{"product_id":"bently-nevada-330730-080-00-00-3300-xl-extension-cable","title":"Bently Nevada 330730-080-00-00 3300 XL Extension Cable","description":"\u003cp\u003eConfigured for high-frequency signal transmission in 3300 XL monitoring systems, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330730-080-00-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(\u003cstrong\u003e330730-080-00-00\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExtension Cable) provides direct physical electrical continuity between the proximity probe and the Proximitor sensor.\u003c\/p\u003e\n\u003ch3\u003eModel Suffix Decomposition\u003c\/h3\u003e\n\u003cp\u003eThe 330730-080-00-00 part number indicates the following hardware configuration:\u003c\/p\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e330730: 3300 XL Extension Cable assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e080: 8.0 meters total system length requirement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e00: Standard connector assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e00: No agency approval options.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330730-080-00-00\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUSA\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.42 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e350 mm x 350 mm x 80 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive Component\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eImpedance\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e75 Ohm Coaxial\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eRotor Dynamics and Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL system accuracy depends on maintaining a precise 75 Ohm impedance path across the transducer loop. Signal integrity is critical for rotor dynamics monitoring; thus, the cable must remain free of splices or abrupt bends that could cause reflections. Eddy-current probe scaling is directly affected by the total cable length, which must be calibrated in conjunction with the Proximitor sensor. Cross-talk suppression is maintained via the integrated coaxial shield, which should be properly routed away from high-current conductors to minimize inductive interference.\u003c\/p\u003e\n\u003ch3\u003eOrdering info\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e1 x 330730-080-00-00 Extension Cable assembly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x ClickLoc connector kit\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Protective connector cap\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Installation documentation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eHandling\u003c\/strong\u003e: Do not exceed the minimum bend radius of 25 mm to prevent impedance changes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e: Ensure ClickLoc connectors are clean and fully seated by hand; do not use pliers or tools to tighten.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRouting\u003c\/strong\u003e: Use shielded conduits where possible to reduce exposure to electromagnetic interference (EMI).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eGrounding\u003c\/strong\u003e: Terminate the cable shield at the monitoring system ground point to prevent ground loops that could introduce electrical noise.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can I splice this cable if it is too long?\u003c\/p\u003e\n\u003cp\u003eA: No. Splicing creates impedance discontinuities that distort the signal, resulting in errors in vibration measurement and phase data.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the purpose of the 75 Ohm impedance?\u003c\/p\u003e\n\u003cp\u003eA: This impedance is required to match the output of the probe and the input of the Proximitor sensor, ensuring maximum power transfer and signal clarity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Is this cable compatible with 3300 series legacy probes?\u003c\/p\u003e\n\u003cp\u003eA: No. This cable is specifically engineered for 3300 XL components and is not electrically or mechanically compatible with legacy systems.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How do I verify the cable is working properly?\u003c\/p\u003e\n\u003cp\u003eA: Use a high-impedance multimeter to check continuity of the center conductor and ensure the shield is not shorted to the signal wire.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Does the connector need to be lubricated?\u003c\/p\u003e\n\u003cp\u003eA: No. Lubricants can attract debris and degrade electrical contact; ensure the connector is clean and dry before mating.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: Can I install this in a high-vibration area?\u003c\/p\u003e\n\u003cp\u003eA: Yes, but the cable must be secured with clamps to prevent fatigue at the connector junction.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: What is the effect of the -10 VDC gap voltage target?\u003c\/p\u003e\n\u003cp\u003eA: Maintaining this gap voltage ensures the Proximitor operates in its linear range, which is mandatory for accurate displacement detection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQ: How does ambient temperature affect performance?\u003c\/p\u003e\n\u003cp\u003eA: The materials are rated for -51 deg C to +177 deg C, but avoid excessive mechanical stress on the cable jacket at the lower temperature limit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518766047405,"sku":"330730-080-00-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330730-080-00-00-extension-cable-irqeighbu3d.jpg?v=1766977090","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330730-080-00-00-3300-xl-extension-cable","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}