{"product_id":"nkls03-10-abb-termination-loop-cable-bailey-net-90-infi-90-series","title":"NKLS03-10 ABB Termination Loop Cable Bailey Net 90 \/ Infi 90 Series","description":"\u003cp\u003eThe \u003cstrong\u003eABB NKLS03-10\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eNKLS03\u003c\/strong\u003e Termination Loop Cable, operates as a dedicated hardware component for termination unit interconnectivity and loop signal transfer within Bailey Net 90 and Infi 90 DCS architectures.\u003c\/p\u003e\n\u003ch3\u003eCable Length Code \u0026amp; Assembly Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNKLS03\u003c\/strong\u003e: Base designator for pre-formed multi-conductor termination loop cable assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-10\u003c\/strong\u003e: Cable length designation specifying a factory-terminated assembly length of 10 feet (3.05 meters).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComponent Parameters\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eNKLS03-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSweden\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Dimensions\u003c\/td\u003e\n\u003ctd\u003e33.0 x 7.6 x 33.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +80 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component (N\/A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e10 feet (3.05 meters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor Gauge\u003c\/td\u003e\n\u003ctd\u003e22-24 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd\u003e300 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd\u003e2 A per conductor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharacteristic Impedance\u003c\/td\u003e\n\u003ctd\u003e100-120 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eSystem Connectivity \u0026amp; Bus Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe cable maintains signal integrity across high-density I\/O routing networks by matching the 100-120 Ω characteristic impedance required by Infi 90 termination modules. Preserving fixed impedance profiles minimizes signal reflection and attenuates high-frequency noise spikes during rapid backplane bus communication velocity transitions. The conductor structure ensures low attenuation along the 10-foot run, supporting reliable real-time process control data transport.\u003c\/p\u003e\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ABB NKLS03-10 Termination Loop Cable Assembly (10 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Wiring \u0026amp; Cable Routing Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBending Radius Constraints\u003c\/strong\u003e: Maintain a minimum bend radius of 4 times the outer cable diameter during installation to prevent internal conductor deformation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Isolation Practices\u003c\/strong\u003e: Route the termination loop cable inside grounded metallic conduit or dedicated low-voltage cable trays, keeping parallel runs away from 480 VAC power lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Engagement\u003c\/strong\u003e: Fully seat the end connectors onto the termination module header pins and secure all latching screws to guarantee continuous shield continuity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCan the NKLS03-10 cable be hot-swapped while the DCS termination unit is energized?\u003c\/p\u003e\n\u003cp\u003eYes, passive loop cables can be disconnected and reattached under power provided connected I\/O circuits do not drive inductive loads without suppression.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDoes the cable assembly include integral shielding against electromagnetic noise?\u003c\/p\u003e\n\u003cp\u003eYes, the cable construction incorporates overall shielding designed to maintain high signal integrity in noisy industrial environments.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat is the maximum current capacity per conductor for the NKLS03-10 assembly?\u003c\/p\u003e\n\u003cp\u003eEach 22-24 AWG conductor inside the cable assembly is rated to carry up to 2 A continuous current at standard operating temperatures.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHow does characteristic impedance matching benefit the termination loop?\u003c\/p\u003e\n\u003cp\u003eMatching the 100-120 Ω impedance prevents signal degradation and standing wave reflections over the 10-foot communication length.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat installation precaution prevents mechanical strain on the cable connectors?\u003c\/p\u003e\n\u003cp\u003eSecure the cable with strain-relief ties within 15 cm of the module connector to avoid pulling force on the header pin joints.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIs the NKLS03-10 suitable for outdoor installation without protective conduit?\u003c\/p\u003e\n\u003cp\u003eNo, the outer jacket is designed for cabinet and tray routing; exposed outdoor applications require UV-resistant sealed conduit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWhat occurs if the cable operating temperature exceeds +80 deg C?\u003c\/p\u003e\n\u003cp\u003eExceeding +80 deg C can degrade insulation dielectric properties, causing potential signal cross-talk or jacket hardening over time.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan this cable assembly be spliced to extend its overall physical length?\u003c\/p\u003e\n\u003cp\u003eSplicing is not recommended as it disrupts characteristic impedance matching, introduces noise, and voids bus signal transmission guarantees.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":46021113053357,"sku":"NKLS03-10","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/v13-w-5m-pur_1.jpg?v=1789090748","url":"https:\/\/www.maxwellplc.com\/products\/nkls03-10-abb-termination-loop-cable-bailey-net-90-infi-90-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}