{"product_id":"yokogawa-eb501-10-er-bus-interface-slave-module","title":"Yokogawa EB501-10 ER Bus Interface Slave Module","description":"\u003cp\u003eThe \u003cstrong\u003eYokogawa EB501-10\u003c\/strong\u003e is an ER Bus Interface Slave Module installed in a remote node of a Yokogawa Field Network I\/O (FIO) system. It communicates with an \u003cstrong\u003eEB401 ER Bus Interface Master Module\u003c\/strong\u003e in the local node or Field Control Unit, providing the ER Bus connection between the control station and remote I\/O node.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eModel Configuration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEB501:\u003c\/strong\u003e ER Bus Interface Slave Module for installation in a remote node.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-10:\u003c\/strong\u003e Complete model code supplied for this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe supplied model-code interpretation identifies the -1 portion as the standard type without explosion protection and 0 as the basic type. These suffix meanings should be checked against the ordering-code documentation for the exact hardware revision before procurement.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eHardware Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEB501-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eER Bus Interface Slave Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eYokogawa FIO \/ CENTUM DCS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Function\u003c\/td\u003e\n\u003ctd\u003eER Bus slave interface for remote nodes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Layer Interface\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3 10BASE-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Port\u003c\/td\u003e\n\u003ctd\u003e1 coaxial port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eBNC coaxial connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Speed\u003c\/td\u003e\n\u003ctd\u003e10 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Transmission Distance\u003c\/td\u003e\n\u003ctd\u003e185 m per segment with specified YCB141 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Consumption\u003c\/td\u003e\n\u003ctd\u003e0.7 A, as supplied; confirm against the exact module documentation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.3 kg, as supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e\u003cstrong\u003eER Bus Communication and Remote Node Function\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe EB501 operates on the remote-node side of the Yokogawa ER Bus architecture. It communicates with an EB401 master module installed in a local node or supported Field Control Unit.\u003c\/p\u003e\n\u003cp\u003eThe module provides one 10BASE-2 coaxial interface. Its BNC connection forms part of the ER Bus link between the local and remote nodes.\u003c\/p\u003e\n\u003cp\u003eFor a dual-redundant bus arrangement, two EB501 modules can be installed in the remote node. Each module serves a separate bus path, subject to the system configuration and applicable Yokogawa installation requirements.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and Electrical Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe EB501 is designed for installation in a compatible ER Bus Node Unit, including the ANR10S and ANR10D node configurations.\u003c\/p\u003e\n\u003cp\u003eBefore installation, verify the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that the node unit supports the EB501 module and the intended system configuration.\u003c\/li\u003e\n\u003cli\u003eCheck the module model code and hardware revision against the system configuration records.\u003c\/li\u003e\n\u003cli\u003eUse the specified coaxial cable and compatible BNC connections for the ER Bus.\u003c\/li\u003e\n\u003cli\u003eFor 10BASE-2 cabling, follow the system's documented bus topology and termination requirements.\u003c\/li\u003e\n\u003cli\u003eIn dual-redundant configurations, keep the two bus paths correctly identified and separated as required by the installation design.\u003c\/li\u003e\n\u003cli\u003eIsolate equipment as required by the applicable maintenance procedure before inserting, removing, or wiring modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not infer hot-swap capability from the module's plug-in form factor. Follow the Yokogawa hardware and maintenance instructions for the specific node unit.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e- Q: What is the function of the Yokogawa EB501-10?\u003c\/p\u003e\n\u003cp\u003eA: It is an ER Bus Interface Slave Module installed in a remote node to communicate with an EB401 master module on the local-node side.\u003c\/p\u003e\n\u003cp\u003e- Q: Which module communicates with the EB501?\u003c\/p\u003e\n\u003cp\u003eA: The EB501 communicates with the EB401 ER Bus Interface Master Module installed in a compatible local node or Field Control Unit.\u003c\/p\u003e\n\u003cp\u003e- Q: What communication interface does the EB501 use?\u003c\/p\u003e\n\u003cp\u003eA: The EB501 uses a 10BASE-2 coaxial interface with a BNC connector.\u003c\/p\u003e\n\u003cp\u003e- Q: How many communication ports are provided?\u003c\/p\u003e\n\u003cp\u003eA: The EB501 has one ER Bus coaxial port. Dual-redundant operation uses two EB501 modules.\u003c\/p\u003e\n\u003cp\u003e- Q: Can the EB501 be used in an ANR10D node?\u003c\/p\u003e\n\u003cp\u003eA: Yokogawa documentation identifies the EB501 as the ER Bus slave module for remote nodes, including ANR10S and ANR10D configurations.\u003c\/p\u003e\n\u003cp\u003e- Q: What cable is used for the ER Bus connection?\u003c\/p\u003e\n\u003cp\u003eA: The supplied information identifies YCB141 coaxial cable. Confirm cable and termination requirements against the applicable Yokogawa system documentation.\u003c\/p\u003e\n\u003cp\u003e- Q: Does the EB501 support dual-redundant communication?\u003c\/p\u003e\n\u003cp\u003eA: Yes. Yokogawa documentation describes dual-redundant ER Bus operation using two EB501 modules in the remote node.\u003c\/p\u003e\n\u003cp\u003e- Q: Can the EB501 be installed in place of an EB401?\u003c\/p\u003e\n\u003cp\u003eA: No. The EB501 is the remote-node slave interface, while the EB401 is the local-node master interface. They have different system roles.\u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":68368069689517,"sku":"EB501-10","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/EB501-10-1.jpg?v=1795083945","url":"https:\/\/www.maxwellplc.com\/products\/yokogawa-eb501-10-er-bus-interface-slave-module","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}