cp\u003eThe standard recommended gap setting is 1.27 mm (50 mils) to maintain the probe within the center of its 2.0 mm linear range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the connector waterproof?\u003c\/p\u003e\n\u003cp\u003eThe ClickLoc connectors are corrosion-resistant and provide a robust seal, but they are not intended for direct submersion in oil or water without appropriate protective boots.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhy is the target material important?\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"citation-45 citation-end-45\"\u003eThe eddy-current calibration is specific to AISI 4140 steel.\u003csup class=\"superscript\"\u003e\u003c\/sup\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eOther conductive materials will alter the permeability of the target, shifting the scale factor significantly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this be installed in a hazardous area?\u003c\/p\u003e\n\u003cp\u003eThis specific part number (ending in -00) does not include hazardous area approvals. Always confirm if your site installation requires Ex-rated (hazardous area) certified equipment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518820343981,"sku":"330104-00-08-10-02-00","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330104-00-08-10-02-00-3300xl-8-mm-proximity-probes-2nuz0gru0yr.jpg?v=1766979516","url":"https:\/\/www.maxwellplc.com\/ru\/products\/330104-00-08-10-02-00-bently-nevada-3300-xl-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}