{"product_id":"bently-nevada-330905-00-12-10-02-05-3300-nsv-proximity-probes","title":"Bently Nevada 330905-00-12-10-02-05 3300 NSv Proximity Probes","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330905-00-12-10-02-05\u003c\/strong\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3300 NSv\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probe, operates as a dedicated hardware component for non-contacting vibration and displacement measurements within the 3300 NSv Proximity Transducer System.\u003c\/p\u003e\n\u003ch3\u003eModel Matrix Breakdown\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330905\u003c\/strong\u003e: 3300 NSv Proximity Probe, 1\/4-28 UNF thread, without armor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Unthreaded Length option (0.0 in).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e12\u003c\/strong\u003e: Overall Case Length option (1.2 in).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e10\u003c\/strong\u003e: Total Length option (1.0 meter).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Connector option (Miniature coaxial ClickLoc connector, standard cable).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Agency Approval option (Multiple Options: CSA, ATEX, IECEx approvals for hazardous areas).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330905-00-12-10-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.15 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e15.0 cm x 15.0 cm x 5.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-35 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDetermined by Proximitor Sensor supply (Typically -24 VDC)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eProbe Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e5.0 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eThread Type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1\/4-28 UNF\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLinear Range\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e1.5 mm (60 mils), starting at approximately 0.25 mm (10 mils) from probe face\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eScale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm (200 mV\/mil) when paired with matching 3300 NSv Proximitor Sensor\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 3300 NSv Proximity Probe utilizes eddy-current technology optimized for tight clearance installations and small target diameters. Proper system operation requires gap voltage validation to ensure the probe operates within its linear range. A nominal gap voltage of -10 VDC targets the midpoint of the linear calibration curve when measuring standard AISI 4140 steel. Cross-talk suppression is integrated into the probe tip geometry to permit close mechanical mounting intervals without inductive interference from adjacent probes or structural components. The sensor dynamics allow precise tracking of high-frequency rotor vibrations and axial shaft positioning.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this 1.0-meter probe be extended directly using any standard extension cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The total electrical length of the probe and extension cable must match the required input length of the 3300 NSv Proximitor Sensor, which is typically 5.0 meters or 7.0 meters. Mismatching the total system length degrades the scale factor calibration.\u003c\/p\u003e\n\u003cp\u003eQ: What is the physical clearance required to prevent side-viewing cross-talk or false targets?\u003c\/p\u003e\n\u003cp\u003eA: The probe tip requires a minimum clear zone of counterbore diameter to prevent interference from surrounding metal. Maintaining a clearance of at least three times the probe tip diameter from adjacent conducting materials is standard engineering practice.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMechanical Torquing\u003c\/strong\u003e: When installing the 1\/4-28 UNF threaded case, do not exceed the maximum allowable torque of 3.4 N-m (30 in-lb) to prevent structural damage to the probe tip and case assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Connector Inspection\u003c\/strong\u003e: Ensure the ClickLoc coaxial connectors are clean and dry prior to mating. Do not use tools to tighten the connectors; hand-tighten until the tactile click is felt.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCable Routing and Shielding\u003c\/strong\u003e: Route the probe lead-in cable through dedicated conduit or cable trays. The coaxial outer shield must be isolated from structural ground along the run and terminated exclusively at the Proximitor Sensor housing ground terminal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThread Engagement\u003c\/strong\u003e: Ensure a minimum of five full threads of engagement into the mounting bracket or machine housing to guarantee structural stability against rotor dynamics and casing vibration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518870872237,"sku":"330905-00-12-10-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330905-00-12-10-02-05-3300-nsv-proximity-probes-sn5iitztmyx.jpg?v=1766980673","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330905-00-12-10-02-05-3300-nsv-proximity-probes","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}