{"product_id":"330104-00-03-10-01-00-bently-nevada-3300-xl-proximity-probe","title":"330104-00-03-10-01-00 Bently Nevada 3300 XL Proximity Probe","description":"\u003cp\u003eConfigured for non-contacting shaft displacement and vibration tracking in 3300 system networks, the \u003cstrong\u003eBently Nevada 330104-00-03-10-01-00\u003c\/strong\u003e (\u003cstrong\u003e330104\u003c\/strong\u003e Proximity Probe) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eMechanical Configuration Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330104\u003c\/strong\u003e: 3300 XL 8 mm proximity probe assembly with integrated armor cladding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Sets a 0 mm unthreaded housing profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e03\u003c\/strong\u003e: Designates a 30 mm overall threaded case length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\u003c\/strong\u003e: Specifies a total physical cable length of 1.0 meter (3.3 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e01\u003c\/strong\u003e: Equips a miniature coaxial ClickLoc connector coupled with a pre-installed connector protector on standard cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e00\u003c\/strong\u003e: Denotes that hazardous area agency approvals are not required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Parameters\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330104-00-03-10-01-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.08 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e2 x 1.5 x 58 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 to +177 deg C operating envelope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor driven via high-frequency RF excitation from external Proximitor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Profile\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 metric thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor Option\u003c\/td\u003e\n\u003ctd\u003eFlexible stainless steel armored conduit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Cable Length\u003c\/td\u003e\n\u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Signal Scaling \u0026amp; Cross-Talk Suppression\u003c\/h3\u003e\n\u003cp\u003eThe 8 mm sensing element relies on automated eddy-current probe scaling matrices to linearize raw voltage output variations over the physical gap distance. When positioned inside heavy machinery housings, the geometric design maintains high cross-talk suppression between adjacent sensor channels, ensuring valid rotor dynamics capturing under high vibration frequencies without signal bleeding.\u003c\/p\u003e\n\u003ch3\u003eLogistics Packaging Bill\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330104-00-03-10-01-00 3300 XL 8 mm Proximity Probe with Armor\u003c\/li\u003e\n\u003cli\u003e1 x Coaxial Connector Protector Sleeve Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Installation Controls\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Insertion \u0026amp; Locking\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eScrew the M10 x 1 threaded body into the prepared casing bracket manually to prevent cross-threading.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum of 5 full thread engagements within the mounting bracket to secure the assembly against structural vibrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit Routing Constraints\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRoute the armored cable profile through fixed pathways away from active high-voltage lines.\u003c\/li\u003e\n\u003cli\u003eEnforce a minimum bending radius limit of 25.4 mm (1.0 in) along all physical curves to protect internal lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Transducer FAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat standard gap voltage validation value is required during nominal static mechanical calibration?\u003c\/p\u003e\n\u003cp\u003eThe industrial monitor setup targets a default gap voltage validation of -10 VDC at the geometric midpoint of the linear tracking range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does the integrated armor sleeve layer affect the minimum bending radius of the transducer cable?\u003c\/p\u003e\n\u003cp\u003eThe stainless steel armor limits the minimum continuous bending curve profile to exactly 25.4 mm (1.0 in) to prevent internal coaxial kinking.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this 1.0 meter probe loop function properly if wired directly to a 9.0 meters Proximitor sensor?\u003c\/p\u003e\n\u003cp\u003eNo, the total electrical length of the probe and extension cable must match the specific calibration requirements of the Proximitor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat operational error occurs if moisture penetrates past the miniature coaxial ClickLoc connector interfaces?\u003c\/p\u003e\n\u003cp\u003eMoisture entry disrupts loop impedance profiles, corrupts the eddy-current probe scaling curve, and triggers false high vibration alarms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs separate external cooling media required if the probe tip operates continuously near high-speed turbine shafts?\u003c\/p\u003e\n\u003cp\u003eNo, the internal components utilize passive insulation materials rated to withstand continuous processing temperatures up to +177 deg C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat physical fault status appears if the target shaft moves completely outside the calibrated linear zone?\u003c\/p\u003e\n\u003cp\u003eThe driver loop changes state to a maximum saturation voltage, inducing a transducer fault state flag inside the processing TSI rack.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the unthreaded length selection of 0 mm modify the overall torque limits of the M10 case?\u003c\/p\u003e\n\u003cp\u003eNo, the full threading allows flexible depth setting but standard metric torque limits apply across the full length of the case thread.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the connector protector module be uninstalled from the cable assembly during field routing?\u003c\/p\u003e\n\u003cp\u003eThe connector protector is integrated onto the ClickLoc terminal to isolate the junction loop from ground contact with the machine frame.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":46026655498413,"sku":"330104-00-03-10-01-00","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/xian_3_d97a02de-3dd6-47c4-95f6-0b5284bba3ba.jpg?v=1780476694","url":"https:\/\/www.maxwellplc.com\/ru\/products\/330104-00-03-10-01-00-bently-nevada-3300-xl-proximity-probe","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}