Configured for ControlNet communication within the ABB AC 250 platform, the ABB 200-CICN 492897801 (200-CICN Communication Interface Module) provides the hardware interface required for ControlNet network connectivity.

Model Identification

The supplied identification data lists 200-CICN as a Communication Interface Module for ControlNet. The spare model is 492897801. No additional suffix decoding is specified in the available data.

Hardware Specifications

ControlNet Communication Interface

The 200-CICN provides the physical communication interface for ControlNet network operation within the specified ABB AC 250 system. Its function is network communication rather than direct analog or discrete field signal processing.

ControlNet installations require appropriate network cabling, connectors, termination, and network configuration. The supplied data does not specify communication speed, connector type, node limits, current consumption, or firmware requirements, so these values should be taken from the applicable ABB system documentation.

Ordering Information

• 1 x ABB 200-CICN Communication Interface Module
• Part Number: 492897801
• 1 x Communication interface module assembly
• No separate cable, connector, termination component, or mounting kit is specified in the supplied product information.

Installation and Wiring

Module installation

• Confirm the target controller or chassis is compatible with the AC 250 system before installation.
• Verify the module identification and spare model against the system configuration.
• Install the module according to the mechanical orientation and retention method specified for the host assembly.

Network wiring

• Use the ControlNet cable and connector type specified by the system documentation.
• Keep communication wiring separated from high-current power conductors where practical.
• Avoid sharp bends, excessive mechanical tension, and unnecessary cable loops.
• Maintain the prescribed network topology and termination arrangement.

Grounding and shielding

• Follow the cabinet grounding scheme specified for the AC 250 installation.
• Terminate cable shields according to the ControlNet installation requirements.
• Avoid creating unintended ground loops through communication cable shields.
• Keep communication cable routing away from switching power conductors where possible.

Commissioning

• Verify connector seating and cable continuity before energizing the system.
• Confirm the communication interface is recognized by the host system.
• Check network status indications and controller diagnostics after installation.
• Do not change firmware or network parameters without confirming compatibility with the installed system revision.

Frequently Asked Questions

• What is the function of the 200-CICN?

  The 200-CICN is identified as a ControlNet communication interface module for the ABB AC 250 system. It provides the hardware interface for network communication.

• What is the spare model number?

  The supplied spare model number is 492897801. This identifier should be checked against the existing module before hardware replacement.

• Does the 200-CICN provide digital I/O channels?

  No digital I/O channel count is specified for this module. Its supplied product description identifies it as a ControlNet communication interface.

• What network does the module support?

  The supplied data identifies ControlNet as the supported communication network. Other protocols should not be assumed without corresponding ABB documentation.

• Is the power consumption specified?

  No power consumption value is included in the supplied technical information. The applicable AC 250 system documentation should be used for power budgeting.

• Can the communication cable share a power cable route?

  Communication wiring should preferably be separated from high-current power conductors. This reduces the possibility of electromagnetic interference affecting network communication.

• Does the module require a specific firmware revision?

  No firmware compatibility information is provided. Before replacement, compare the installed system revision and applicable ABB documentation with the replacement module.

• Is hot swapping supported?

  Hot-swap capability is not specified in the supplied information. The module should not be removed or installed under power unless the applicable AC 250 documentation explicitly permits it.