{"product_id":"bently-nevada-330104-00-16-05-02-05-proximity-probes-3300-xl-series","title":"Bently Nevada 330104-00-16-05-02-05 Proximity Probes 3300 XL Series","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBently Nevada 330104-00-16-05-02-05\u003c\/strong\u003e, also cataloged as the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e330104\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProximity Probes, operates as a dedicated hardware component for contactless eddy-current displacement sensing within 3500 Monitoring System platforms.\u003c\/p\u003e\n\u003ch3\u003eVariant Model Coding Option Breakdown\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e330104\u003c\/strong\u003e: 3300 XL 8 mm Proximity Probe with M10 x 1 thread, non-armored configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e00\u003c\/strong\u003e: Unthreaded length (0 mm specification).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e16\u003c\/strong\u003e: Overall case length (160 mm specification).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Total electrical cable length (0.5 meter \/ 1.6 feet option).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e02\u003c\/strong\u003e: Miniature coaxial ClickLoc connector, standard male plug.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e05\u003c\/strong\u003e: Multiple hazardous area approvals certification option.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCore Physical and Electrical Parameters\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eModel\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e330104-00-16-05-02-05\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBrand\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBently Nevada\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOrigin\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnited States\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0.14 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eShipping Dimensions\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20.0 cm x 20.0 cm x 4.0 cm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eOperating Temp\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e-51 deg C to +177 deg C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePower Consumption\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePassive sensor element (Sourced via RF drive from Proximitor Sensor loop)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSystem Target Calibration\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAISI 4140 high-conductivity carbon steel\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eSensor Tip Size\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e8 mm outer diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eDynamic Measuring Window\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e2.0 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eNominal Scale Factor\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e7.87 V\/mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics Integration\u003c\/h3\u003e\n\u003cp\u003eThe physical operation depends on precise eddy-current probe scaling to translate target displacements into high-frequency impedance shifts. Field verification requires strict gap voltage validation (-10 VDC targets) across the linear range to ensure correct calibration profiles. This constant parameter is utilized by processing monitors to determine high-frequency vibration components and static thermal growth shifts inside fluid-film bearing housings, mapping real-time rotor dynamics. To minimize signal errors in multi-probe arrangements, internal element geometry provides cross-talk suppression when adjacent probes are situated near the identical shaft axis location.\u003c\/p\u003e\n\u003ch3\u003eEngineering Technical Inquiries\u003c\/h3\u003e\n\u003cp\u003eQ: What specific hardware steps must be executed if the gap voltage validation (-10 VDC targets) cannot be achieved during mechanical adjustment?\u003c\/p\u003e\n\u003cp\u003eA: Check the physical clearance between the probe face and the target. Mechanical adjustment requires turning the probe body within the mounting bracket while measuring the DC voltage at the Proximitor output terminals until the exact -10 VDC baseline value is established.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swap termination of the miniature coaxial ClickLoc connector supported while the Proximitor is energized?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The probe is a passive component operating on low-voltage RF signals supplied by the Proximitor. Unplugging or connecting the ClickLoc terminal while energized does not damage the internal circuitry or the sensor tip.\u003c\/p\u003e\n\u003cp\u003eQ: What electrical degradation occurs if the 0.5-meter probe is paired with an incorrect length extension cable?\u003c\/p\u003e\n\u003cp\u003eA: The total system calibration requires a fixed electrical length. Combining this 0.5-meter probe with an incompatible extension cable model shifts the resonant frequency, altering the nominal 7.87 V\/mm scale factor and causing measurement errors.\u003c\/p\u003e\n\u003ch3\u003eMechanical Installation and Electrical Grounding Protocol\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSide-Clearance Boundaries\u003c\/strong\u003e: Maintain a minimum unobstructed radius of 16 mm from the center axis of the probe tip to prevent adjacent metal structures from introducing stray eddy-current loads.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Limitations\u003c\/strong\u003e: When anchoring the M10 x 1 threads into the tapped housing, do not exceed a maximum mounting torque of 4.5 N-m to prevent internal thread deformation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCoaxial Connector Isolation\u003c\/strong\u003e: Insulate the ClickLoc coaxial union using specialized self-fusing silicone tape to prevent direct physical contact with fluid contaminants or machine ground planes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eShield Continuity Routing\u003c\/strong\u003e: Route the outer coaxial shield without interruptions to the terminal block of the Proximitor. Ground the shield at the monitor enclosure side only; do not attach the shield to the machinery frame.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial Manifest and Packaging Content\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003eOne (1) Bently Nevada 330104-00-16-05-02-05 3300 XL 8 mm Proximity Probe assembly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne (1) Coaxial interface protection boot.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-density industrial component box insert.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLogistics Dispatch Parameters\u003c\/h3\u003e\n\u003cul class=\"list-paddingleft-2\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLogistics Windows\u003c\/strong\u003e: Orders are scheduled for shipment within 2-7 days when payment finish, utilizing international express carriers such as DHL, FEDEX, or UPS.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eElectrostatic Control\u003c\/strong\u003e: Shipments are encased in anti-static industrial packaging shield barriers to verify protection against electrostatic discharges prior to point-of-use site unpacking.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":45518835679405,"sku":"330104-00-16-05-02-05","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/1613\/9181\/files\/bently-nevada-330104-00-16-05-02-05-3300-xl-8-mm-proximity-probes-zjvbxeiajgc.jpg?v=1766980021","url":"https:\/\/www.maxwellplc.com\/products\/bently-nevada-330104-00-16-05-02-05-proximity-probes-3300-xl-series","provider":"Maxwell PLC Ltd","version":"1.0","type":"link"}