{"product_id":"pharps11000000-abb-power-supply-module-infi-90","title":"PHARPS11000000 ABB Power Supply Module Infi 90","description":"\u003cp\u003eThe \u003cstrong\u003eABB PHARPS11000000\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003ePHARPS11000000\u003c\/strong\u003e Power Supply Module, operates as a dedicated hardware component for regulated DC power conversion and system bus distribution within Bailey Infi 90 Modular Power System III platforms.\u003c\/p\u003e\n\u003ch3\u003eModel Number Decoding\u003c\/h3\u003e\n\u003cp\u003eThe PHARPS11000000 represents the base power assembly under the Modular Power System III (MPS III) series. The alphanumeric suffix structure designates internal component revisions and voltage bus distribution settings required to power rack-mounted controller chassis and auxiliary process I\/O sub-assemblies.\u003c\/p\u003e\n\u003ch3\u003eTechnical Performance Matrix\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePHARPS11000000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e21.6 x 8.9 x 44.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12.5 W continuous output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e115\/230 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current\u003c\/td\u003e\n\u003ctd\u003e2.5 A continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHoldup Time\u003c\/td\u003e\n\u003ctd\u003e\u0026gt; 15 ms at full load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInrush Current\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 20 A (at 230 V AC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRipple \u0026amp; Noise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 100 mV peak-to-peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eConvection cooled (no fan)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e5 to 95% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eSystem Power Distribution and Backplane Interface\u003c\/h3\u003e\n\u003cp\u003eThe power supply module regulates main AC input power down to regulated system voltages to sustain internal rack card execution without affecting backplane bus communication velocity. Onboard filtering circuits suppress electrical line noise to ensure maximum I\/O density scaling stability while maintaining complete firmware flash compatibility across active processing nodes.\u003c\/p\u003e\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ABB PHARPS11000000 Power Supply Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMechanical Installation and Electrical Grounding\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify proper AC input voltage jumper configuration (115 V AC or 230 V AC) prior to energizing the module.\u003c\/li\u003e\n\u003cli\u003eSlide the module along cabinet guide tracks until the rear power connectors engage firmly into the system backplane.\u003c\/li\u003e\n\u003cli\u003eEnsure the chassis ground terminal is bonded directly to the primary cabinet copper earth bus.\u003c\/li\u003e\n\u003cli\u003eMaintain adequate vertical convection clearance above and below the module chassis to prevent thermal buildup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineering FAQ\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWhat AC input line voltages are supported by the PHARPS11000000?\u003c\/p\u003e\n\u003cp\u003eThe module accepts standard dual input voltage ratings of 115 V AC or 230 V AC single-phase power.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the primary regulated DC voltage output and current rating?\u003c\/p\u003e\n\u003cp\u003eThe unit provides a regulated 5 V DC output rated for 2.5 A continuous load current (12.5 W).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the minimum holdup time during an AC power loss event?\u003c\/p\u003e\n\u003cp\u003eThe power supply maintains continuous output regulation for greater than 15 ms at full load during power interruptions.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat maximum inrush current is drawn when applying 230 V AC power?\u003c\/p\u003e\n\u003cp\u003eThe internal soft-start circuitry limits total peak inrush current to less than 20 A at 230 V AC startup.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the PHARPS11000000 module require active cooling fans?\u003c\/p\u003e\n\u003cp\u003eNo, the hardware uses natural convection cooling and contains no internal moving fan components.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat peak-to-peak ripple and noise limits are specified for the DC output?\u003c\/p\u003e\n\u003cp\u003eThe DC output voltage ripple and noise level is filtered to remain below 100 mV peak-to-peak.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan the power supply module be replaced while the rack is fully energized?\u003c\/p\u003e\n\u003cp\u003eSystem power must be turned off prior to inserting or removing the power supply from the backplane assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the operating temperature range for panel installations?\u003c\/p\u003e\n\u003cp\u003eThe unit operates continuously within ambient enclosure temperatures ranging from 0 to +60 deg C.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":46021112627373,"sku":"PHARPS11000000","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/PHARPS11000000_1.jpg?v=1789278239","url":"https:\/\/www.maxwellplc.com\/products\/pharps11000000-abb-power-supply-module-infi-90","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}