{"product_id":"bently-nevada-330130-045-02-05-3300-xl-extension-cables","title":"Bently Nevada 330130-045-02-05 3300 XL Extension Cables","description":"\u003cp\u003eThe 330130-045-02-05, also cataloged as the 3300 XL 8mm Extension Cables, serves as the essential interconnect component between the proximity probe and the Proximitor sensor in vibration monitoring systems. By providing a low-loss transmission path for the high-frequency carrier signal, this cable ensures accurate signal integrity for radial vibration and axial position measurement. Engineered to maintain consistent impedance, it is a critical element in the Bently Nevada 3500 series architecture, facilitating reliable data transmission in high-speed turbine and compressor monitoring environments.\u003c\/p\u003e\n\u003ch3\u003eModel Configuration Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330130\u003c\/strong\u003e: 3300 XL 8mm Extension Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e045\u003c\/strong\u003e: 4.5 meters (14.8 feet) cable length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e02\u003c\/strong\u003e: Miniature coaxial ClickLoc connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e05\u003c\/strong\u003e: Connector and cable options (Standard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data Overview\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330130-045-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e35.0 x 30.0 x 10.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-51 to +177 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Impedance\u003c\/td\u003e\n\u003ctd\u003e75 Ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eClickLoc Miniature Coaxial\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket Material\u003c\/td\u003e\n\u003ctd\u003eFluoroplastic (FEP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eSignal Integrity and Impedance Matching\u003c\/h3\u003e\n\u003cp\u003eThe 330130-045-02-05 is precision-engineered to maintain a characteristic impedance of 75 Ohms, which is vital for the frequency-modulated signal generated by the 3300 XL transducer system. The assembly utilizes high-quality coaxial cabling and gold-plated ClickLoc connectors to prevent signal degradation caused by contact resistance or oxidation. This specific length is calibrated to match the Proximitor sensor’s inductive reactance, ensuring the system remains within its specified linear range for accurate rotor dynamics interpretation. The FEP jacket provides resistance to petroleum-based lubricants and harsh chemical environments.\u003c\/p\u003e\n\u003ch3\u003eDelivery Package Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 330130-045-02-05 Extension Cable\u003c\/li\u003e\n\u003cli\u003e1 x Installation and Setup Manual\u003c\/li\u003e\n\u003cli\u003e1 x Connector Protection Caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation and Site Integration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting Guidelines\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eRoute the extension cable through dedicated electrical conduits, separate from high-voltage power cables, to minimize electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eAvoid sharp bends that could deform the coaxial geometry; maintain a minimum bend radius of at least 5 cm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Care\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eInspect the ClickLoc connectors for cleanliness and debris before mating; secure the locking mechanism until a distinct tactile \"click\" is felt.\u003c\/li\u003e\n\u003cli\u003eUse protective caps if the cable must remain disconnected for any duration to prevent contamination of the gold-plated surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Sealing\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure all cable penetrations into junction boxes are properly sealed to prevent the ingress of industrial lubricants or moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperational FAQ\u003c\/h3\u003e\n\u003cp\u003eQ: Is this extension cable compatible with older 3300 series probes?\u003c\/p\u003e\n\u003cp\u003eA: The 330130 is specifically designed for the 3300 XL system; refer to the compatibility matrix if mixing with legacy 3300 components.\u003c\/p\u003e\n\u003cp\u003eQ: Can I cut the extension cable to a shorter length?\u003c\/p\u003e\n\u003cp\u003eA: No. Altering the length of the cable changes the system’s electrical tuning and will void the calibration accuracy.\u003c\/p\u003e\n\u003cp\u003eQ: What is the purpose of the ClickLoc connector?\u003c\/p\u003e\n\u003cp\u003eA: It ensures a constant-pressure, vibration-resistant connection that prevents intermittent signal loss in high-vibration applications.\u003c\/p\u003e\n\u003cp\u003eQ: How should I handle excess cable length?\u003c\/p\u003e\n\u003cp\u003eA: Excess cable should be coiled in a wide loop (no less than 10 cm diameter) and secured with non-abrasive ties.\u003c\/p\u003e\n\u003cp\u003eQ: Is the cable jacket resistant to oil?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the FEP (Fluorinated Ethylene Propylene) jacket is designed to withstand exposure to standard industrial synthetic and mineral oils.\u003c\/p\u003e\n\u003cp\u003eQ: Does the cable length affect the Proximitor calibration?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the system is calibrated for the specific total length; ensure the extension length matches the system requirements.\u003c\/p\u003e\n\u003cp\u003eQ: What happens if the connector is not fully locked?\u003c\/p\u003e\n\u003cp\u003eA: Incomplete locking can result in high-frequency noise or \"signal dropout,\" leading to erroneous vibration readings or false trips.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518763622573,"sku":"330130-045-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330130-045-02-05-i-o-interface-rknghqf3fdk.jpg?v=1766977068","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330130-045-02-05-3300-xl-extension-cables","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}