{"product_id":"ic220pbi002-ge-fanuc-versapoint-profibus-dp-network-interface-module","title":"IC220PBI002 GE Fanuc VersaPoint PROFIBUS-DP Network Interface Module","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe GE Fanuc IC220PBI002 is a PROFIBUS-DP network interface module for the VersaPoint distributed I\/O platform. It is used to connect a VersaPoint I\/O station to a PROFIBUS-DP control network as a slave device, enabling cyclic I\/O exchange between a PROFIBUS master and the installed VersaPoint modules on the local bus.\u003c\/p\u003e\n\u003cp\u003eDesigned for high-speed fieldbus environments, this interface supports PROFIBUS communication rates up to 12 Mbit\/s and can map station I\/O data for deterministic control. Configuration is performed using onboard addressing and parameter settings, allowing the station to be commissioned for typical PROFIBUS DP operation. The interface also supports DP\/V1 services for acyclic communication when used with compatible masters, supporting extended diagnostics and parameter access for supported modules.\u003c\/p\u003e\n\u003ch3\u003eHardware and Communication Parameters\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eModel \/ Order Number: IC220PBI002\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct Family: VersaPoint\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProduct Type: PROFIBUS-DP Network Interface Module\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFieldbus Protocol: PROFIBUS-DP, supports DP\/V1 services\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNetwork Data Rate: Up to 12 Mbit\/s\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStation Role: PROFIBUS-DP slave for VersaPoint I\/O station\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI\/O Data Capacity per Station: Up to 176 bytes input and 176 bytes output, configuration dependent\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAddressing: Assignable station ID via DIP switch settings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupported Expansion: Up to 63 VersaPoint modules on the local bus, configuration dependent\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePower Input: 24 VDC nominal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOperating Voltage Range: 19.2 to 30 VDC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaximum Input Current: Up to 8 A, system wiring and station load dependent\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLocal Bus UA Current: 500 mA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRequired Terminal Base: IC220TBK087 terminal strip, 10 connection points\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIndicators and Controls: Status LEDs and DIP switches for setup and diagnostics\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFirmware Upgrades: Not supported on this model\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCondition: Brand New\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAvailability: In Stock\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCountry of Origin: USA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWeight: 0.06 kg\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDimensions: 1.3 × 7 × 12 cm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHS Code: 8537101190\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMinimum Order Quantity: 1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLifecycle Status: Active\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIndustrial Application Scenarios\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eConnecting VersaPoint remote I\/O islands to PROFIBUS-DP PLC and DCS systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDistributed machine I\/O where deterministic fieldbus timing is required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRetrofit projects standardizing on PROFIBUS-DP networks while expanding modular I\/O\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePackaging, material handling, and assembly lines using PROFIBUS masters and remote stations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI\/O stations requiring DP\/V1 diagnostic and acyclic access through compatible master tools\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":45519044280493,"sku":"IC220PBI002","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/ge-fanuc-ic220pbi002-dp-network-interface-module-s4qkfchslww.jpg?v=1766985678","url":"https:\/\/www.maxwellplc.com\/products\/ic220pbi002-ge-fanuc-versapoint-profibus-dp-network-interface-module","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}