{"product_id":"bently-nevada-40180-02-connector-protector-kit-for-vibration-sensors","title":"Bently Nevada 40180-02 Connector Protector Kit for Vibration Sensors","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 40180-02 Connector Protector Kit provides a critical mechanical barrier for high-frequency coaxial interfaces used in mission-critical vibration monitoring systems. In environments characterized by heavy industrial vibration, dust ingress, and potential fluid exposure, these protectors preserve the electrical integrity of the connection between proximity probes and extension cables. By preventing mechanical strain and environmental degradation at the junction point, the kit ensures the signal path remains noise-free, which is essential for accurate data transmission to Bently Nevada 3500 racks and plant-wide DCS platforms. Engineering teams utilize these protectors as a standard best practice to extend the service life of sensor loops, reduce signal drift caused by intermittent contacts, and safeguard the diagnostic capabilities of turbine supervisory instrumentation in demanding industrial facilities.\u003c\/p\u003e\n\u003ch2\u003eCore Hardware Configuration\u003c\/h2\u003e\n\u003cp\u003eThe 40180-02 kit consists of rugged, precision-engineered shells designed to fully enclose mated coaxial connectors.\u003c\/p\u003e\n\u003ch3\u003eCompatibility Architecture\u003c\/h3\u003e\n\u003cp\u003eThis kit functions specifically with 75-ohm coaxial cabling systems typically found in eddy current proximity probe installations. The design accommodates both male and female connector ends, ensuring a comprehensive environmental seal across the entire junction.\u003c\/p\u003e\n\u003ch3\u003eQuantity and Packaging\u003c\/h3\u003e\n\u003cp\u003eEach package provides 10 complete pairs of protectors. This bulk volume supports large-scale plant maintenance projects, allowing technicians to standardize protection across multiple machine trains simultaneously.\u003c\/p\u003e\n\u003ch3\u003eMechanical Integrity\u003c\/h3\u003e\n\u003cp\u003eThe protectors establish a secure physical shield that mitigates cable fatigue and prevents unintentional decoupling. By isolating the connector interface, they eliminate the risk of short circuits or impedance variations caused by ambient industrial contaminants.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eFeature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eManufacturer\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada (Baker Hughes)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCountry of Origin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States of America\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eHS Tariff Code\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8537101190\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eKit Weight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.1 kg (0.22 lbs)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8.5 x 1.0 x 1.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eComponent Material\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHigh-density reinforced polymer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e75-ohm coaxial sensor cables\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eQuantity per Package\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e10 Pairs\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eEngineering Field Protocol\u003c\/h2\u003e\n\u003cp\u003eInstall the connector protectors immediately after mating the coaxial cables to ensure an effective seal against local environmental hazards. Ensure the threaded or locking interface of the connector is fully engaged before sliding the protector into position, as these units are designed to cover the external housing of the mated connection. Use self-fusing silicone tape in conjunction with these protectors if the application involves high humidity or direct chemical spray, providing a redundant layer of moisture resistance. Periodically inspect the protectors during annual plant outages to confirm the integrity of the shell remains intact and free from cracks or chemical warping.\u003c\/p\u003e\n\u003ch2\u003eOperational Reliability Advantages\u003c\/h2\u003e\n\u003cp\u003eThese protectors serve as the final line of defense against the harsh realities of plant-floor operation. By maintaining a constant physical environment around the connector, they prevent oxidation and galvanic corrosion from compromising the low-voltage signals required for shaft displacement monitoring.\u003c\/p\u003e\n\u003cp\u003eThis hardware integrates seamlessly into existing TSI (Turbine Supervisory Instrumentation) architectures. Whether maintaining legacy systems or commissioning new Honeywell Experion or Siemens S7 integrated monitoring solutions, the consistent use of 40180-02 protectors ensures that raw sensor data reaches the control room without the interference spikes or signal attenuation often introduced by compromised or corroded cable joints.\u003c\/p\u003e\n\u003ch2\u003eProcurement and Kit Contents\u003c\/h2\u003e\n\u003cp\u003e(1) Ten complete pairs of 40180-02 connector protector housings.\u003c\/p\u003e\n\u003cp\u003e(2) Factory-verified shielding components designed for standardized 75-ohm sensor cables.\u003c\/p\u003e\n\u003cp\u003e(3) Documentation certifying Bently Nevada original equipment quality.\u003c\/p\u003e\n\u003cp\u003e(4) Rugged, impact-resistant retail packaging suitable for inventory storage.\u003c\/p\u003e\n\u003ch2\u003eLogistic Dispatch and Handling\u003c\/h2\u003e\n\u003cp\u003eOur logistics team processes all orders within 2-7 days when payment finish protocols are confirmed. Shipments are handled through global express carriers like DHL, FEDEX, and UPS to ensure rapid arrival at your facility. Each kit is securely packed within anti-static industrial packaging to prevent damage during transit. This professional-grade containment ensures that every component reaches your site in pristine, factory-sealed condition, ready for immediate deployment in your critical machinery protection loops.\u003c\/p\u003e\n\u003ch2\u003eTechnical Support FAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Can these protectors be used on cables other than standard 75-ohm coaxial types?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA1: These protectors are specifically dimensioned for standard 75-ohm coaxial connectors used in Bently Nevada proximity probe systems; using them on significantly different cable diameters may prevent them from sealing properly and is not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Do these protectors provide a hermetic seal against water submersion?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA2: They are designed to provide robust mechanical and environmental protection against dust, vibration, and casual splash, but they are not intended for full-time underwater submersion without additional sealant tapes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: Why is it important to use 10 pairs as a set rather than individual units?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA3: Maintenance reliability increases when all cable junctions in a machine train are protected with uniform hardware; the 10-pair kit ensures that you have enough consistent components to secure an entire vibration monitoring loop from the probe to the transducer rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ4: Do these protectors interfere with the electrical shielding of the coaxial cable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA4: No, these protectors are constructed from non-conductive materials and provide purely mechanical and environmental shielding, ensuring they do not disrupt the ground path or the RF signal characteristics of the cable.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518882832557,"sku":"40180-02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-40180-02-connector-protector-ujlueaknwwy.jpg?v=1766980951","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-40180-02-connector-protector-kit-for-vibration-sensors","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}