{"product_id":"sc610-3bse001552r1-abb-sub-carrier-module-advant-controller-100-series","title":"SC610 3BSE001552R1 ABB Sub-Carrier Module Advant Controller 100 Series","description":"\u003cp\u003eConfigured for signal routing and module bus interconnection in Advant Controller 100 Series systems, the \u003cstrong\u003eABB SC610 3BSE001552R1\u003c\/strong\u003e (\u003cstrong\u003eSC610\u003c\/strong\u003e Sub-Carrier Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003ePart Number Breakdown \u0026amp; System Designation\u003c\/h3\u003e\n\u003cp\u003eThe internal hardware designation defines physical board layout and system routing functions within the subrack:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSC610\u003c\/strong\u003e: Core module identifier for the Advant Controller 100 series sub-carrier interface board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3BSE001552R1\u003c\/strong\u003e: Commercial spare part number mapping to the specific printed circuit assembly revision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBIOB\u003c\/strong\u003e: Bus I\/O Board mechanical carrier format used for subrack slot routing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical \u0026amp; Environmental Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSC610 (3BSE001552R1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden \/ Poland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e27.9 cm x 5.1 cm x 27.9 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive carrier board (Bus driven)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubmodule System\u003c\/td\u003e\n\u003ctd\u003eAdvant Controller 100 Series (AC110\/AC160)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Type\u003c\/td\u003e\n\u003ctd\u003eSub-carrier \/ Carrier board module (BIOB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHarmonized Tariff Code\u003c\/td\u003e\n\u003ctd\u003e85389091\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Architecture \u0026amp; Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe carrier module provides physical signal tracing to scale I\/O density across the controller subrack without introducing signal attenuation. Its multi-layer backplane trace layout maintains high backplane bus communication velocity and supports firmware flash compatibility across attached process interface modules, ensuring synchronization across internal bus channels.\u003c\/p\u003e\n\u003ch3\u003eDelivery Package \u0026amp; Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ABB SC610 Sub-Carrier Board Module (3BSE001552R1)\u003c\/li\u003e\n\u003cli\u003e2 x Subrack mounting retention screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubrack Power Isolation\u003c\/strong\u003e: De-energize all 24 VDC subrack power supplies prior to inserting or seating the module into the backplane frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Alignment\u003c\/strong\u003e: Align board guide rails with the chassis card cage slots; push evenly on the front panel edges until rear multi-pin DIN connectors seat fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Rules\u003c\/strong\u003e: Handle the assembly strictly using an antistatic wrist strap connected to cabinet earth ground to prevent static discharge to exposed signal traces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit Separation\u003c\/strong\u003e: Ensure field cables attached to carrier termination blocks are kept physically separated from high-voltage AC distribution wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the SC610 sub-carrier module require independent power wiring?\u003c\/p\u003e\n\u003cp\u003eNo, the unit functions as a passive electrical carrier board, drawing logical signal paths directly from the active backplane bus connection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs hot-swapping supported for this module during active PLC operation?\u003c\/p\u003e\n\u003cp\u003eNo, replacing the carrier board requires removing backplane power to prevent electrical arcing and logic disruption across connected modules.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does the module handle signal routing between attached submodules?\u003c\/p\u003e\n\u003cp\u003eInternal printed circuit traces link the front-facing submodule connectors directly to the rear system bus interface without active signal conversion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat causes bus communication faults when installing replacement carrier boards?\u003c\/p\u003e\n\u003cp\u003eFaults typically stem from bent backplane connector pins or improper seating inside the rack guide channels during hardware insertion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the carrier board contain non-volatile memory or configuration firmware?\u003c\/p\u003e\n\u003cp\u003eNo, the unit contains no firmware memory flash components and requires no software parameter downloading upon hardware replacement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat physical mounting format is used for fixing the module in the chassis?\u003c\/p\u003e\n\u003cp\u003eThe board slides into dedicated subrack slots and secures using captive retention screws on the card front plate assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow should shield wiring be terminated on the carrier board terminals?\u003c\/p\u003e\n\u003cp\u003eField signal cable shields must be grounded at the central cabinet ground bar before terminating raw signal conductors at the module connector interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the SC610 board be used in AC70 or AC80 racks?\u003c\/p\u003e\n\u003cp\u003eNo, the physical layout and backplane pin assignments are engineered specifically for Advant Controller 100 Series platforms (AC110\/AC160).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":46021131600045,"sku":"SC610","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/SC6103BSE001552R1_3.jpg?v=1788327863","url":"https:\/\/www.maxwellplc.com\/products\/sc610-3bse001552r1-abb-sub-carrier-module-advant-controller-100-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}